Hi Alex For MX:RemoteObject : We have created an Example : https://github.com/alinakazi/Examples/tree/master/HelloWorld Our Welcome.mxml file in Example uses mx:RemoteObject this way :
<mx:RemoteObject id="roLogin" channelSet="{parentApplication.amfChannelSet}"
showBusyCursor="true"
destination="shmUserSetupBO_General" fault="fn_HandleFault(event);"
result="fn_roLoginRH(event);"/>
We have a remoting-config.xml file in Java\web\WEB-INF\conf
<destination id="shmUserSetupBO_General">
<properties>
<source>com.shm.BO.SEC.shmUserSetupBO_General</source>
</properties>
</destination>
Our Java Application contains a class : com.shm.BO.SEC.shmUserSetupBO_General
It contains a method :
public String f_sendMail (String aLoginName){............... return str; }
I am calling that method using remoteObject from Apache Royale Application.
roLogin.f_sendMail(loginName.text);
Will it work using functionality available in Apache Royale SDK or Do I have to
make changes in my front end Application (Royale) to work ?
Example is available here:
https://github.com/alinakazi/Examples/tree/master/HelloWorld
Thanks in Advance,
Alina kazi
-----Original Message-----
From: Alina Kazi [mailto:[email protected]]
Sent: Wednesday, November 07, 2018 10:49 AM
To: [email protected]
Subject: RE: Getting An Emulation Component To Run
Hi Alex,
Mx:ModuleLoader is compiled successfully now I can see mx:Module on output
screen.
Now I will work on remote object.
-Thanks,
Alina Kazi
-----Original Message-----
From: Alex Harui [mailto:[email protected]]
Sent: Tuesday, November 06, 2018 10:38 AM
To: [email protected]
Subject: Re: Getting An Emulation Component To Run
Hi Alina,
I cannot work with .RAR files. Plus dropbox won't display MXML files.
Examples/mxroyale/tourdeflexmodules is using mx:ModuleLoader. It is better to
compare what it is doing instead of what Basic UIModuleLoader is doing.
Thanks,
-Alex
On 11/5/18, 4:16 AM, "Alina Kazi" <[email protected]> wrote:
Hi Alex,
You have created an Example in royale/ModuleExample
Contains two files in different projects : MainApp.mxml and Module.mxml
MainApp uses UIModuleLoader and it loads the modules with moduleName &
modulePath properties.
UIModuleLoader extends UIBase
In MXRoyale, ModuleLoader extends VBox extends Box extends Container
extends UIComponent extends UIBase
UIModule extends Group extends GroupBase extends UIBase
In MXRoyale, Module extends Container extends UIComponent extends UIBase
We have compare all files , functionality is copied from Basic -> MXRoyale
, default.css is also copied.
We have checked default.css for Basic's Group, GroupBase
We have checked default.css for MXRoyale's Container
Still my Example do not compile for MX Module before and after changes.
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.dropbox.com%2Fs%2Ftxbccb5ofblmnr9%2FModuleExampleMX.rar%3Fdl%3D0&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999270941&sdata=FwC038v2mIDz2Uvj0yWGzNejIuDOSiNH9sHyyY6AVxg%3D&reserved=0
We are using url = "modules/Module.swf" instead of modulePath = "modules"
and moduleName = "Module"
We have seen functionality again and again after comparison we have copied
missing src from Basic -> MXRoyale
Please compile this example with output for us or Guide us.
Thanks in Advance,
Alina Kazi
-----Original Message-----
From: Alina Kazi [mailto:[email protected]]
Sent: Thursday, November 01, 2018 10:07 AM
To: [email protected]
Subject: RE: Getting An Emulation Component To Run
Hi Alex,
When I tried after mapping BorderContainer to MX Container with the
lookupOnly="true" in the spark-royale-manifest.xml, It worked for me.
Thanks,
Alina
-----Original Message-----
From: Alex Harui [mailto:[email protected]]
Sent: Tuesday, October 30, 2018 9:48 PM
To: [email protected]
Subject: Re: Getting An Emulation Component To Run
I think you can ignore that error unless you see other errors in the
browser console related to it.
Did you check the browser console for errors when it came up blank? Or
step into the code to see whether the new code is being called? And compare to
how MX Container works? These are strategies and skills that will be helpful
as a developer.
If your code doesn't require that BorderContainer is a SkinnableContainer,
you could try mapping BorderContainer to MX Container with the lookup-"true" in
the spark-royale-manifest.xml
-Alex
On 10/30/18, 4:52 AM, "Alina Kazi" <[email protected]> wrote:
Hi Alex,
1. You may have to copy other CSS from MX Container's or Spark Group's
base classes and put all of it in the BorderContainer selector.
MX Container extends UIComponent , So I copied only MX Container's CSS
in BorderContainer selector.
2. It would have been more helpful to see what you had put in the
defaults.css file, and also, since the compile was successful
What I have copied in default.css:
BorderContainer
{
IBeadView:
ClassReference("org.apache.royale.html.beads.ContainerView");
IBeadLayout:
ClassReference("org.apache.royale.html.beads.layouts.BasicLayout");
IViewport:
ClassReference("org.apache.royale.html.supportClasses.ScrollingViewport");
IViewportModel:
ClassReference("org.apache.royale.html.beads.models.ViewportModel");
}
In @media -royale-swf
BorderContainer
{
IBackgroundBead:
ClassReference("org.apache.royale.html.beads.SolidBackgroundBead");
IBorderBead:
ClassReference("org.apache.royale.html.beads.SingleLineBorderBead");
IContentView:
ClassReference("org.apache.royale.html.supportClasses.ContainerContentArea");
}
3. I think you will need to copy code from MX Container into
SkinnableContainer, especially the MXMLDataInterpreter code.
Now, I have copy code from MX Container into SkinnableContainer,
MXMLDataInterpreter code and copied other code step by step that was related to
Bead.
Output is blank as before, following are the links shared earlier :
While compiling the ControlsExample
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FppOz&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999270941&sdata=PbPkfCOdDZm1T1YkablUxjceytSXd0n0g3ax7kDyDXQ%3D&reserved=0
Output has 1 Error & 1 warning and Build Successfully, console is :
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2F5YMM&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999270941&sdata=EFIN%2FaCR6cJB8o%2FrGOgv6%2FX5XG4nKEv5P%2BOT1B53S9s%3D&reserved=0
Thanks in Advance,
Alina Kazi
-----Original Message-----
From: Alex Harui [mailto:[email protected]]
Sent: Tuesday, October 30, 2018 1:54 PM
To: [email protected]
Subject: Re: Getting An Emulation Component To Run
Hi Alina,
You may have to copy other CSS from MX Container's or Spark Group's
base classes and put all of it in the BorderContainer selector.
