Sorry, somehow I only sent a Reply instead of Reply All. Thank you again Viral Wang. Worked like a charm. So do I need to rerun
$ rm -rf objdir-gecko/ out/ backup-flame/ $ ./config.sh flame openc.xml before building gecko again? Or can I transition directly to building after doing "git pull"? Also, is it normal to lose all user account settings after each installation? Because I have had to rerun the first-run setup again. Also, the Open C page on MDN lacks a link to the openc.xml file. *-- Bitmessage <http://bitmessage.org/> me* *BM-2D97QV3Y4VRfjayrWahqE61XKuQw6dJvj6* On 29 May 2014 04:15, Viral Wang <vw...@mozilla.com> wrote: > Hi Rewarp, > > Maybe you should update gaia after ./flash.sh gecko > > > $ ./build.sh gecko > > $ ./flash.sh gecko > > $ cd gaia > > $ make reset-gaia > > Regards, > viral > > ----- Original Message ----- > From: "Rewarp" <rew...@gmail.com> > To: "Chris Mills" <cmi...@mozilla.com> > Cc: "Viral Wang" <vw...@mozilla.com>, "Kobalt Kitsuné" < > cobaltfo...@gmail.com>, "mozilla-dev-b2g" < > mozilla-dev-...@lists.mozilla.org> > Sent: Thursday, May 29, 2014 4:50:28 PM > Subject: Re: [b2g] ZTE Open C > > Thanks for the work Viral Wang. I was able to run the build script but it > is now stuck on the boot screen with the fox animation after doing > ./flash.sh gecko. It's still stuck in the loop. Any advice? > > > *--Bitmessage <http://bitmessage.org/> me* > *BM-2D97QV3Y4VRfjayrWahqE61XKuQw6dJvj6* > > > On 29 May 2014 03:04, Chris Mills <cmi...@mozilla.com> wrote: > > > Thanks for the help on this Viral/Kobalt/others! > > > > So I have updated the information on MDN. First, this section has been > > updated according to Viral’s instructions on the bug: > > > > > > > https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/ZTE_OPEN_C#Upgrading_Gecko_and_Gaia > > > > Can you verify that this is ok? > > > > Second, can you confirm whether these instructions for upgrading Gaia > only > > are ok? > > > > > > > https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/ZTE_OPEN_C#Upgrading_Gaia > > > > If they don’t work, can they be upgraded to work, or should I just delete > > the section completely? > > > > Best regards, > > > > Chris Mills > > Senior tech writer || Mozilla > > developer.mozilla.org || MDN > > cmi...@mozilla.com || @chrisdavidmills > > > > > > > > On 29 May 2014, at 04:28, Viral Wang <vw...@mozilla.com> wrote: > > > > > Hi Kobalt, > > > > > > Maybe you can do "make reset-gaia" in gaia folder also? > > > If we move gecko to master branch, we should move gaia to master at > same > > time. > > > Thank you for your feedback and I think I should update it in bug > > 1016867 :) > > > > > > Here's my steps to make a clean build and I'm sure it works in my open > C > > > $ rm -rf objdir-gecko/ out/ backup-flame/ > > > $ ./config.sh flame openc.xml > > > $ ./build.sh gecko > > > $ ./flash.sh gecko > > > $ cd gaia > > > $ make reset-gaia > > > > > > Regards, > > > viral > > > > > > ----- Original Message ----- > > > From: "Kobalt Kitsuné" <cobaltfo...@gmail.com> > > > To: mozilla-dev-...@lists.mozilla.org > > > Sent: Thursday, May 29, 2014 6:41:10 AM > > > Subject: Re: [b2g] ZTE Open C > > > > > > On Wednesday, May 28, 2014 5:00:02 AM UTC-5, Viral Wang wrote: > > >> Hi, > > >> > > >> > > >> > > >> Actually Open C and flame should not used same code base. > > >> > > >> The reason that open C can use flame before is we use the build for > > msm8x10 in the beginning. > > >> > > >> After that, we add some specific features like NFC in flame. > > >> > > >> That's why some of errors happened if you only have open C in your > hand. > > >> > > >> > > >> > > >> https://bugzilla.mozilla.org/show_bug.cgi?id=1016867#c1 > > >> > > >> Here's a quick fix to use the first version for device-flame. > > >> > > >> That's pretty close to pure msm8x10 from CAF should work for open C > > >> > > >> > > >> > > >> Regards, > > >> > > >> viral > > > > > > Hello viral, I tried using the manifest (openc.xml) that was provided > in > > the link, but after flashing the phone seems to be stuck in a boot loop. > > I've factory reset the phone thinking that would fix it, but that didn't > do > > anything. One thing that may shed some light on this was when I went into > > adb shell and navigated to /system/b2g on the device, I then ran ./b2g > and > > it gave me: > > > > > > CANNOT LINK EXECUTABLE: could not load library "libmozglue.so" needed > by > > "./b2g"; caused by library "libmozglue.so" not found > > > > > > Does anyone have any ideas about how to correct this? > > > > > > Thanks, > > > > > > Kobalt > > > _______________________________________________ > > > dev-b2g mailing list > > > dev-b2g@lists.mozilla.org > > > https://lists.mozilla.org/listinfo/dev-b2g > > > _______________________________________________ > > > dev-b2g mailing list > > > dev-b2g@lists.mozilla.org > > > https://lists.mozilla.org/listinfo/dev-b2g > > > > _______________________________________________ > > dev-b2g mailing list > > dev-b2g@lists.mozilla.org > > https://lists.mozilla.org/listinfo/dev-b2g > > >
_______________________________________________ dev-b2g mailing list dev-b2g@lists.mozilla.org https://lists.mozilla.org/listinfo/dev-b2g