I don’t know if Microchip do NuttX (or other RTOS) porting work? I would assume not so would need support from the NuttX community.
My longer term plan is to work on USB support for Bluetooth dongles rather than dedicated module support as that – should – avoid the need for Bluetooth SIG accreditation and fees. Don’t quote me on that! From: "Alan C. Assis" <acas...@gmail.com> Reply to: "dev@nuttx.apache.org" <dev@nuttx.apache.org> Date: Thursday, 20 April 2023 at 20:08 To: "dev@nuttx.apache.org" <dev@nuttx.apache.org> Subject: Re: MCU/Board with WiFi, BT and USB Host Hi Tim, Really nice board! Do you know if Microchip is planing to port ATWILC3000-MR110UA WiFi/BLE chip to NuttX? Should be nice to have a companion to BCM43 at drivers/wireless/ieee80211/ BR, Alan On 4/20/23, Tim Hardisty <t...@hardisty.co.uk<mailto:t...@hardisty.co.uk>> wrote: What sort processing power? Memory? Peripherals? SAMA5D27 (not that I’m biased lol) perhaps? ATSAMA5D27-WLSOM1 eval board has what you need but might be over the top? USB host/device works and you can do OTG/DRP on a custom board and it should be more than capable of doing CDC-ACM I would have thought? From: Petro Karashchenko <petro.karashche...@gmail.com<mailto:petro.karashche...@gmail.com>> Reply to: "dev@nuttx.apache.org<mailto:dev@nuttx.apache.org>" <dev@nuttx.apache.org<mailto:dev@nuttx.apache.org>> Date: Thursday, 20 April 2023 at 14:25 To: "dev@nuttx.apache.org<mailto:dev@nuttx.apache.org>" <dev@nuttx.apache.org<mailto:dev@nuttx.apache.org>> Subject: MCU/Board with WiFi, BT and USB Host Hello, I'm looking for an MCU or better a development board that has WiFi, BT and USB host capabilities. Can anybody give me advice for that? I need to connect a CDC ACM device to that USB, so maybe there are some alternatives that can be used (there is a device that exposes its functionality via USB to serial), so I need to communicate with that from my device. If that MCU is supported by NuttX then it would be super fantastic! Best regards, Petro