Hi Angelo =O) Thanks for answering. I didn't have an .xorg.conf - that's usually a left over from some other time - could you post me your working file, please?
Could you also send me the output of the following on your working system, please? o ls -l /dev/dri o modinfo | grep radeon And you /var/log/Xorg.0.log would be useful, too. Just to see if I can spot the difference. I figure I've over configured myself into a corner here with other changes =O} Thanks, Mark On Fri, 2008-01-25 at 15:14 -0500, Angelo Rajadurai wrote: > Hey Mark: > > I got it to work on my 3400. I'm on snv_78. Pretty straight forward. > I downloaded the radeon 3D driver from > http://opensolaris.org/os/project/dri/files/ > > I had to copy the /etc/X11/.xorg.conf to /etc/X11/xorg.conf and then add > Option "BusType" "PCI" > > Then I rebooted and installed compiz with the --with-experimental-ati- > support > option. It feels pretty zappy even with the 1GB mem I have on the > system. > > Let me know if need more info > > -Angelo > > > On Jan 25, 2008, at 3:06 PM, Mark R. Bowyer wrote: > > > Hi, > > > > I've been having fun trying to get this working on my Ferrari 3400. > > Anyone else had any luck? > > > > Firstly, the driver installer needs to be run without Xorg running. > > And > > the 3400 can't work in text console mode, so I had to ssh in from an > > iMac. That worked ok - "svcadm disable gdm"; "install.sh install"; > > "svcadm enable gdm". > > > > I then install compiz. The wget script to check if it would run said > > no, because at that stage I'd not edited my xorg.conf, so the radeon > > driver wasn't in. But the compiz installer does that. > > > > My next problem was that I was using Darren's multi headed xorg.conf, > > and DRI isn't compatible with multiple heads yet. So I tried out the > > SingleLayout and the CloneLayout, and neither worked much better. > > Mind > > you, the: > > > > Option "AIGLX" "True" > > > > is only added to the currently active layout by the installers, so > > that > > needed adding. > > > > My main problem seems to be that neither drm nor radeon are being > > modloaded by the kernel. I can "modload -p misc/drm" OK, but "modload > > -p drv/radeon" fails with "can't load module: No such device or > > address". Which is odd, because it shows in prtconf -v as: > > > > value='pci1002,4e50.1025.57.0' + > > 'pci1002,4e50.1025.57' + 'pci1025,57' + 'pci1002,4e50.0' + > > 'pci1002,4e50' + 'pciclass,030000' + 'pciclass,0300' > > > > and: > > > > 9 ]grep 4e50 driver* > > driver_aliases:radeon "pci1002,4e50" > > > > So it should work, no? I've done a "reboot -- -r" and that didn't > > help. > > Xorg finds my card and it's supported by *its* radeon driver. Until > > (from /var/log/Xorg.0.log): > > > > : > > (--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP > > (AGP)" (ChipID = 0x4e50) > > (--) RADEON(0): Linear framebuffer at 0xd8000000 > > (II) RADEON(0): AGP card detected > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is -1, (No such device or address) > > drmOpenDevice: open result is -1, (No such device or address) > > drmOpenDevice: Open failed > > [drm] failed to load kernel module "radeon" > > (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM > > [dri] Disabling DRI. > > : > > > > /dev/dri exists since I modloaded the drm module, but didn't before. > > And it's empty =O( > > > > Anyone got any further ideas? > > > > Ta, > > Mark. > > > > > > On Fri, 2008-01-25 at 17:19 +0100, Erwann Chenede wrote: > >> Hi All, > >> > >> I've updated my compiz easy install bundle and my configuration > >> check script to support > >> the ATI radeon driver developed by Minskey. > >> > >> So far it's only been tested on Ferrari 4000 laptop. > >> > >> Details can be found here : > >> http://blogs.sun.com/erwann/entry/ati_support_for_compiz_easy > >> > >> Cheers, > >> > >> Erwann > >> > > -- > > | o o Software Support > > Engineering, > > /v\ark R. Bowyer. SPARC House, Guillemont Park, > > `-' Minley Rd, Blackwater, > > Tel: +44 (0)1252 420691 Camberley, SURREY, GU17 9QG > > Fax: +44 (0)1252 421658 United Kingdom __| > > > > > > _______________________________________________ > > desktop-discuss mailing list > > desktop-discuss at opensolaris.org > -- | o o Software Support Engineering, /v\ark R. Bowyer. SPARC House, Guillemont Park, `-' Minley Rd, Blackwater, Tel: +44 (0)1252 420691 Camberley, SURREY, GU17 9QG Fax: +44 (0)1252 421658 United Kingdom __|
