Uwe,
I had a chance to get into JanusGraph w/ Gremlin Server today. Any thoughts
on how you would integrate that? I have some inchoate thoughts about how to
build some sort of Avro-based reader setup so you can do strongly typed
associations sorta like this:
{
"from": {
"type": "PersonRecord",
"value": { ....}
},
"to": {
"type": "PersonRecord",
"value": { ....}
},
"direction": "out",
"edgeLabel": "emailed"
}
We could mix that with the schema registry APIs to generate Gremlin syntax
to send to the Gremlin server.
First time I've done this, so please (Matt too) let me know what you think.
Thanks,
Mike
On Sun, Oct 14, 2018 at 6:07 AM Mike Thomsen <mikerthom...@gmail.com> wrote:
> We have a Neo4J processor in a PR, but it is very much tied to Neo4J and
> Cypher. I was raising the issue that we might want to take that PR and
> extend it into an "ExecuteCypherQuery" processor with controller services
> that use either cypher for gremlin or the neo4j driver.
>
> On Sun, Oct 14, 2018 at 6:03 AM u...@moosheimer.com <u...@moosheimer.com>
> wrote:
>
>> Mike,
>>
>> Cypher for Gremlin is a good idea. We can start with it and then later
>> allow an alternative so that users can use either Cypher or Gremlin
>> directly.
>>
>> To set the focus on Neo4J or Janusgraph or xyz is in my opinion not
>> target-oriented.
>> We should have a NiFi Graph processor that supports Tinkerpop. Via the
>> Gremlin server we can support all Tinkerpop capable graph databases
>> (
>> https://github.com/apache/tinkerpop/blob/master/gremlin-server/conf/gremlin-server-neo4j.yaml
>> ).
>>
>> Via a controller service we can then connect either Neo4J or Janusgraph
>> or any other graph DB.
>> Otherwise we would have to build a processor for each Graph DB.
>> We don't do that in NiFi for RDBMS either. There we have an ExecuteSQL
>> or PutSQL and say about the controller service what we want to connect.
>>
>> What do you mean Mike?
>>
>> Best Regards,
>> Uwe
>>
>> Am 06.10.2018 um 00:15 schrieb Mike Thomsen:
>> > Uwe and Matt,
>> >
>> > Now that we're dipping our toes into Neo4J and Cypher, any thoughts on
>> this?
>> >
>> > https://github.com/opencypher/cypher-for-gremlin
>> >
>> > I'm wondering if we shouldn't work with mans2singh to take the Neo4J
>> work
>> > and push it further into having a client API that can let us inject a
>> > service that uses that or one that uses Neo4J's drivers.
>> >
>> > Mike
>> >
>> > On Mon, May 14, 2018 at 7:13 AM Otto Fowler <ottobackwa...@gmail.com>
>> wrote:
>> >
>> >> The wiki discussion should list these and other points of concern and
>> >> should document the extent to which
>> >> they are to be addressed.
>> >>
>> >>
>> >> On May 12, 2018 at 12:37:59, u...@moosheimer.com (u...@moosheimer.com)
>> >> wrote:
>> >>
>> >> Matt,
>> >>
>> >> You have some interesting ideas that I really like.
>> >> GraphReaders and GraphWriters would be interesting. When I started
>> >> writing a graph processor with my idea, the concept was not yet
>> >> implemented in NiFi.
>> >> I don't find GraphML and GraphSON so tingly because they contain e.g.
>> >> the Vertex/Edge IDs and serve as import and export format to my
>> >> knowledge (correct me if I'm wrong).
>> >>
>> >> A ConvertRecordToGraph processor is a good approach, the only question
>> >> is from which format we can convert?
>> >>
>> >> I also think to make a graph processor a bit general we would have to
>> >> provide a query as input which provides the correct vertex from which
>> >> the graph should be extended.
>> >> Maybe like your suggestion with a gremlin query or a small gremlin
>> script.
>> >>
>> >> If a vertex is found a new edge and a new vertex are added.
>> >> It asks how we transmit the individual attributes to the edge and
>> vertex
>> >> as well as the labels of the edge and vertex? Possibly with NiFi
>> >> attributes?
>> >>
>> >> I have some headaches about the complexity.
>> >> A small example:
>> >> Imagine we have a set from a CSV file.
>> >> The columns are Set ID, Token1, Token2, Token3...
>> >> ID, Token1,Token2,Token3,Token4,Token5
>> >> 123, Mary, had, a, little, lamp
>> >>
>> >> I want to create a vertex with ID 123 (if not exists). Then I want to
>> >> check for each token if a vertex exists in the graph database (search
>> >> for vertex with label "Token" and attribute "name"="Mary"). If the
>> >> vertex does not exist, the vertex has to be created.