If all rules are royale-specific, like IBeadModel, then they won't be
listed in the output css but should be in the main .JS file.
It would have been more helpful to see what you had put in the
defaults.css file, and also, since the compile was successful, whether there
were any errors at run time.
I looked briefly at BorderContainer and SkinnableContainer. I think
you will need to copy code from MX Container into SkinnableContainer,
especially the MXMLDataInterpreter code
I have to stop working for tonight.
HTH,
-Alex
On 10/30/18, 12:54 AM, "Alina Kazi" <[email protected]> wrote:
Hi Alex,
1. I would think that BorderContainer could use the same beads as
MX Container, or even Spark Group.
I have tried both MX Container / Spark Group Beads
Case(A) I have copied MX Container from file (defaults.css in
MXRoyale/src/main/resource) to (defaults.css in SparkRoyale/src/main/resource)
renamed Container to BorderContainer in (defaults.css in
SparkRoyale/src/main/resource).
Case(B) I have copied Spark GroupBase from file (defaults.css
in SparkRoyale /src/main/resource) to (defaults.css in
SparkRoyale/src/main/resource) renamed copied word GroupBase to BorderContainer
in (defaults.css in SparkRoyale/src/main/resource).
2. Not having BorderContainer in the output CSS is unexpected if
you are using it in the MXML
In Both Cases A and B the output default.css file for
ControlsExample contains
.BorderContainer {
}
In Both Cases A and B output default.css file for SparkRoyale.swc
contains
Whatever I copied to (defaults.css in
SparkRoyale/src/main/resource) for BorderContainer.
3. that you are using the same namespace prefix as other components
that are working
Yes I am using same namespace prefix as other components that are
working
[1] ControlsExample File :
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FppOz&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999280946&sdata=zVrzXVGnd1%2FyHTRYibeByWChrlgO2CEpzPeSOy8RSlo%3D&reserved=0
[2] SparkRoyale.swc console output :
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FrsqI&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999280946&sdata=GiUGZ%2BtQQWMrevZkc0EVmhU6mUkCO%2FvVrG7IwOsyGDc%3D&reserved=0
( Case B :When GroupBase default.css is copied for BorderContainer)
[3] ControlsExample console output :
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FXY7o&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999280946&sdata=dmilOA%2BmDYtKbh9wYu3jYiwK9HqEY8l2XboYLktj8sQ%3D&reserved=0
( Case B :When GroupBase default.css is copied for BorderContainer)
[4] SparkRoyale.swc console output :
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2Fsm8M&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999280946&sdata=Q7%2Bd39c9fC0l79lORzaeKVGDbJLCmvK7hs2KjCQ%2Fjrw%3D&reserved=0
( Case A :When Container default.css is copied for BorderContainer)
[5] ControlsExample console output :
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2F5YMM&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999280946&sdata=h24BzzkAeswpbl6er%2FYavvOvtPzANrCSrAvVkULlmYo%3D&reserved=0
( Case A :When Container default.css is copied for BorderContainer)
Yes the output from compiling the SparkRoyale SWC does not contain
any warnings about BorderContainer, and the SWC builds successfully and is
being copied into the right places
I have checked by unzipping the SWC and checked the defaults.css
and JS files
Thanks,
Alina Kazi
-----Original Message-----
From: Alex Harui [mailto:[email protected]]
Sent: Monday, October 29, 2018 9:14 PM
To: [email protected]
Subject: Re: Getting An Emulation Component To Run
Hi Alina,
Again, it is important to be efficient in communication. Just
telling me the ModuleLoader does not load a module does not let me help you.
You should try to remember past emails we had and report on what you tried from
those past emails. For example, do you get any warnings or errors in the
console? Did you verify that the files are where they should be? Did you step
through how TourDeFlexModules loads a module and compare to your application?
For BorderContainer, and really, any UI widget in the Royale
emulation components, an important thing to understand is that they are, so
far, all based on UIBase, since UIComponent extends UIBase and all UI widgets
extend UIComponent. That means that the CSS must load model and view beads and
often controller and/or layout and other beads. So first thing is to
understand by examining source and output whether there are such beads for
BorderContainer. I would think that BorderContainer could use the same beads
as MX Container, or even Spark Group.
I don't think we've implemented spark skins in SparkRoyale yet, so
any skinClass is going to get ignored right now.
Not having BorderContainer in the output CSS is unexpected if you
are using it in the MXML. So I would double check that you have added
BorderContainer to the correct CSS file (defaults.css in
SparkRoyale/src/main/resource) and that you are using the same namespace prefix
as other components that are working, and that the output from compiling the
SparkRoyale SWC does not contain any warnings about BorderContainer, and the
SWC builds successfully and is being copied into the right places. SWC files
are really ZIP files so you can always unzip the SWC and examine the
defaults.css and JS files.
HTH,
-Alex
On 10/29/18, 4:11 AM, "Alina Kazi" <[email protected]> wrote:
Hi Alex,
Please answer for the following issues :
1. Issue (MX ModuleLoader) :
We need similar working as in TourdeFlexModules Example :
D:\apache-royale-0.9.3-bin-js-swf\royale-asjs\examples\mxroyale\tourdeflexmodules\src\spark\components\VideoPlayerModuleLoader.mxml
ModuleLoader url property does not load Module.
2. Issue (Spark BorderContainer) :
If we use s:BorderContainer all controls inside Spark
BorderContainer are not shown in output.
How it will be shown in output. Do I need to add something in
default.css for BorderContainer
We have added
BorderContainer
{
backgroundColor: #FFFFFF;
borderStyle : "solid";
cornerRadius: 0;
skinClass:
ClassReference("spark.skins.spark.BorderContainerSkin");
} in SparkRoyale default.css but still output is empty.
