Hi Minskey and Erwann, thank you both for looking into this.
I'm guessing my OS install is too old, and will upgrade to snv_81 when
I'm next in the office (Friday I think).
But in case it helps, a relevant section of my /var/dt/Xerrors file
goes:
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: SunOS 5.11 snv_72 i86pc
Current Operating System: SunOS marksferrari 5.11 snv_75 i86pc
Build Date: 26 September 2007
Solaris ABI: 64-bit
SUNWxorg-server package version: 6.9.0.5.11.7500,REV=0.2007.09.26
SUNWxorg-graphics-ddx package version: 6.9.0.5.11.7500,REV=0.2007.09.26
SUNWxorg-mesa package version: 6.9.0.5.11.7500,REV=0.2007.09.26
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 25 17:27:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(EE) LoadModule: Module bitstream does not have a bitstreamModuleData
data object.
(EE) Failed to load module "bitstream" (invalid module, 0)
dlopen: ld.so.1: Xorg: fatal: relocation error:
file /usr/X11/lib/modules/fonts/amd64//libtype1.so: symbol
Type1RegisterFontFileFunctions: referenced symbol not found
(EE) Failed to load /usr/X11/lib/modules/fonts/amd64//libtype1.so
(EE) Failed to load module "type1" (loader failed, 7)
(II) Module "ddc" already built-in
(II) Module "i2c" already built-in
(II) Module "ddc" already built-in
(II) Module "ramdac" already built-in
(II) Module "ddc" already built-in
(II) Module "i2c" already built-in
(II) Module "ramdac" already built-in
(EE) AIGLX: DRI module not loaded
(EE) AIGLX: DRI module not loaded
X connection to :0.0 broken (explicit kill or server shutdown).
FreeFontPath: FPE "/usr/X11/lib/X11/fonts/misc/" refcount is 2, should
be 1; fixing.
and the following files are attached:
Xorg.0.log latest log output (using Angelo's xorg.conf)
xorg.conf.orig My original one, Darren's fix for 3400 projector use
xorg.conf.angelo What I'm using now, works for Angelo on b78
".compiz.bad Where I got to converting my old one to work.
I hope you find this useful, and thanks again for helping out.
Ta,
Mark.
On Mon, 2008-01-28 at 16:49 +0800, minskey guo wrote:
> Hi, Mark,
>
> I just installed a snv_75 from scratch, and add
>
> Option "BusType" "PCI"
>
> to ATI device section of xorg.conf. And then, I installed compzi via
> Erwann's
> compiz bundle. It works.
>
>
> If you cannot set up compiz on F3400, can you send me xorg.conf,
> /var/log/Xorg.0.log, /var/dt/Xerror if exists.
>
>
> -minskey
>
>
> Mark R. Bowyer ??????:
> > Hi Angelo =O)
> >
> > Thanks for answering. I didn't have an .xorg.conf - that's usually a
> > left over from some other time - could you post me your working file,
> > please?
> >
> > Could you also send me the output of the following on your working
> > system, please?
> >
> > o ls -l /dev/dri
> > o modinfo | grep radeon
> >
> > And you /var/log/Xorg.0.log would be useful, too. Just to see if I can
> > spot the difference. I figure I've over configured myself into a corner
> > here with other changes =O}
> >
> > Thanks,
> > Mark
> >
> >
> > On Fri, 2008-01-25 at 15:14 -0500, Angelo Rajadurai wrote:
> >
> >> Hey Mark:
> >>
> >> I got it to work on my 3400. I'm on snv_78. Pretty straight forward.
> >> I downloaded the radeon 3D driver from
> >> http://opensolaris.org/os/project/dri/files/
> >>
> >> I had to copy the /etc/X11/.xorg.conf to /etc/X11/xorg.conf and then add
> >> Option "BusType" "PCI"
> >>
> >> Then I rebooted and installed compiz with the --with-experimental-ati-
> >> support
> >> option. It feels pretty zappy even with the 1GB mem I have on the
> >> system.
> >>
> >> Let me know if need more info
> >>
> >> -Angelo
> >>
> >>
> >> On Jan 25, 2008, at 3:06 PM, Mark R. Bowyer wrote:
> >>
> >>
> >>> Hi,
> >>>
> >>> I've been having fun trying to get this working on my Ferrari 3400.