>> >> Since I want to save e.g. Wikipedia to my graph I want to avoid the
>> >> supernode problem for the token vertices. I create a few distribution
>> >> vertices for each vertex that belongs to a token. If there is a vertex
>> >> for Token1(Mary) then I don't want to make the edge from this vertex to
>> >> my vertex with the ID 123, but from one of the distribution vertices.
>> >> If the vertex for the token does not exist, the distribution vertices
>> >> have also to be created ... and so on...
>> >>
>> >> Even with this very simple example it seems to become difficult with a
>> >> universal processor.
>> >>
>> >> In any case I think the idea to implement a graph processor in NiFi is
>> a
>> >> good one.
>> >> The more we work on it the more good ideas we get and maybe only I
>> can't
>> >> see the forest for the trees.
>> >>
>> >> One question about Titan. To my knowledge, Titan has been dead for a
>> >> year and a half and Janusgraph is the successor?
>> >> Titan has become unofficially Datastax Enterprise Graph?!
>> >> Supporting Titan could become difficult because Titan does not support
>> >> my knowledge after TinkerPop 3 and is no longer maintained.
>> >>
>> >> I like your idea for a wiki page for more ideas. In the many mails one
>> >> loses oneself otherwise.
>> >>
>> >> Regards,
>> >> Kay-Uwe
>> >>
>> >> Am 12.05.2018 um 16:52 schrieb Matt Burgess:
>> >>> All,
>> >>>
>> >>> As Joe implied, I'm very happy that we are discussing graph tech in
>> >>> relation to NiFi! NiFi and Graph theory/tech/analytics are passions of
>> >>> mine. Mike, the examples you list are great, I would add Titan (and
>> >>> its fork Janusgraph as Kay-Uwe mentioned) and Azure CosmosDB (these
>> >>> and others are at [1]). I think there are at least four aspects to
>> >>> this:
>> >>>
>> >>> 1) Graph query/traversal: This deals with getting data out of a graph
>> >>> database and into flow file(s) for further processing. Here I agree
>> >>> with Kay-Uwe that we should consider Apache Tinkerpop as the main
>> >>> library for graph query/traversal, for a few reasons. The first as
>> >>> Kay-Uwe said is that there are many adapters for Tinkerpop (TP) to
>> >>> connect to various databases, from Mike's list I believe ArangoDB is
>> >>> the only one that does not yet have a TP adapter. The second is
>> >>> informed by the first, TP is a standard interface and graph traversal
>> >>> engine with a common DSL in Gremlin. A third is that Gremlin is a
>> >>> Groovy-based DSL, and Groovy syntax is fairly close to Java 8+ syntax
>> >>> and you can call Groovy/Gremlin from Java and vice versa. A third is
>> >>> that Tinkerpop is an Apache TLP with a very active and vibrant
>> >>> community, so we will be able to reap the benefits of all the graph
>> >>> goodness they develop moving forward. I think a QueryGraph processor
>> >>> could be appropriate, perhaps with a GraphDBConnectionPool controller
>> >>> service or something of the like. Apache DBCP can't do the pooling for
>> >>> us, but we could implement something similar to that for pooling TP
>> >>> connections.
>> >>>
>> >>> 2) Graph ingest: This one IMO is the long pole in the tent. Gremlin is
>> >>> a graph traversal language, and although its API has addVertex() and
>> >>> addEdge() methods and such, it seems like an inefficient solution,
>> >>> akin to using individual INSERTs in an RDBMS rather than a
>> >>> PreparedStatement or a bulk load. Keeping the analogy, bulk loading in
>> >>> RDBMSs is usually specific to that DB, and the same goes for graphs.
>> >>> The Titan-based ones have Titan-Hadoop (formerly Faunus), Neo4j has
>> >>> external tools (not sure if there's a Java API or not) and Cypher,
>> >>> OrientDB has an ETL pipeline system, etc. If we have a standard Graph
>> >>> concept, we could have controller services / writers that are
>> >>> system-specific (see aspect #4).
>> >>>
>> >>> 3) Arbitrary data -> Graph: Converting non-graph data into a graph
>> >>> almost always takes domain knowledge, which NiFi itself won't have and
>> >>> will thus have to be provided by the user. We'd need to make it as
>> >>> simple as possible but also as powerful and flexible as possible in
>> >>> order to get the most value. We can investigate how each of the
>> >>> systems in aspect #2 approaches this, and perhaps come up with a good
>> >>> user experience around it.
