I hope it works this time!
https://imgur.com/ZsqnidG
Cheers,
Lichun
2018-03-29 19:39 GMT+08:00 Michał Narajowski <michal.narajow...@codecoup.pl>
:
> Hi Li-Chun,
>
> We still didn't get the picture. Please try using some hosting website
> like Imgur and send us the link to the picture.
>
> Best regards
> Michał Narajowski
>
> 2018-03-29 13:20 GMT+02:00 Li-Chun Ko <littleb...@gmail.com>:
> > Attached it again here.
> >
> > Łukasz Rymanowski <lukasz.rymanow...@codecoup.pl> 於 2018年3月29日 週四
> 下午6:33 寫道：
> >>
> >> Hi Lichun
> >>
> >> On 29 March 2018 at 12:28, Li-Chun Ko <littleb...@gmail.com> wrote:
> >> > Hi Łukasz,
> >> >
> >> > I am using the ADV bearer.
> >> >
> >> > I don't have the log at hand but you should get all the information
> from
> >> > the picture I attached in my previous email. It was captured by a low
> >> > cost
> >> > Nordic sniffer.
> >>
> >> Could you resend picture you mentioned? It looks like it is missing in
> >> your first email (at least I did not get it)
> >>
> >> >
> >> > I used bascally the same steps that were mentioned in the BLE mesh
> >> > tutroial
> >> > except I changed the UUID and I also built the bootloader at the same
> >> > time
> >> > (I don't know why without compiling the bootloader the serial
> interface
> >> > of
> >> > the mesh node doesn't seem to work; I haven't got a chance to take a
> >> > further look so now I always compile them together).
> >> > Below are the detailed steps. I will share the configuration with you
> >> > once
> >> > I can reach my computer.
> >> >
> >> > Cheers,
> >> > Lichun
> >> > __
> >> > newt new my_mesh
> >> > cd my_mesh/
> >> > newt install -v
> >> > newt target create blemesh
> >> > newt target set blemesh app=@apache-mynewt-core/apps/blemesh
> >> > newt target set blemesh bsp=@apache-mynewt-core/hw/bsp/nrf52dk
> >> > newt target set blemesh build_profile=optimized
> >> > newt target set blemesh syscfg=BLE_MESH_PB_GATT=1:BLE_
> >> > MESH_DEV_UUID='(uint8_t[16]){0x33, 0x19, 0}'
> >> > newt target create nrf52_boot
> >> > newt target set nrf52_boot app=@apache-mynewt-core/apps/boot
> >> > newt target set nrf52_boot bsp=@apache-mynewt-core/hw/bsp/nrf52dk
> >> > newt target set nrf52_boot build_profile=optimized
> >> > newt build nrf52_boot
> >> > newt build blemesh
> >> > newt create-image blemesh 1.0.0
> >> > newt load blemesh
> >> >
> >> > Łukasz Rymanowski <lukasz.rymanow...@codecoup.pl> 於 2018年3月29日 週四
> 下午5:02
> >> > 寫道：
> >> >
> >> >> Hi Lichun,
> >> >>
> >> >> On 29 March 2018 at 10:42, Li-Chun Ko <littleb...@gmail.com> wrote:
> >> >> > Hi all,
> >> >> >
> >> >> > I am running blemesh with mynewt 1.3.0 on Nordics pca 10040. Here
> >> >> > are
> >> >> two
> >> >> > questions I have:
> >> >> >
> >> >> > 1. Is it correct that the current mynewt release doesn't support
> the
> >> >> > Provisioner's role? I wasn't able to find a way to do so.
> >> >> >
> >> >>
> >> >> This is correct. Provisioner is not supported in Mynewt. However if
> >> >> you want to test mesh wit two Mynewt devices, I suggest to use
> >> >> blemesh_shell application which gives you a way to hardcode mesh
> >> >> credentians by using "provision" command.
> >> >>
> >> >> > 2. I tried to use the mesh stack from Noridc to play the
> >> >> > Provisioner's
> >> >> role
> >> >> > but it seems the device cannot decode the unprovisioning beacon
> >> >> generated by
> >> >> > mynewt's mesh stack correctly. I captured the beacon with wireshark
> >> >> > 2.5.1
> >> >> > and noticed that the tool cannot parse the beacon correctly either.
> >> >> > The
> >> >> > AdvData can be recognized as mesh beacon but the content is showed
> as
> >> >> > "unknown data". I am thinking there might be some PDU format issues
> >> >> > (I
> >> >> > suspect the length field of the mesh beacon which is 24 bytes is
> >> >> incorrect)
> >> >> > but I am not sure. I have attached a photo as the reference and
> >> >> > hopefully
> >> >> > someone can help check.
> >> >> >
> >> >>
> >> >> That is interesting. I did not test against Nordic stack but was
> >> >> testing against PTS tool and some other implementation and have not
> >> >> seen such issue.
> >> >> Could you share your target configuration ("newt target show <target
> >> >> name>") and wireshark logs?
> >> >>
> >> >> BTW What bearer uses Nordic stack?
> >> >>
> >> >> > Br,
> >> >> > Lichun
> >> >>
> >> >> Thanks
> >> >> Łukasz
> >> >>
> >>
> >>
> >> Best
> >> Łukasz
>