All other files applications.mxml and shmApplication.as are
same as before
[1] AppView_ERP.mxml
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FY2ne&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999280946&sdata=OHdSxXNmmbSoXpUlHI0USOIaVbWtyVHHUihHOTgybJw%3D&reserved=0
Thanks,
Alina Kazi
-----Original Message-----
From: Alina Kazi [mailto:[email protected]]
Sent: Monday, October 29, 2018 12:03 PM
To: [email protected]
Subject: RE: Getting An Emulation Component To Run
Thanks a lot Alex. It works.
-Alina
-----Original Message-----
From: Alex Harui [mailto:[email protected]]
Sent: Monday, October 29, 2018 12:03 PM
To: [email protected]
Subject: Re: Getting An Emulation Component To Run
Hi Alina,
Add the following metadata to your shmApplication.as It should
go before the "public class". Check mx.core.Application to see how it is
placed in that file.
[Frame(factoryClass="mx.managers.SystemManager")]
This should result in an
applications_mx_managers_SystemManager.js file in the bin/js-debug folder, and
the index.html should try to instantiate that file which should then launch
everything else.
HTH,
-Alex
On 10/28/18, 11:54 PM, "Alina Kazi" <[email protected]> wrote:
Hi Alex,
Files in the bin/js-debug folder
Files :
AppView_ERP.js
applications.css
applications.js
index.html
Namespace.js
QName.js
shmApplication.js
XML.js
XMLList.js
Folders :
library
mx
org
Thanks,
Alina Kazi
-----Original Message-----
From: Alex Harui [mailto:[email protected]]
Sent: Monday, October 29, 2018 11:48 AM
To: [email protected]
Subject: Re: Getting An Emulation Component To Run
Hi Alina,
When you use shmApplication, what files end up in the
bin/js-debug folder (the subfolders don't matter right now).
Thanks,
-Alex
On 10/28/18, 11:40 PM, "Alina Kazi" <[email protected]>
wrote:
Hi Alex,
Yes, I am running the js-debug version. If I do similar
working in mx:Application tag it works but when I do it with custom
shmApplication control that extends mx.core.Application it does not show
anything in output.
My file applications.mxml starts with tag
<cc:shmApplication>
And shmApplication.as extends mx.core.Application. I am
adding namespace xmlns:cc="*"
[1] applications.mxml
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FOpDT&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999280946&sdata=eQtufZ0nzd2iepnZ09p8WItiZI0dcSZIWpyrM1f%2F76M%3D&reserved=0
[2] shmApplication.as
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FPz6p&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999280946&sdata=or99%2F%2F9TME5LbjJ7n0uWQUF22ksVWpuBSFFCMrUkG9U%3D&reserved=0
[3] AppView_ERP.mxml
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FRLcA&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999280946&sdata=71g3utug8iFq40xa4%2BXJuOoCD0gC%2BDxbXkFQBsizB28%3D&reserved=0
All files are placed on same path.
When I replace applications.mxml opening and closing
tag <cc:shmApplication> tag to <mx:Application>
It shows both Button and Label in output. But I need to
use shmApplication.
Again these are not my actual source files . It's just
a scenario we need . So, I create a separate example for that.
Thanks,
Alina Kazi
-----Original Message-----
From: Alex Harui [mailto:[email protected]]
Sent: Monday, October 29, 2018 11:02 AM
To: [email protected]
Subject: Re: Getting An Emulation Component To Run
Hi Alina,
Are you running the version in js-debug? It should
show something in the console. Also look at the DOM tree and see what HTML
elements have been created, if any.
-Alex
On 10/28/18, 10:28 PM, "Alina Kazi"
<[email protected]> wrote:
Hi Piotr,
Application is compiled Successfully but nothing
shows in output in the Web Browser Console when running my application.
Thanks,
Alina
-----Original Message-----
From: Piotr Zarzycki
[mailto:[email protected]]
Sent: Friday, October 26, 2018 7:09 PM
To: [email protected]
Subject: Re: Getting An Emulation Component To Run
Hi Alina,
Just to help a bit with all of that. Do you see any
output in the Web
Browser Console when you running your application ?
If yes provide it here.
Thanks,
Piotr
pt., 26 paź 2018 o 14:42 Alina Kazi
<[email protected]> napisał(a):
> Hi Alex,
> We have 3 files in our Project
> Files Path is :
> [1]Project -> applications.mxml (main file)
> [2]Project ->shmApplication.as extends
mx.core.Application
> [3]Project-> AppView_ERP.mxml
>
> As MX ViewStack , Canvas are working controls.
>
> AppView_ERP.mxml has initial tag mx:Canvas
>
> applications.mxml has initial tag
cc:shmApplication and
> We have method in applications.mxml
> private function
fn_roBasicConfRH(e:ResultEvent):void
> {
> var
appViewStack:ViewStack = new
> ViewStack();
>
>
appViewStack.percentWidth = 100;
>
appViewStack.percentHeight = 100;
>
this.addElement(appViewStack);
>
> var
compERPView:Canvas = new AppView_ERP()
> as Canvas;
>
> compERPView.id =
"appView_ERP";
> appView =
compERPView;
>
appViewStack.addElement(compERPView);
>
> mx.external.ExternalInterface.call("function
> setWinStatus(){window.status='" +
iniFileParams.CompanyName + "';}");
>
> }
> Application is compiled Successfully but nothing
shows in output.
> If you need more details. I can create an example
Project.
>
> Thanks in Advance,
> Alina Kazi
>
> -----Original Message-----
> From: Alina Kazi [mailto:[email protected]]
> Sent: Friday, October 26, 2018 3:35 PM
> To: [email protected]
> Subject: RE: Getting An Emulation Component To Run
>
> Hi Alex,
>
> We have replaced import
spark.components.Application with import
> mx.core.Application in our whole Application.
After this change we are
> still able to compile our Application
successfully.
> Are you using SWFLoader to load other
applications? Again, your API
> Report did not mention this.
> We are not using SWFLoader anywhere in our
Application. We are using
> ModuleLoader only.
> What do you mean by needing Spark Application
many times?
> Sorry, import spark.components.Application is
written multiple times in
> src code but used once.
>
> That means now we don't need Spark Application.
> Thanks for Helping us.
>
> -Alina Kazi
>
> -----Original Message-----
> From: Alex Harui [mailto:[email protected]]
> Sent: Friday, October 26, 2018 12:45 PM
> To: [email protected]
> Subject: Re: Getting An Emulation Component To Run
>
> Hi Alina,
>
> Where did you use mx:Application in your
application? Somehow it got into
> the report.