> >>> Anyone else had any luck?
> >>>
> >>> Firstly, the driver installer needs to be run without Xorg running.
> >>> And
> >>> the 3400 can't work in text console mode, so I had to ssh in from an
> >>> iMac. That worked ok - "svcadm disable gdm"; "install.sh install";
> >>> "svcadm enable gdm".
> >>>
> >>> I then install compiz. The wget script to check if it would run said
> >>> no, because at that stage I'd not edited my xorg.conf, so the radeon
> >>> driver wasn't in. But the compiz installer does that.
> >>>
> >>> My next problem was that I was using Darren's multi headed xorg.conf,
> >>> and DRI isn't compatible with multiple heads yet. So I tried out the
> >>> SingleLayout and the CloneLayout, and neither worked much better.
> >>> Mind
> >>> you, the:
> >>>
> >>> Option "AIGLX" "True"
> >>>
> >>> is only added to the currently active layout by the installers, so
> >>> that
> >>> needed adding.
> >>>
> >>> My main problem seems to be that neither drm nor radeon are being
> >>> modloaded by the kernel. I can "modload -p misc/drm" OK, but "modload
> >>> -p drv/radeon" fails with "can't load module: No such device or
> >>> address". Which is odd, because it shows in prtconf -v as:
> >>>
> >>> value='pci1002,4e50.1025.57.0' +
> >>> 'pci1002,4e50.1025.57' + 'pci1025,57' + 'pci1002,4e50.0' +
> >>> 'pci1002,4e50' + 'pciclass,030000' + 'pciclass,0300'
> >>>
> >>> and:
> >>>
> >>> 9 ]grep 4e50 driver*
> >>> driver_aliases:radeon "pci1002,4e50"
> >>>
> >>> So it should work, no? I've done a "reboot -- -r" and that didn't
> >>> help.
> >>> Xorg finds my card and it's supported by *its* radeon driver. Until
> >>> (from /var/log/Xorg.0.log):
> >>>
> >>> :
> >>> (--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP
> >>> (AGP)" (ChipID = 0x4e50)
> >>> (--) RADEON(0): Linear framebuffer at 0xd8000000
> >>> (II) RADEON(0): AGP card detected
> >>> drmOpenDevice: node name is /dev/dri/card0
> >>> drmOpenDevice: open result is -1, (No such device or address)
> >>> drmOpenDevice: open result is -1, (No such device or address)
> >>> drmOpenDevice: Open failed
> >>> [drm] failed to load kernel module "radeon"
> >>> (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
> >>> [dri] Disabling DRI.
> >>> :
> >>>
> >>> /dev/dri exists since I modloaded the drm module, but didn't before.
> >>> And it's empty =O(
> >>>
> >>> Anyone got any further ideas?
> >>>
> >>> Ta,
> >>> Mark.
> >>>
> >>>
> >>> On Fri, 2008-01-25 at 17:19 +0100, Erwann Chenede wrote:
> >>>
> >>>> Hi All,
> >>>>
> >>>> I've updated my compiz easy install bundle and my configuration
> >>>> check script to support
> >>>> the ATI radeon driver developed by Minskey.
> >>>>
> >>>> So far it's only been tested on Ferrari 4000 laptop.
> >>>>
> >>>> Details can be found here :
> >>>> http://blogs.sun.com/erwann/entry/ati_support_for_compiz_easy
> >>>>
> >>>> Cheers,
> >>>>
> >>>> Erwann
> >>>>
> >>>>
> >>> --
> >>> | o o Software Support
> >>> Engineering,
> >>> /v\ark R. Bowyer. SPARC House, Guillemont Park,
> >>> `-' Minley Rd, Blackwater,
> >>> Tel: +44 (0)1252 420691 Camberley, SURREY, GU17 9QG
> >>> Fax: +44 (0)1252 421658 United Kingdom __|
> >>>
> >>>
> >>> _______________________________________________
> >>> desktop-discuss mailing list
> >>> desktop-discuss at opensolaris.org
> >>>
>
--
| o o Software Support Engineering,
/v\ark R. Bowyer. SPARC House, Guillemont Park,
`-' Minley Rd, Blackwater,
Tel: +44 (0)1252 420691 Camberley, SURREY, GU17 9QG
Fax: +44 (0)1252 421658 United Kingdom __|
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log
Type: text/x-log
Size: 37540 bytes
Desc: not available
URL:
<http://mail.opensolaris.org/pipermail/desktop-discuss/attachments/20080128/2c05f6c9/attachment.bin>
