that as pending work.
________________________________________
From: Vladimir Rodionov<vladrodio...@gmail.com>
Sent: Monday, March 13, 2017 3:09 PM
To: dev@hbase.apache.org
Subject: Re: [VOTE] Backup/Restore feature for HBase 2.0, vote closing
3/11/2017
It ignores the feedback
If I "ignore" feedback, I put my comment - why? I am always open for
further discussions. If reviewer does not insist on a particular request
it will be dropped. I think it is fair.
he list is incomplete because a bunch of
follow-ons came of the review cycle (including moving backup/restore
out
of
core to live in its own module).
For those who were not following our lengthy conversation on a review
board, separation of a backup code into a separate module has been
done last year, but has been reverted back by request of a reviewer.
-Vladimir
On Mon, Mar 13, 2017 at 2:23 PM, Stack<st...@duboce.net> wrote:
On Fri, Mar 10, 2017 at 9:09 PM, Stack<st...@duboce.net> wrote:
On Fri, Mar 10, 2017 at 6:01 PM, Ted Yu<yuzhih...@gmail.com> wrote:
HBASE-14123 branch has been created, with Vlad's mega patch v61.
The patch put up for VOTE here was done on a branch. The call to
merge
seems to have been premature given the many cycles of review and test
that
happened subsequent (The cycles burned a bunch of dev resource).
The patch as is is now in a state where it is too big for our infra;
rb
and JIRA are creaking under the size and # of iterations.
Adding finish of new JIRAs to this merge implies a new round of
review
and
test of an already massive patch. Who is going to do this work?
Going back to a new branch seems wrong route to take.
St.Ack
To be more explicit, this patch was developed on a branch and then a
bunch
of dev resources were burned getting it into a state where it could be
merged to master. Going back to a branch to bulk up the merge so it
includes more JIRAs than the many it already incorporates is the wrong
direction for us to be headed in. It ignores the feedback given and the
work done by Vladimir slimming down an already over-broad scope. It is
also
predicated on abundant review and testing resource being on tap to
cycle
on
a feature that is useful, but non-core.
The patch is ready for merge IMO. Geoffrey makes a nice list of what is
still to do though IIRC, the list is incomplete because a bunch of
follow-ons came of the review cycle (including moving backup/restore
out
of
core to live in its own module).
The patch needs three votes to merge. I am not against merge but I am
not
voting for the patch because I do have any more time to spend on this
non-core feature and feel that a vote will have me assume a
responsibility
I will not shirk.
S
FYI
On Fri, Mar 10, 2017 at 3:30 PM, Ted Yu<yuzhih...@gmail.com>
wrote:
Thanks for the feedback, Andrew.
How about the following plan:
create branch HBASE-14123 off of master with mega patch v61 as the
first
commit (reviewed by Stack and Enis)
Vlad and I continue development (the 3 blockers) based on
HBASE-14123
branch
when all of the blockers get +1 and merged into HBASE-14123
branch,
we
propose to community for merging into branch-2 (master branch, if
branch-2
doesn't materialize for whatever reason) again
Cheers
On Fri, Mar 10, 2017 at 3:01 PM, Andrew Purtell<
apurt...@apache.org>
wrote:
Thanks for the offer but I like that you were honest about
compiling
a
list
of issues that you thought were blockers for release. Since this
proposal
is a merge into 2.0, and we are trying to release 2.0, I am -1 on
this
merge until those blockers are addressed.
I had a look at the list.
I think the documentation issue is important but not actually a
blocker.
That may be a controversial opinion, but documentation can be
back-filled
worst case. So take HBASE-17133 off the list.
Remaining are effectively HBASE-14417, HBASE-14141, and
HBASE-15227.
They
all have patches attached to the respective JIRAs so completing
this
work
won't be onerous. Get these committed and I will lift my -1. The
others
who
voted +1 on this thread surely can help with that.
Thanks.
On Fri, Mar 10, 2017 at 2:32 PM, Vladimir Rodionov<
vladrodio...@gmail.com>
wrote:
No problem I will downgrade Blockers to Majors if it scares
you,
Andrew
🙂
Sent from my iPhone
On Mar 10, 2017, at 1:52 PM, Andrew Purtell<
apurt...@apache.org
wrote:
I know the merge of this feature has lagged substantially. I
think
that
is
regrettable but on another thread we are lamenting that 2.0
is
already
late. Unless I misunderstand, this is a proposal to merge
something
with
known blockers into trunk before we branch it for 2.0 which
will
effectively prevent that release because these blockers will
be
there. I
am
inclined to veto. Probably we should not propose branch
merges
into
code
we
are trying to get out the door with known blockers. Why not
do
that
work
first? It seems an obvious question. Perhaps I am missing
something.
If we can branch for 2.0 now and then merge this, and not
into
the
2.0
branch, I would vote +1 for branch merge even with known
blockers
pending.
