Well, it’s there, it’s just not recognized:
01:00.0 Network controller [0280]: Intel Corporation Unknown device [8086:4232]
I don’t know enough about how the linux kernel does device recognition, but I’d
guess that the kernel you booted with didn’t have the right driver in it…
-Greg
"Humans think they are smarter than dolphins because we build cars and
buildings and start wars etc., and all that dolphins do is swim in the water,
eat fish and play around. Dolphins believe that they are smarter for exactly
the same reasons."
-Douglas Adams, writer, dramatist, and musician (1952-2001)
From: vishal ladwa [mailto:[email protected]]
Sent: Wednesday, November 04, 2009 01:56
To: Skyles, Greg S; Kok, Auke-jan H
Cc: Arjan van de Ven; [email protected]
Subject: Re: [Moblin Dev] Ethernet is not coming up on Moblin (Congatec Board)
Hi,
Below is the output of lspci –nn command and there is not Ethernet controller
listed in the output!!!!!!
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH
Poulsbo) [8086:8100] (rev 07)
00:02.0 VGA compatible controller [0300]: Intel Corporation System Controller
Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07)
00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub (SCH
Poulsbo) HD Audio Controller [8086:811b] (rev 07)
00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 1 [8086:8110] (rev 07)
00:1c.1 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 2 [8086:8112] (rev 07)
00:1d.0 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #1 [8086:8114] (rev 07)
00:1d.1 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #2 [8086:8115] (rev 07)
00:1d.2 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #3 [8086:8116] (rev 07)
00:1d.7 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB EHCI #1 [8086:8117] (rev 07)
00:1e.0 SD Host controller [0805]: Intel Corporation System Controller Hub (SCH
Poulsbo) SDIO Controller #1 [8086:811c] (rev 07)
00:1e.1 SD Host controller [0805]: Intel Corporation System Controller Hub (SCH
Poulsbo) SDIO Controller #2 [8086:811d] (rev 07)
00:1e.2 SD Host controller [0805]: Intel Corporation System Controller Hub (SCH
Poulsbo) SDIO Controller #3 [8086:811e] (rev 07)
00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH
Poulsbo) LPC Bridge [8086:8119] (rev 07)
00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub (SCH
Poulsbo) IDE Controller [8086:811a] (rev 07)
01:00.0 Network controller [0280]: Intel Corporation Unknown device [8086:4232]
02:00.0 System peripheral [0880]: Xilinx Corporation Unknown device [10ee:a123]
And also I tried using Moblin IVI kernel (2.6.29.1-18.1.moblin2-ivi) as
somewhere while googling I read FPGA drivers are included in Moblin IVI
kernel. But the result remain same.
Thanks,
Vishal
--- On Mon, 11/2/09, Kok, Auke <[email protected]> wrote:
From: Kok, Auke <[email protected]>
Subject: Re: [Moblin Dev] Ethernet is not coming up on Moblin (Congatec Board)
To: "Skyles, Greg S" <[email protected]>
Cc: "Arjan van de Ven" <[email protected]>, "vishal ladwa"
<[email protected]>, "[email protected]" <[email protected]>
Date: Monday, November 2, 2009, 10:46 PM
can you send the output of:
lspci -nn
to this list?
datasheets are totally useless, manufacturers sometimes put completely different
devices in hardware ;)
Cheers,
Auke
Skyles, Greg S wrote:
> Datasheet on the Congatec web site says "Gigabit Ethernet Realtek RTL8111"...
>
> -Greg
>
> "What really interests me is whether God had any choice in the creation of
> the world."
> -Albert Einstein
>
> -----Original Message-----
> From:
> [email protected]<http://us.mc950.mail.yahoo.com/mc/[email protected]>
>
> [mailto:[email protected]<http://us.mc950.mail.yahoo.com/mc/[email protected]>]
> On Behalf Of Arjan van de Ven
> Sent: Monday, November 02, 2009 07:59
> To: vishal ladwa
> Cc:
> [email protected]<http://us.mc950.mail.yahoo.com/mc/[email protected]>
> Subject: Re: [Moblin Dev] Ethernet is not coming up on Moblin (Congatec Board)
>
> vishal ladwa wrote:
>> Hello
>>
>> I have installed Moblin alpha version on Congatec IVI starter-kit. But
>> Ethernet is not coming up.
>
>
> what ethernet chip is on this board??
>
> _______________________________________________
> Moblin dev Mailing List
> [email protected]<http://us.mc950.mail.yahoo.com/mc/[email protected]>
>
> To manage or unsubscribe from this mailing list visit:
> http://lists.moblin.org/listinfo/dev or your user account on
> http://moblin.org<http://moblin.org/> once logged in.
>
> For more information on the Moblin Developer Mailing lists visit:
> http://moblin.org/community/mailing-lists
> _______________________________________________
> Moblin dev Mailing List
> [email protected]<http://us.mc950.mail.yahoo.com/mc/[email protected]>
>
> To manage or unsubscribe from this mailing list visit:
> http://lists.moblin.org/listinfo/dev or your user account on
> http://moblin.org<http://moblin.org/> once logged in.
>
> For more information on the Moblin Developer Mailing lists visit:
> http://moblin.org/community/mailing-lists
_______________________________________________
Moblin dev Mailing List
[email protected]
To manage or unsubscribe from this mailing list visit:
http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org
once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