>
> What do you mean by needing Spark Application
many times? Are you using
> SWFLoader to load other applications? Again,
your API Report did not
> mention this.
>
> Getting Application to work can be significant
amount of work as it has a
> lot of things to do. One approach you could take
is to step through your
> example with mx:Application and compare it to the
Spark Application and
> make changes to the Spark Application until it
works, but I'm concerned
> that you can't always copy code from
mx:Application.
>
> If you want to take on a big challenge like
getting Appilcation to work
> that is fine, but I guess I can delay my work on
Charts and get Spark
> Application to work. Let me know what you
decide. But I am very concerned
> about the accuracy of the data you have provided.
I'm wondering what else
> you are using that we don't know about.
>
> I'm done for today. I will see what you decide
in my morning.
>
> -Alex
>
> On 10/26/18, 12:22 AM, "Alina Kazi"
<[email protected]> wrote:
>
> Hi Alex ,
> I am using skinClass 2 times overall in my
Application. I can skip
> that if it takes a lot of time.
> I don't know How API report skip some API's.
> We need SparkApplication at many places in
our Application.
> If you can explain more in [1] , we want to
also participate in
> getting emulation component to run.
>
> Like Spark TextInput is now working as MX
TextInput, We have copied
> some source from MX TextInput to Spark TextInput
after reading [1] and it
> worked.
>
> [1]
>
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fwiki%2FEmulation-Components%23getting-an-emulation-component-to-run&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999280946&sdata=8kcPT8ZhnvwGC9dnJjipCpC8rYthLbBV1Un93kD5XzY%3D&reserved=0
>
> Thanks in Advance,
> Alina Kazi
>
> -----Original Message-----
> From: Alex Harui
[mailto:[email protected]]
> Sent: Friday, October 26, 2018 11:50 AM
> To: [email protected]
> Subject: Re: Getting An Emulation Component
To Run
>
> Hi Alina,
>
> In your API report, only mx.core.Application
was referenced. I don't
> understand why Spark Application was not
referenced, yet you are using it
> now. We have not spent any time getting Spark
Application to run. If
> that's really what you need, I would start
copying code from
> mx.core.Application. if you don't have custom
skins for Application, you
> can probably skip the skinning-related code.
>
> Good luck,
> -Alex
>
> On 10/25/18, 11:10 PM, "Alina Kazi"
<[email protected]> wrote:
>
> Hi ,
>
> We are able to compile our Application
and Library Projects
> successfully. Application Launch file uses a file
that extends Spark
> Application.as file. This Spark Application.as
file is present in Apache
> Royale SDK repo and has been emulated. But when
we run the application, No
> visual output is shown in index.html (i.e output
file)
>
> Spark Application extends
SkinnableContainer in Flex SDK
> default.css for SkinnableContainer is:
> SkinnableContainer
> {
> skinClass:
>
ClassReference("spark.skins.spark.SkinnableContainerSkin");
> }
>
>
> In Flex mx:Application extends
LayoutContainer extends Container
> in Flex SDK default.css for Container is
>
> Container
> {
> borderSkin:
>
ClassReference("mx.skins.spark.ContainerBorderSkin");
> borderStyle: "none";
> cornerRadius: 0;
> }
>
> You have added in MXRoyale default.css
>
> Container
> {
> IBeadView:
>
ClassReference("org.apache.royale.html.beads.ContainerView");
> IBeadLayout:
>
ClassReference("org.apache.royale.html.beads.layouts.BasicLayout");
> IViewport:
>
ClassReference("org.apache.royale.html.supportClasses.ScrollingViewport");
> IViewportModel:
>
ClassReference("org.apache.royale.html.beads.models.ViewportModel");
> }
>
> And mx:Application shows output.
>
> For Example :
>
> [1] Nothing in Output
> <s:Application xmlns:fx="
>
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fns.adobe.com%2Fmxml%2F2009&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999290960&sdata=MKP51sGDrTIYFArUTYRgH6FuIdCRoOCIPjpVR64XJDc%3D&reserved=0";
>
>
> xmlns:s="library://ns.apache.org/royale/spark"
>
> xmlns:mx="library://ns.apache.org/royale/mx"
height = "100%" width =
> "100%"
>
>
> <s:Button
x="30" y="30"
> id="searchBtn" label="Search"/>
>
> </s:Application>
>
> [2] It shows Button in output file
> <mx:Application xmlns:fx="
>
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fns.adobe.com%2Fmxml%2F2009&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999290960&sdata=MKP51sGDrTIYFArUTYRgH6FuIdCRoOCIPjpVR64XJDc%3D&reserved=0";
>
>
> xmlns:s="library://ns.apache.org/royale/spark"
>
> xmlns:mx="library://ns.apache.org/royale/mx"
height = "100%" width =
> "100%"
>
>
> <s:Button
x="30" y="30"
> id="searchBtn" label="Search"/>
>
> </mx:Application>
>
> How can I get Spark Application working
as MX Application ?
>
> Thanks,
> Alina
>
>
> -----Original Message-----
> From: Alex Harui
[mailto:[email protected]]
> Sent: Monday, October 22, 2018 10:04 PM
> To: [email protected]
> Subject: Re: Getting An Emulation
Component To Run
>
> Hi Alina,
>
> Again, I cannot help you as efficiently
if you do not provide
> important details.
>
> You are showing some part of the console
for building the
> application. But did the compiler hang, or did
it think it finished? What
> does your build.xml look like? What was the full
console output? I would
> want to see what command you typed and all output
up to and including the
> command prompt after it finished. As I mentioned
in prior emails, use
> paste.apache.org if necessary for large
quantities of console output.
>
> From the one line you pasted below, it
implied the build did not
> finish, yet you are saying that you tried to run
it and nothing showed up.
> Why would you try to run it if the build did not
finish? If the build did
> finish, did you get the expected output files?
If the build did not
> finish, try stripping down what is in the Module
until it works, or compare
> the build.xml settings against
examples/mxroyale/tourdeflexmodules.
>
> There are so many ways things can go
wrong, especially when
> developing new code. You must learn how to work
efficiently in these
> conditions.
>
> Another technique is to compare working
against non-working.
> Examples/mxroyale/tourdeflexmodules is able to
compile and load modules.
> You can set breakpoints in the tourdeflexmodules
code and follow how it
> works and set breakpoints in similar places in
your code and follow how it
> works and compares.
