On the Congatec board, the Ethernet is connected via the FPGA. There are
drivers for the FPGA in the IVI releases of Moblin (follow the process you got
when you got the board, Moblin IVI is in early release state). The drivers must
match the FPGA code version, so you will likely have to update your FPGA code
as well. Again, follow the process you got when you got the board.
-Brett
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Kok,
Auke
Sent: Wednesday, November 04, 2009 11:14 AM
To: Skyles, Greg S
Cc: [email protected]
Subject: Re: [Moblin Dev] Ethernet is not coming up on Moblin (Congatec Board)
Skyles, Greg S wrote:
> Well, it’s there, it’s just not recognized:
>
> 01:00.0 Network controller [0280]: Intel Corporation Unknown device
> [8086:4232]
>
> I don’t know enough about how the linux kernel does device recognition, but
> I’d guess that the kernel you booted with didn’t have the right driver in
> it…
8086:4232 is the wireless device[1]. this board apparently does not have an
ethernet device enabled or present
check the BIOS and see if ethernet is disabled. if there is no ethernet option
in
the BIOS, contact the board vendor for specifications whether the board actually
contains an ethernet device.
Auke
[1] see http://pci-ids.ucw.cz/read/PC/8086/4232
_______________________________________________
Moblin dev Mailing List
[email protected]
To manage or unsubscribe from this mailing list visit:
http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org
once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
_______________________________________________
Moblin dev Mailing List
[email protected]
To manage or unsubscribe from this mailing list visit:
http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org
once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