-------------- next part --------------
#
# Darren J Moffat
# Based on work done by Casper Dik and Bart Smaalders
#
# This file has four server layouts: Single, Clone, DualHead and Xinerama
# The intents is that separate SMF instances be used to switch between them.
# See Xserver(1) and smf(5).
Section "ServerFlags"
Option "HandleSpecialKeys" "Always"
Option "DefaultServerLayout" "DualHeadLayout"
EndSection
Section "ServerLayout"
Identifier "DualHeadLayout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "USBMouse"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "XineramaLayout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Option "Xinerama" "true"
InputDevice "USBMouse"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "CloneLayout"
Screen 0 "CloneScreen" 0 0
InputDevice "USBMouse"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "SingleLayout"
Screen 0 "Screen0" 0 0
InputDevice "USBMouse"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11/lib/X11/rgb"
ModulePath "/usr/X11/lib/modules"
FontPath "/usr/X11/lib/X11/fonts/TrueType/"
FontPath "/usr/X11/lib/X11/fonts/Type1/"
FontPath "/usr/X11/lib/X11/fonts/Type1/sun/"
FontPath "/usr/X11/lib/X11/fonts/F3bitmaps/"
FontPath "/usr/X11/lib/X11/fonts/misc/"
FontPath "/usr/X11/lib/X11/fonts/100dpi/"
FontPath "/usr/X11/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "IA"
# Load "Xst"
Load "dbe"
Load "extmod"
Load "record"
Load "xtrap"
Load "bitstream"
Load "type1"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "USBMouse"
Driver "mouse"
Option "Protocol" "VUID"
Option "Device" "/dev/mouse"
Option "SendCoreEvents"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/kdmouse"
Option "Emulate3Buttons" "true"
Option "SendCoreEvents"
Option "EdgeScroll" "true"
Option "BottomScroll" "true"
Option "LefHanded" "false"
Option "Mickeys" "12"
Option "Sensitivity" "25"
Option "Tapping" "true"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "IDT"
ModelName "2"
EndSection
Section "Monitor"
Identifier "Monitor1"
EndSection
Section "Device"
Screen 0
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
Option "MonitorLayout" "LVDS,CRT"
Option "BusType" "PCI"
EndSection
Section "Device"
Screen 1
Identifier "Card1"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
Option "MonitorLayout" "LVDS,CRT"
EndSection
Section "Device"
Screen 0
Identifier "CloneCard"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
Option "MergedFB" "true"
Option "CRT2Position" "Clone"
Option "CRT2HSync" "31-60"
Option "CRT2VRefresh" "50-75"
Option "MetaModes" "1400x1050-1024x768 1280x1024-1280x1024
1280x1024-1024x768 1024x768-1024x768 800x600-800x600 640x480-640x480"
Option "MonitorLayout" "LVDS, CRT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "CloneScreen"
Device "CloneCard"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
-------------- next part --------------
Section "ServerLayout"
Identifier "X.org Configured"
Option "AIGLX" "True"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "Files"
RgbPath "/usr/X11/lib/X11/rgb"
ModulePath "/usr/X11/lib/modules/amd64"
FontPath "/usr/X11/lib/X11/fonts/TrueType/"
FontPath "/usr/X11/lib/X11/fonts/Type1/"
FontPath "/usr/X11/lib/X11/fonts/Type1/sun/"
FontPath "/usr/X11/lib/X11/fonts/F3bitmaps/"
FontPath "/usr/X11/lib/X11/fonts/misc/"
FontPath "/usr/X11/lib/X11/fonts/100dpi/"
FontPath "/usr/X11/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "IA"
Load "dbe"
Load "extmod"
Load "record"
Load "xtrap"
Load "GLcore"
Load "glx"
Load "dri"
Load "xtsol"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 300 230 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "f03"
EndSection
Section "Device"
### Available Driver options are:-
Option "GARTSize" "64"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
Option "AGPMode" "4"
Option "DynamicClocks" "True"
Option "EnableDepthMoves" "True"
Option "ColorTiling" "True"
Option "DMAForXv" "True"
Option "AccelDFS" "True"
Option "AccelMethod" "XAA"
Option "XAANoOffscreenPixmaps" "True"
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Option "BusType" "PCI"
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "MergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "BIOSHotkeys" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "ConstantDPI" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