>> >>>
>> >>> 4) Organization and implementation: I think we should make sure to
>> >>> keep the capabilities very loosely coupled in terms of which
>> >>> modules/NARs/JARs provide which capabilities, to allow for maximum
>> >>> flexibility and ease of future development. I would prefer an
>> >>> API/libraries module akin to nifi-hadoop-libraries-nar, which would
>> >>> only include Apache Tinkerpop and any dependencies needed to do "pure"
>> >>> graph stuff, so probably no TP adapters except tinkergraph (and/or its
>> >>> faster fork from ShiftLeft [2]). The reason I say that is so NiFi
>> >>> components (and even the framework!) could use graphs in a lightweight
>> >>> manner, without lots of heavy and possibly unnecessary dependencies.
>> >>> Imagine being able to query your own flows using Gremlin or Cypher! I
>> >>> also envision an API much like the Record API in NiFi but for graphs,
>> >>> so we'd have GraphReaders and GraphWriters perhaps, they could convert
>> >>> from GraphML to GraphSON or Kryo for example, or in conjunction with a
>> >>> ConvertRecordToGraph processor, could be used to support the
>> >>> capability in aspect #3 above. I'd also be looking at bringing in
>> >>> Gremlin to the scripting processors, or having a Gremlin based
>> >>> scripting bundle as NiFi's graph capabilities mature.
>> >>>
>> >>> You might be able to tell I'm excited about this discussion ;) Should
>> >>> we get a Wiki page going for ideas, and/or keep it going here, or
>> >>> something else? I'm all ears for thoughts, questions, and ideas
>> >>> (especially the ones that might seem crazy!)
>> >>>
>> >>> Regards,
>> >>> Matt
>> >>>
>> >>> [1] http://tinkerpop.apache.org/providers.html
>> >>> [2] https://github.com/ShiftLeftSecurity/tinkergraph-gremlin
>> >>>
>> >>> On Sat, May 12, 2018 at 8:02 AM, u...@moosheimer.com <
>> u...@moosheimer.com>
>> >> wrote:
>> >>>> Hi Mike,
>> >>>>
>> >>>> graph database support is not quite as easy as it seems.
>> >>>> Unlike relational databases, graphs have not only defined vertices
>> and
>> >> edges (labeled vertices and edges), they are directed or not and might
>> have
>> >> attributes at the nodes and edges, too.
>> >>>> This makes it a bit confusing for a general interface.
>> >>>>
>> >>>> In general, a graph database should always be accessed via TinkerPop
>> 3
>> >> (or higher), since every professional graph database supports
>> TinkerPop.
>> >>>> TinkerPop is for graph databases what jdbc is for relational
>> databases.
>> >>>>
>> >>>> I tried to create a general NiFi processor for graph databases myself
>> >> and then quit.
>> >>>> Unlike relational databases, graph databases usually have many
>> >> dependencies.
>> >>>> You do not simply create a data set but search for a particular
>> vertex
>> >> (which may still have certain edges) and create further edges and
>> vertices
>> >> at that.
>> >>>> And the search for the correct node is usually context-related.
>> >>>>
>> >>>> This makes it difficult to do something general for all requirements.
>> >>>>
>> >>>> In any case I am looking forward to your concept and how you want to
>> >> solve it.
>> >>>> It's definitely a good idea but hard to solve.
>> >>>>
>> >>>> Btw.: You forgot the most important graph database - Janusgraph.
>> >>>>
>> >>>> Mit freundlichen Grüßen / best regards
>> >>>> Kay-Uwe Moosheimer
>> >>>>
>> >>>>> Am 12.05.2018 um 13:01 schrieb Mike Thomsen <mikerthom...@gmail.com
>> >:
>> >>>>>
>> >>>>> I was wondering if anyone on the dev list had given much thought to
>> >> graph
>> >>>>> database support in NiFi. There are a lot of graph databases out
>> there,
>> >> and
>> >>>>> many of them seem to be half-baked or barely supported. Narrowing it
>> >> down,
>> >>>>> it looks like the best candidates for a no fuss, decent sized graph
>> >> that we
>> >>>>> could build up with NiFi processors would be OrientDB, Neo4J and
>> >> ArangoDB.
>> >>>>> The first two are particularly attractive because they offer JDBC
>> >> drivers
>> >>>>> which opens the potential to making them even part of the standard
>> >>>>> JDBC-based processors.
>> >>>>>
>> >>>>> Anyone have any opinions or insights on this issue? I might have to
>> do
>> >>>>> OrientDB anyway, but if someone has a good feel for the market and
>> can
>> >> make
>> >>>>> recommendations that would be appreciated.
>> >>>>>
>> >>>>> Thanks,
>> >>>>>
>> >>>>> Mike
>>
>>
>>