>
> Thanks,
> -Alex
>
> On 10/22/18, 1:12 AM, "Alina Kazi"
<[email protected]> wrote:
>
> Hi Alex,
>
> This time I told you about folders
hierarchy its same as
> examples/royale/ModuleExample.
> js:UIModuleLoader is replaced with
mx:ModuleLoader url
> property is added in ModuleLoader and extra
properties are removed,
> js:UIModule is replaced with mx:Module
> js:Application is replaced with
mx:Application
> namespace is replaced with mx
namespace
>
> Console output stopped at :
> [mxmlc] 109142 bytes written to
>
D:\apache-royale-0.9.3-bin-js-swf\royale-asjs\examples\royale\ModuleExample\Module\bin-debug\Module.swf
> in 3.220 seconds
>
> How else I can explain it in a better
way.
> Simply I just want same working like
> examples/royale/ModuleExample with Mx Controls.
> I am not using TitleWindow in my
current example.
>
>
> Thanks,
> Alina Kazi
>
>
> -----Original Message-----
> From: Alex Harui
[mailto:[email protected]]
> Sent: Monday, October 22, 2018 12:40
PM
> To: [email protected]
> Subject: Re: Getting An Emulation
Component To Run
>
> Hi Alina,
>
> Again, half a world away, I cannot
know what your folder
> structure and build files look like, or what you
tried or didn't try. And
> now, I have to stop working and we missed an
opportunity to help you
> because the important information was not
provided in your earlier email.
> I wrote some techniques in this email:
>
>
>
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.apache.org%2Fthread.html%2Fe6f3aa4010dca8c9bdbe2828a89295039d05d23806a5fe03ae18dbe4%40%253Cdev.royale.apache.org%253E&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999290960&sdata=2i2XAQViO%2BSHv15rhcuZKTTvjK6kwNjC40%2FhwCLh%2FSk%3D&reserved=0
>
> In your next email, I expect you see
evidence that you have
> understood and tried the techniques in the email
I linked. You will be
> expected to provide console output or information
about the tree of
> elements. And this might be a good opportunity
for you to try the debugger
> and set breakpoints in various places. Even if
you don't actually solve
> the problem you are facing, you are going to have
to become an expert in
> debugging JavaScript output from the Royale
Compiler.
>
> Please reserve the time to write a
really good email with the
> important information and questions. It will
save all of us time.
>
> Thanks,
> -Alex
>
> On 10/21/18, 11:39 PM, "Alex Harui"
<[email protected]> wrote:
>
> Hi Alina,
>
> The key piece for modules is
getting the output in the
> right place. Flex/Flash has some interesting
rules around how URLs got
> loaded. I haven't found a practical way to
replicate that in the Browser,
> so for now, it is up to you to put the output
where you are telling
> ModuleLoader to load it.
>
> If you look at the Ant build.xml
for royale/ModuleExample,
> the Module/build.xml assumes the MainApp has been
built first and copies
> its output files into the MainApp's output
folders.
>
> If you look at the build.xml for
> mxroyale/touredeflexexamples, it uses the
-module-output compiler option to
> redirect the output.
>
> If you look in the Browser
console, I expect you will see
> errors that it couldn’t find a particular JS file
for the module. Pay
> attention to the folders and adjust your build
script to place the output
> in the right place (or adjust where you tell
ModuleLoader to find the
> module.
>
> HTH,
> -Alex
>
> On 10/21/18, 11:22 PM, "Alina
Kazi" <[email protected]>
> wrote:
>
> Hi Alex,
>
> Created an example contains
two files :
> 1. Module.mxml
> <mx:Module xmlns:fx="
>
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fns.adobe.com%2Fmxml%2F2009&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999290960&sdata=MKP51sGDrTIYFArUTYRgH6FuIdCRoOCIPjpVR64XJDc%3D&reserved=0
> "
>
xmlns:mx="library://
> ns.apache.org/royale/mx">
>
> <mx:Label text="This
Label is in the module" />
> <mx:TextInput id="ti"
text="This TextInput is also
> in the module" />
> </mx:Module>
>
> 2. MainApp.mxml
> <mx:Application xmlns:fx="
>
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fns.adobe.com%2Fmxml%2F2009&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999290960&sdata=MKP51sGDrTIYFArUTYRgH6FuIdCRoOCIPjpVR64XJDc%3D&reserved=0
> "
>
xmlns:mx="library://
> ns.apache.org/royale/mx" >
>
> <mx:Button label="Btn in
Application" />
>
> <mx:ModuleLoader id =
"ml1" x="30" y="30" url =
> "Module.swf" />
>
> </mx:Application>
>
> No visual output shown . I
want it to work like
> examples\royale\ModuleExample
>
>
> Thanks in Advance ,
> Alina Kazi
>
> -----Original Message-----
> From: Alex Harui
[mailto:[email protected]]
> Sent: Tuesday, October 16,
2018 9:33 PM
> To: [email protected]
> Subject: Re: Getting An
Emulation Component To Run
>
> Hi Alina,
>
> I think there is a
misunderstanding somewhere.
>
> How has your company built
the Flex app over the past
> years? Is it all from an IDE or do you have some
sort of script or build
> tool?
>
> Whatever you are using to
build the Flex app should be
> translated to the Ant script. What is currently
in the Ant script you
> copied from tourdeflexmodules is custom designed
for tourdeflexmodules. It
> presumes lots of little applications that don't
use custom libraries.
>
> The mxmlc task in Ant is just
like running mxml from
> the command line or having an Application project
in an IDE.
> The compc task in Ant is just
like running compc from
> the command line or having a Library project in
an IDE.
>
> You can see from the
build.xml files in the
> royale-asjs repo that we build SWCs by having a
build.xml in each library
> folder and calling them from a build.xml in a
parent folder. You might
> find that pattern useful.
>
> You will need to understand
the -source-path and
> -library-path and -external-library-path and
other compiler options that
> were used to build the Flex app and copy probably
all of those options into
> the right place in the Ant scripts.
>
> It would be uncommon to
compile a file called shmUtil
> with mxmlc. shmUtil sounds like a file in a
library, not a standalone
> application. I'll bet it comes from a library
that should be compiled with
> compc along with a lot of other files.
>
>
> If you are having trouble
with Ant, also try the
> command-line, then others may be able to help you
see the differences
> between your Ant script and what worked on the
command-line. If you use an
> IDE to build the Flex app, you will need to find
out all of the compiler
> options the IDE sets up for you. I think others
can help you with that as
> well.