-------------- next part --------------
#
# Darren J Moffat
# Based on work done by Casper Dik and Bart Smaalders
#
# This file has four server layouts: Single, Clone, DualHead and Xinerama
# The intents is that separate SMF instances be used to switch between them.
# See Xserver(1) and smf(5).
Section "ServerFlags"
Option "HandleSpecialKeys" "Always"
Option "DefaultServerLayout" "CloneLayout"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "ServerLayout"
Identifier "DualHeadLayout"
Option "AIGLX" "True"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "USBMouse"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "XineramaLayout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Option "Xinerama" "true"
InputDevice "USBMouse"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "CloneLayout"
Screen 0 "CloneScreen" 0 0
Option "AIGLX" "True"
InputDevice "USBMouse"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "SingleLayout"
Screen 0 "Screen0" 0 0
Option "AIGLX" "True"
InputDevice "USBMouse"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11/lib/X11/rgb"
ModulePath "/usr/X11/lib/modules"
FontPath "/usr/X11/lib/X11/fonts/TrueType/"
FontPath "/usr/X11/lib/X11/fonts/Type1/"
FontPath "/usr/X11/lib/X11/fonts/Type1/sun/"
FontPath "/usr/X11/lib/X11/fonts/F3bitmaps/"
FontPath "/usr/X11/lib/X11/fonts/misc/"
FontPath "/usr/X11/lib/X11/fonts/100dpi/"
FontPath "/usr/X11/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "IA"
# Load "Xst"
Load "dbe"
Load "extmod"
Load "record"
Load "xtrap"
Load "bitstream"
Load "type1"
Load "glx"
Load "GLcore"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "USBMouse"
Driver "mouse"
Option "Protocol" "VUID"
Option "Device" "/dev/mouse"
Option "SendCoreEvents"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/kdmouse"
Option "Emulate3Buttons" "true"
Option "SendCoreEvents"
Option "EdgeScroll" "true"
Option "BottomScroll" "true"
Option "LefHanded" "false"
Option "Mickeys" "12"
Option "Sensitivity" "25"
Option "Tapping" "true"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "IDT"
ModelName "2"
EndSection
Section "Monitor"
Identifier "Monitor1"
EndSection
Section "Device"
Screen 0
Option "GARTSize" "64"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
Option "AGPMode" "4"
Option "no_dri" "no"
Option "DynamicClocks" "True"
Option "EnableDepthMoves" "True"
Option "ColorTiling" "True"
Option "DMAForXv" "True"
Option "AccelDFS" "True"
Option "AccelMethod" "XAA"
Option "XAANoOffscreenPixmaps" "True"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
Option "MergedFB" "true"
Option "CRT2Position" "Clone"
Option "CRT2HSync" "31-60"
Option "CRT2VRefresh" "50-75"
Option "MetaModes" "1400x1050-1024x768 1280x1024-1280x1024
1280x1024-1024x768 1024x768-1024x768 800x600-800x600 640x480-640x480"
Option "MonitorLayout" "LVDS,CRT"
Option "BusType" "PCI"
EndSection
Section "Device"
Screen 1
Identifier "Card1"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
Option "MonitorLayout" "LVDS,CRT"
EndSection
Section "Device"
Screen 0
Identifier "CloneCard"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
Option "MergedFB" "true"
Option "CRT2Position" "Clone"
Option "CRT2HSync" "31-60"
Option "CRT2VRefresh" "50-75"
Option "MetaModes" "1400x1050-1024x768 1280x1024-1280x1024
1280x1024-1024x768 1024x768-1024x768 800x600-800x600 640x480-640x480"
Option "MonitorLayout" "LVDS, CRT"
Option "BusType" "PCI"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "CloneScreen"
Device "CloneCard"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
