Hi again, I'm using Angelo's xorg.conf, but it's not working still. He's showing:
bash-3.2# ls -l /dev/dri total 2 lrwxrwxrwx 1 root root 51 Jan 25 11:50 card0 -> ../../devices/pci at 0,0/pc i1106,b188 at 1/display at 0:drm0 bash-3.2# modinfo | grep radeon 83 fffffffff7aac000 250f8 264 1 radeon (radeon DRM driver 1.3) and I've got: 6 ]ll /devices/pci at 0,0/pci1106,b188 at 1/ total 3 drwxr-xr-x 3 root sys 512 Jan 25 2005 . drwxr-xr-x 17 root sys 512 May 30 2007 .. drwxr-xr-x 2 root sys 512 Jan 25 2005 display at 0 crw------- 1 root sys 99, 1 Jan 25 22:00 display at 0:agpmaster0 crw------- 1 markbo other 99, 0 Jan 25 2005 display at 0:text-0 and 3 ]modload -p drv/radeon can't load module: No such device or address so it's something before X even starts? Thanks Angelo, but I have something else wrong. I'm running snv_75 and frkit. Anyone got any suggestions? It's gone 10pm here now, so I'm stopping for the week. And I'll try upgrading the OS if nothing else comes to me... Ta, Mark. On Fri, 2008-01-25 at 20:26 +0000, Mark R. Bowyer wrote: > Hi Angelo =O) > > Thanks for answering. I didn't have an .xorg.conf - that's usually a > left over from some other time - could you post me your working file, > please? > > Could you also send me the output of the following on your working > system, please? > > o ls -l /dev/dri > o modinfo | grep radeon > > And you /var/log/Xorg.0.log would be useful, too. Just to see if I can > spot the difference. I figure I've over configured myself into a corner > here with other changes =O} > > Thanks, > Mark > > > On Fri, 2008-01-25 at 15:14 -0500, Angelo Rajadurai wrote: > > Hey Mark: > > > > I got it to work on my 3400. I'm on snv_78. Pretty straight forward. > > I downloaded the radeon 3D driver from > > http://opensolaris.org/os/project/dri/files/ > > > > I had to copy the /etc/X11/.xorg.conf to /etc/X11/xorg.conf and then add > > Option "BusType" "PCI" > > > > Then I rebooted and installed compiz with the --with-experimental-ati- > > support > > option. It feels pretty zappy even with the 1GB mem I have on the > > system. > > > > Let me know if need more info > > > > -Angelo > > > > > > On Jan 25, 2008, at 3:06 PM, Mark R. Bowyer wrote: > > > > > Hi, > > > > > > I've been having fun trying to get this working on my Ferrari 3400. > > > Anyone else had any luck? > > > > > > Firstly, the driver installer needs to be run without Xorg running. > > > And > > > the 3400 can't work in text console mode, so I had to ssh in from an > > > iMac. That worked ok - "svcadm disable gdm"; "install.sh install"; > > > "svcadm enable gdm". > > > > > > I then install compiz. The wget script to check if it would run said > > > no, because at that stage I'd not edited my xorg.conf, so the radeon > > > driver wasn't in. But the compiz installer does that. > > > > > > My next problem was that I was using Darren's multi headed xorg.conf, > > > and DRI isn't compatible with multiple heads yet. So I tried out the > > > SingleLayout and the CloneLayout, and neither worked much better. > > > Mind > > > you, the: > > > > > > Option "AIGLX" "True" > > > > > > is only added to the currently active layout by the installers, so > > > that > > > needed adding. > > > > > > My main problem seems to be that neither drm nor radeon are being > > > modloaded by the kernel. I can "modload -p misc/drm" OK, but "modload > > > -p drv/radeon" fails with "can't load module: No such device or > > > address". Which is odd, because it shows in prtconf -v as: > > > > > > value='pci1002,4e50.1025.57.0' + > > > 'pci1002,4e50.1025.57' + 'pci1025,57' + 'pci1002,4e50.0' + > > > 'pci1002,4e50' + 'pciclass,030000' + 'pciclass,0300' > > > > > > and: > > > > > > 9 ]grep 4e50 driver* > > > driver_aliases:radeon "pci1002,4e50" > > > > > > So it should work, no? I've done a "reboot -- -r" and that didn't > > > help. > > > Xorg finds my card and it's supported by *its* radeon driver. Until > > > (from /var/log/Xorg.0.log): > > > > > > : > > > (--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP > > > (AGP)" (ChipID = 0x4e50) > > > (--) RADEON(0): Linear framebuffer at 0xd8000000 > > > (II) RADEON(0): AGP card detected > > > drmOpenDevice: node name is /dev/dri/card0 > > > drmOpenDevice: open result is -1, (No such device or address) > > > drmOpenDevice: open result is -1, (No such device or address) > > > drmOpenDevice: Open failed > > > [drm] failed to load kernel module "radeon" > > > (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM > > > [dri] Disabling DRI. > > > : > > > > > > /dev/dri exists since I modloaded the drm module, but didn't before. > > > And it's empty =O( > > > > > > Anyone got any further ideas? > > > > > > Ta, > > > Mark. > > > > > > > > > On Fri, 2008-01-25 at 17:19 +0100, Erwann Chenede wrote: > > >> Hi All, > > >> > > >> I've updated my compiz easy install bundle and my configuration > > >> check script to support > > >> the ATI radeon driver developed by Minskey. > > >> > > >> So far it's only been tested on Ferrari 4000 laptop. > > >> > > >> Details can be found here : > > >> http://blogs.sun.com/erwann/entry/ati_support_for_compiz_easy > > >> > > >> Cheers, > > >> > > >> Erwann > > >> > > > -- > > > | o o Software Support > > > Engineering, > > > /v\ark R. Bowyer. SPARC House, Guillemont Park, > > > `-' Minley Rd, Blackwater, > > > Tel: +44 (0)1252 420691 Camberley, SURREY, GU17 9QG > > > Fax: +44 (0)1252 421658 United Kingdom __| > > > > > > > > > _______________________________________________ > > > desktop-discuss mailing list > > > desktop-discuss at opensolaris.org > > -- | o o Software Support Engineering, /v\ark R. Bowyer. SPARC House, Guillemont Park, `-' Minley Rd, Blackwater, Tel: +44 (0)1252 420691 Camberley, SURREY, GU17 9QG Fax: +44 (0)1252 421658 United Kingdom __|