>
> -Alex
>
> On 10/16/18, 2:17 AM, "Alina
Kazi" <
> [email protected]> wrote:
>
> Hi Alex,
>
> Created a mxmlc task
directly in build.xml still
> an error is occured :
> Added to Build.xml :
>
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FwBDm&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999290960&sdata=ZuiXnvzQxolOK7rsx8%2F8JCmAG8daVfC2T1qG7cuh4cE%3D&reserved=0
> Error :
>
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FOXFT&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999290960&sdata=tBRJXpe4JHzu9HndjsTs9iQwHqDqXq%2FQhZrD%2FpuWtLI%3D&reserved=0
>
> Thanks,
> Alina Kazi
>
>
>
> -----Original Message-----
> From: Alex Harui
[mailto:[email protected]]
>
> Sent: Tuesday, October
16, 2018 11:46 AM
> To: [email protected]
> Subject: Re: Getting An
Emulation Component To Run
>
> Hi Alina,
>
> The example in
> examples/mxroyale/RemoteObjectAMFTest is working
and accesses the server
> that is in examples/amf/ SampleAmfWebApp.
Theoretically, your old
> mx:RemoteObject code should work untouched. Try
it without touching it and
> tell us what kinds of errors you are getting. If
you are getting runtime
> errors, see how the RemoteObjectAMFTest uses
"casting" to be explicit about
> the types of the RemoteObject expressions.
You'll see "as Operation" to
> indicate that an mx:method in an mx:RemoteObject
is an Operation.
>
> The compile-mxml macro is
in the build.xml file.
> It has certain expectations of the structure of
the source files. Your
> source files are likely have a different folder
structure. You will need
> to add source-paths and other compiler options to
the macro, or stop using
> the macro and call the mxmlc ant task directly.
That is up to you. This
> is a good opportunity to get to know Ant and the
compiler better.
>
> HTH,
> -Alex
>
> On 10/15/18, 11:07 PM,
"Alina Kazi" <
> [email protected]> wrote:
>
> Hi Alex & Carlos,
> I haven't tested my
ported Application with
> server side functionality yet.
> Can you please share
an Example that I can
> follow to get my mx:RemoteObject working as FLEX.
>
> I have another
question
>
> I am working on my
Application and it has two
> different directories like com->shm->modules->AP
and
> com->shm->modules->components and I want to
compile a file inside
> com->shm->modules->AP->abc.mxml and it uses a
file inside
> com->shm->modules->components->xyz.mxml.
> I have added
<compile-mxml
> folder="/com/shm/modules/AP/" example=" abc"/> to
build.xml.
> unable to access xyz
inside abc.
>
> Like
>
D:\apache-royale-0.9.3-bin-js-swf\royale-asjs\examples\mxroyale\tourdeflexmodules\src\spark\components\
> VideoPlayerExample.mxml is using VideoPlayer.mxml
in my case
> VideoPlayer.mxml is not is the same directory.
>
> Thanks,
> Alina Kazi
>
> -----Original
Message-----
> From: Carlos Rovira
[mailto:
> [email protected]]
> Sent: Tuesday,
October 16, 2018 12:26 AM
> To:
[email protected]
> Subject: Re: Getting
An Emulation Component To
> Run
>
> Hi Alex,
>
> yes, I added those
classes when worked trying
> to make it work in net RO, but I found a wall at
that time. I think DSK
> objects had a different code when deserialized,
and our AMF implementation
> was not able to handle that.
> I was not able to
know how to deal with that
> so I had to abandon. At least I could pass that
disabling small messages on
> BlazeDS.
>
> I don't think Small
Messages are very
> important, don't know how "small"
> will be, so I think
we can go to other things
> more important. If I found some problem as I
start to grow my application
> that could be related to small messages I'll
report. Hope not find any issue
>
> The only drawback
could be people coming that
> must know they need to disable small messages on
their BlazeDS.
>
> I think it will be
more important later since
> IExternalizable in itself seems an important
addition.
>
> Thanks
>
> Carlos
>
>
>
> El lun., 15 oct. 2018
a las 20:21, Alex Harui
> (<[email protected]>)
> escribió:
>
> > The classes that
represent DSK, DSA and DSC
> are in the MXRoyale and
> > Network projects,
but it looks like they
> implement IExternalizable. I
> > don't see any
evidence that the JS AMF
> support currently handles
> > IExternalizable.
> >
> > I'm not clear on
how important SmallMessages
> and IExternalizable are.
> > If it isn't that
important, there are plenty
> of other things to work
> > on. If it is
important, do we have a test
> case that uses IExternalizable?
> >
> > -Alex
> >
> > On 10/15/18, 10:55
AM, "Carlos Rovira" <
> [email protected]> wrote:
> >
> > Yes,
> >
> > I tried today
(with code
> pre-callProperty, that I think does not make
> > difference for
this).
> > There's small
message support in RPC
> classes, but when I looked at that
> > code when I
investigate it, I think must
> be accompanied from some AMF
> >
serialization/deserialization support. I
> couldn't find any resources on
> > this in the
internet about how to handle
> DSK, DSA or DSC. Maybe
> > you can ask
> > internally in
Adobe how to deal with
> that. My guess is that this
> > was added
> > to Flash plugin
AMF serialization
> capabilities.
> >
> >
> >
> >
> > El lun., 15
oct. 2018 a las 19:03, Alex
> Harui
> >
(<[email protected]>)
> > escribió:
> >
> > > Carlos,
> > >
> > > Have you
verified that small messages
> do not work with the MX
> > > RemoteObject?
I thought I saw Small
> Message support when I was
> > migrating
> > > the code.
> > >
> > > Thanks,
> > > -Alex
> > >
> > > On 10/15/18,
10:01 AM, "Carlos Rovira"
> <[email protected]>
> > wrote:
> > >
> > > Hi Alina,
> > >
> > > just for
if you don't know. If you
> use BlazeDS Java server,
> > remember
> > > to set
> > > up small
messages to false, or you
> RemoteObjects will not work.
> > To get
> > > small
messages we'll need to
> upgrade AMF
> >
serialization-deserialization
> > > to
> > > know how
to handle DSK, DSA, and
> DSC RemoteClass aliases.