On Fri, Mar 10, 2017 at 1:42 PM, Vladimir Rodionov<
vladrodio...@gmail.com>
wrote:
They are not blockers for merge - only for 2.0. GA
As I said already the feature is usable right now
We would like to continue working on master and we would
like
to
see
a
commitment from community
Sent from my iPhone
On Mar 10, 2017, at 11:16 AM, Andrew Purtell<
apurt...@apache.org
wrote:
Only BLOCKERs and CRITICALs are guaranteed for HBase 2.0
release.
If we have identified blockers, why merge this before they
are
in?
Otherwise we can't release 2.0, and it is overdue.
On Wed, Mar 8, 2017 at 1:32 PM, Vladimir Rodionov<
vladrodio...@gmail.com>
wrote:
Hello, HBase folks
For your consideration today is Backup/Restore feature for
Apache
HBAse
2.0.
Backup code is available as a mega patch in HBASE-14123
(v61),
applies
cleanly to the current master, all test PASS, patch has no
other
issues.
The patch has gone through numerous rounds of code reviews
and
has
probably
the most lengthy discussion thread on Apache JIRA
(HBASE-14123)
:)
The work has been split into 3 phases (HBASE-14030, 14123,
14414)
Two
first
are complete, third one is still in progress.
*** Summary of work HBASE-14123
The new feature introduces new command-line extensions to
the
hbase
command
and, from the client side, is accessible through
command-line
only
Operations:
* Create full backup on a list of tables or backup set
* Create incremental backup image for table list or backup
set
* Restore list of tables from a given backup image
* Show current backup progress
* Delete backup image and all related images
* Show history of backups
* Backup set operations: create backup set, add/remove
table
to/from
backup
set, etc
In the current implementation, the feature is already
usable,
meaning
that
users can backup tables and restore them using provided
command-line
tools.
Both: full and incremental backups are supported.
This work is based on original work of IBM team
(HBASE-7912).
The
full
list
of JIRAs included in this mega patch can be found in three
umbrella
JIRAs:
HBASE-14030 (Phase 1), HBASE-14123 (Phase 2) and
HBASE-14414
(Phase 3
-
all
resolved ones made it into the patch)
*** What are the remaining work items
All remaining items can be found in Phase 3 umbrella JIRA:
HBASE-14414.
They are split into 3 groups: BLOCKER, CRITICAL, MAJOR
Only BLOCKERs and CRITICALs are guaranteed for HBase 2.0
release.
***** BLOCKER
* HBASE-14417 Incremental backup and bulk loading ( Patch
available)
* HBASE-14135 HBase Backup/Restore Phase 3: Merge backup
images
* HBASE-14141 HBase Backup/Restore Phase 3: Filter WALs on
backup
to
include only edits from backup tables (Patch available)
* HBASE-17133 Backup documentation
* HBASE-15227 Fault tolerance support
***** CRITICAL
* HBASE-16465 Disable split/merges during backup
We have umbrella JIRA (HBASE-14414) to track all the
remaining
work
All the BLOCKER and CRITICAL JIRAs currently in open state
will
be
implemented by 2.0 release time. Some MAJOR too, but it
depends
on
resource
availability
The former development branch (HBASE-7912) is obsolete and
will
be
closed/deleted after the merge.
We want backup to be a GA feature in 2.0
We are going to support full backward compatibility for
backup
tool in
2.0
and onwards.
**** Configuration
Backup is disabled, by default. To enable it, the
following
configuration
properties must be added to hbase-site.xml:
hbase.backup.enable=true
hbase.master.logcleaner.plugins=YOUR_PLUGINS,org.
apache.hadoop.hbase.backup.master.BackupLogCleaner
hbase.procedure.master.classes=YOUR_CLASSES,org.
apache.hadoop.hbase.backup.master.
LogRollMasterProcedureManager
hbase.procedure.regionserver.classes=YOUR_CLASSES,org.
apache.hadoop.hbase.backup.regionserver.
LogRollRegionServerProcedureMa
nager
I would like to thank IBM team and Jerry He for original
work,
Enis, Ted, Stack, Matteo, Jerry for time spent on code
reviews
Special thanks to Ted Yu for his co-development work.
References:
https://issues.apache.org/jira/browse/HBASE-7912
(original
IBM,
contains
design doc)
https://issues.apache.org/jira/browse/HBASE-14030 (Phase
1)
https://issues.apache.org/jira/browse/HBASE-14123 (Phase
2)
https://issues.apache.org/jira/browse/HBASE-14414 (Phase
3)
Please vote +1/-1 by midnight Pacific Time (00:00
-0800 GMT) on March 11th on whether or not we should
merge
this
into
the
current master.
-Vladimir Rodionov
--
Best regards,
- Andy
If you are given a choice, you believe you have acted
freely. -
Raymond
Teller (via Peter Watts)
--
Best regards,
- Andy
If you are given a choice, you believe you have acted
freely. -
Raymond
Teller (via Peter Watts)
--
Best regards,
- Andy
If you are given a choice, you believe you have acted freely. -
Raymond
Teller (via Peter Watts)