> > >
> > > Best
> > >
> > > Carlos
> > >
> > >
> > > El lun.,
15 oct. 2018 a las 18:39,
> Alex Harui
> > >
(<[email protected]>)
> > > escribió:
> > >
> > > > Hi
Alina,
> > > >
> > > > Good to
know. You (and anybody
> working with the emulation
> > > components)
are
> > > >
expected to keep track of the
> commits to the royale-compiler
> > as well
> > > as the
> > > >
royale-asjs repos and stay
> updated. We are still finding bugs
> > in the
> > > >
transpiling that may affect you.
> > > >
> > > > Thanks,
> > > > -Alex
> > > >
> > > > On
10/15/18, 2:17 AM, "Alina
> Kazi" <[email protected]>
> > wrote:
> > > >
> > > > Hi
Alex,
> > > >
> > > >
Thanks a lot it worked for
> me.
> > > >
> > > >
-Alina kazi
> > > >
> > > >
-----Original Message-----
> > > >
From: Alex Harui [mailto:
> [email protected]]
> > > >
Sent: Monday, October 15,
> 2018 2:07 PM
> > > > To:
[email protected]
> > > >
Subject: Re: Getting An
> Emulation Component To Run
> > > >
> > > > Hi
Alina,
> > > >
> > > > Are
you sure you are using
> the latest compiler? Try
> > compiling
> > > >
> examples/mxroyale/RemoteObjectAMFTest. It
compiles without
> > errors
> > > for me.
> > > >
> > > > I
have to stop for tonight.
> Hopefully others will help
> > you.
> > > >
> > > >
-Alex
> > > >
> > > > On
10/15/18, 1:37 AM, "Alina
> Kazi" <[email protected]>
> > wrote:
> > > >
> > > >
Hi Alex,
> > > >
We are using MX Remote
> Object in almost our every
> > Class like
> > > this:
> > > >
<mx:RemoteObject
> > >
> channelSet="{parentApplication.amfChannelSet}"
> > > >
id="DataProviderService"
> showBusyCursor="true"
> > > >
> > > >
destination="shmBasic"
> fault="handleFault(event);"
> > > >
> > > >
result="handleResult(event);" />
> > > >
We get error ASBlocker
> subsystem.
> > > >
When we comment
> RemoteObject we need to comment methods
> > > those are
> > > > using
it.
> > > >
> > > >
I agree with that if I
> will delete some code for
> > compilation
> > > I
> > > > will
face other issues at later
> stage.
> > > >
> > > >
Can I replace
> mx:remoteObject with :
> > > >
<s:RemoteObject id="ro"
> endpoint="
> > > >
> > >
> >
>
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jamesward.com%2Fcensus2-tests%2Fmessagebroker%2Famf&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999290960&sdata=4sIL88V%2Bit8tvbuKSVwm9XeWmdDkO0yxSd4%2B5o5nth4%3D&reserved=0
> > > "
> > > >
destination="census"/>
> > > >
> > > >
Thanks in Advance,
> > > >
Alina Kazi
> > > >
> > > >
-----Original
> Message-----
> > > >
From: Alex Harui [mailto:
> [email protected]]
> > > >
Sent: Monday, October
> 15, 2018 1:16 PM
> > > >
To:
> [email protected]
> > > >
Subject: Re: Getting An
> Emulation Component To Run
> > > >
> > > >
Hi Alina,
> > > >
> > > >
I recommend just running
> the compiled application and
> > fixing
> > > >
problems as you run into them.
> > > >
> > > >
If you start copying
> code and deleting other code, you
> > cannot
> > > >
guarantee that the results will
> run. I'm not even sure
> > TitleWindow
> > > is a
> > > > valid
child control of an
> Application. Usually it is a popup
> > dialog.
> > > >
> > > >
When you run the
> application, you will probably find
> > > exceptions in
> > > > the
console. Set a breakpoint,
> see if you can figure out why
> > it is
> > > >
generating an exception. Change
> the code as needed.
> > > >
> > > >
If you aren’t getting
> exceptions, then look at the
> > element
> > > tree.
> > > > Either
all of the expected
> elements have been created or not.
> > If
> > > not, then
> > > > look at
the innermost element to
> see what it is. In the
> > properties
> > > for the
> > > > element
is a royale_wrapper
> property that points to the
> > transpiled
> > > AS3
> > > > class.
That can help you know
> what class didn't create its
> > children.
> > > > Check
the _beads array of that
> class to see if it created its
> > beads
> > > or
> > > > not.
If not, check the CSS for
> that element, or debug into
> > its code.
> > > >
Usually, addedToParent is where
> the view bead is added.
> > > >
> > > >
If the elements have
> been created, check the sizes.
> > Often
> > > some of
> > > > them
will have width or height =
> 0. Try to figure why it is
> > getting
> > > a bad
> > > > size.
> > > >
> > > >
If you take this
> approach, then if you get stuck you
> > can ask
> > > a
> > > > much
more specific question and
> we can give you more specific
> > > answers.
> > > >
> > > >
Unfortunately, our days
> only overlap by a few hours,
> > but I
> > > hope
> > > > other
committers can help as
> well. It is in their best
> > interest to
> > > improve
> > > > their
help and debugging skills.
> > > >
> > > >
-Alex
> > > >
> > > >
On 10/15/18, 12:59 AM,
> "Alina Kazi" <
> > [email protected]>
> > > wrote:
> > > >
> > > >
Hi Alex,
> > > >
As our whole
> application is compiled successfully
> > without
> > > > error
as a part of SparkRoyale
> Library.
> > > >
> > > >
Now, We have created
> a project like
> > tourdeflexmodules to
> > > > compile
and visually see the
> application output.
> > > >
Initially started
> with the basic(small) file of our
> > > >
application that is used by most
> of the files of our
> > Application.
> > > >
> > > >
We have a file in
> our application "Picklist.mxml"
> > > >
It was actually like
> :
> > > >
[1]
> > > >
> > >
> >
>
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FRVtj&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999290960&sdata=%2BVxE%2Btgxg37E%2FWFBkj6Bs%2BFTKm3o1RbzwORC1ZnFT2M%3D&reserved=0
> > > >
> > > >
we want to see it
> visually as all our mx and spark
> > > controls
> > > > are
already added in Apache
> Royale.
> > > >
Deleted whole code
> accept visual controls from src
> > file :
> > > >
[2]
> > > >
> > >
> >
>
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FH4Sm&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999290960&sdata=yhFRufdC9vB%2BmaKuo3rPCdG2DsfHq0%2BiSZ8mAWdwAU4%3D&reserved=0
> > > >
> > > >
Nothing shows inside
> spark BorderContainer &
> > TitleWindow.
> > > >
[3]
> > > >
> > >
> >
>
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FEpS8&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999300964&sdata=XEZqR0WI7%2FzzBIx4d6hQti9ezzLLRpMCzOcVa5OCZTI%3D&reserved=0
> > > >
How can we see all
> visual controls as they were in
> > Flex
> > > of
> > > > this
particular file.
> > > >
Even spark
> BorderContainer default.css is copied
> > from
> > > Flex
> > > >
->Royale.
> > > >
> > > >
Thanks,
> > > >
Alina Kazi
> > > >
> > > >
-----Original
> Message-----
> > > >
From: Alex Harui
> [mailto:[email protected]]
> > > >
Sent: Monday,
> October 15, 2018 11:15 AM
> > > >
To:
> [email protected]
> > > >
Subject: Re: Getting
> An Emulation Component To Run
> > > >
> > > >
Hi Alina,
> > > >
> > > >
Different APIs will
> have different solutions.
> > Pick an
> > > API you
> > > > want to
have work and let's
> discuss how to make it work.
> > > >
> > > >
-Alex
> > > >
> > > >
On 10/14/18, 10:48
> PM, "Alina Kazi" <
> > [email protected]
> > > >
> > > > wrote:
> > > >
> > > >
Hi Alex,
> > > >
> > > >
All mx and spark
> class methods those were left
> > empty
> > > for
> > > > the
compilation of Application.
> > > >
Also Module does
> not show anything on screen.
> > > >
> > > >
Thanks in
> Advance,
> > > >
Alina
> > > >
> > > >
-----Original
> Message-----
> > > >
From: Alex Harui
> [mailto:
> >
[email protected]]
> > > >
Sent: Thursday,
> October 11, 2018 12:32 PM
> > > >
To:
> [email protected]
> > > >
Subject: Re:
> Getting An Emulation Component To
> > Run
> > > >
> > > >
Hi Alina,
> > > >
> > > >
Which components
> or properties are you trying
> > to get
> > > to
> > > > run?
> > > >
> > > >
-Alex
> > > >
> > > >
On 10/10/18,
> 10:40 PM, "Alina Kazi" <
> > >
[email protected]>
> > > > wrote:
> > > >
> > > >
Hi Alex,
> > > >
> > > >
> > > >
> > > >
What if CSS
> for a component is not written
> > in
> > > Basic /
> > > > Express
defaults.css?
> > > >
> > > >
And We need
> it in MXRoyale / SparkRoyale
> > > >
> > > >
Thanks,
> > > >
> > > >
Alina Kazi
> > > >
> > > >
> > > >
> > > >
From: Alex
> Harui [mailto:[email protected]]
> > > >
Sent:
> Monday, October 08, 2018 8:40 PM
> > > >
To: Alina
> Kazi
> > > >
Subject: Re:
> Getting An Emulation
> > Component To
> > > Run
> > > >
> > > >
> > > >
> > > >
Hi Alina,
> > > >
> > > >
> > > >
> > > >
Please ask
> these questions on dev@ as
> > well.
> > > >
> > > >
> > > >
> > > >
CSS with
> ClassReference is a way to use
> > > Composition to
> > > >
customize components. Copying
> code is usually a bad practice
> > as it
> > > > creates
maintenance issues. So,
> in general, the preference
> > should
> > > be to
> > > > use CSS.
> > > >
> > > >
> > > >
> > > >
HTH,
> > > >
> > > >
-Alex
> > > >
> > > >
> > > >
> > > >
From: Alina
> Kazi <[email protected]>
> > > >
Date:
> Monday, October 8, 2018 at 2:02 AM
> > > >
To: Alex
> Harui <[email protected]>
> > > >
Subject:
> Getting An Emulation Component To
> > Run
> > > >
> > > >
> > > >
> > > >
Hi Alex,
> > > >
> > > >
We want to
> know how can we identify which
> > is the
> > > right
> > > > stub?
> > > >
> > > >
For Example:
> selected property written
> > > differently in
> > > >
CheckBox, RadioButton and
> > > >
> > > >
we want
> selected property for Button. How
> > can we
> > > >
identify and pick the right code
> for Button?
> > > >
> > > >
> > > >
> > > >
1.
> copying the little bits of code
> > from the
> > > > Basic
or Express version into
> the right stub in the Emulation
> > > Component
> > > >
> > > >
2.
> copying the CSS from Basic or
> > Express
> > > >
defaults.css into the MXRoyale
> or SparkRoyale defaults.css
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
Thanks in
> Advance,
> > > >
> > > >
Alina Kazi
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > > --
> > > Carlos
Rovira
> > >
> > >
> >
>
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fabout.me%2Fcarlosrovira&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999300964&sdata=H3oweoyqUtp%2BQ4z0SmjOxQhBLqasvSr04RQUwA4w76w%3D&reserved=0
> > >
> > >
> > >
> >
> > --
> > Carlos Rovira
> >
> >
>
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fabout.
> >
me%2Fcarlosrovira&data=02%7C01%7Caharui%
> 40adobe.com%7C04eb29f37fce
> >
>
40d3df9908d632c77330%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C6367
> >
>
52229546474497&sdata=7S2M%2BRlyCsWd2pShdvTsjfyJp9xyZ5bdaAc3zZQrilU
> > %3D&reserved=0
> >
> >
> >
>
> --
> Carlos Rovira
>
>
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fabout.me%2Fcarlosrovira&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999300964&sdata=H3oweoyqUtp%2BQ4z0SmjOxQhBLqasvSr04RQUwA4w76w%3D&reserved=0
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
--
Piotr Zarzycki
Patreon:
*https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.patreon.com%2Fpiotrzarzycki&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999300964&sdata=0hoONGV3E7erIqjMul7811MvEP5fQl89KSYxnNkT67M%3D&reserved=0
<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.patreon.com%2Fpiotrzarzycki&data=02%7C01%7Caharui%40adobe.com%7Cce20c74a6038404874b008d6431888f5%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636770169999300964&sdata=0hoONGV3E7erIqjMul7811MvEP5fQl89KSYxnNkT67M%3D&reserved=0>*
