Hi Swapnil, Where is your puppet master running? Is that the same machine where you run Stratos? You have to change the puppet ip and hostname in cartridge-config.properties file in <Stratos>/repository/conf directory. I think puppet-hostname cannot be your puppet hostname. Check the hostname in puppet master machine and update the above file.
You don't need to change the message broker port. It should be 1883. Basically when we run in distribution mode, we may have to change the following files in <Stratos>/repository/conf directory. 1. cartridge-config.properties - puppet master IP and hostname 2. jndi.properties - message broker setup 3. thrift-client-config.xml - CEP setup @Mari: Do we have above mentioned file configurations in wiki? I could not find any. I think we need to add these. Thank you! On Sun, Jun 28, 2015 at 7:55 PM, Swapnil Patil <swapnil.r...@gmail.com> wrote: > One more thing as per [1] I set mb_url to tcp://<my-mb-ip>:1883. I did not > change the port from what is mentioned in [1]. > > Should it be 61616 as per [2]? > > I checked netstat for machine on which ActiveMQ is running. I found LISTEN > entries for both 1883 and 61616. So thought of keeping it 1883 as per [1]. > > [1] > https://cwiki.apache.org/confluence/display/STRATOS/4.1.0+Configuring+Puppet+Master > [2] > https://cwiki.apache.org/confluence/display/STRATOS/4.0.0+Configuring+Puppet+Master > > Thanks and Regards, > Swapnil > > On Sun, Jun 28, 2015 at 2:12 PM, Swapnil Patil <swapnil.r...@gmail.com> > wrote: >> >> Hi Imesh, Pubudu, >> >> I configured puppet master again and restarted it. Then I created a new >> cartridge with puppet agent pointing to this master. In fact I did it one by >> one and tested at each step to find out what was the reason. >> >> After deploying application with this new image I still did not find >> screen.agent.log on spawned instance. >> >> While configuring cartridge there was 404 Not Found error for >> http://169.254.169.254/latest/user-data. Rest of the configuration ran >> without errors. Please find attached config.sh.log. >> >> I found only 3 logs launch-params, puppet-init.log, puppet_log. I have >> attached these. Also I have attached puppet.conf of spawned instance. >> >> Few observations- >> 1. In launch-params, PUPPET_IP is set as 127.0.0.1 and PUPPET_HOSTNAME is >> set as puppet-hostname. I am not sure if this is correct of these should be >> of master. >> >> 2. In puppet.conf, server is set as puppet-hostname and not the hostname >> of master. >> >> Thanks and Regards, >> Swapnil >> >> On Sat, Jun 27, 2015 at 3:57 PM, Swapnil Patil <swapnil.r...@gmail.com> >> wrote: >>> >>> Hi Imesh, Pubudu, >>> >>> I did not find screen.agent.log under /tmp in ec2 cartridge instance >>> created. Seems I did something wrong while configuring either puppet master >>> or creating cartridge. >>> >>> Currently I am verifying the steps for puppet configuration. >>> >>> Thanks and Regards, >>> Swapnil >>> >>> >>> >>> On Sat, Jun 27, 2015 at 12:39 PM, Imesh Gunaratne <im...@apache.org> >>> wrote: >>>> >>>> Hi Swapnil, >>>> >>>> Can you please verify the CEP IP and MB IP values passed into the EC2 >>>> instance created? You could find these values in the cartridge agent log >>>> file (/tmp/screen.agent.log). >>>> >>>> Thanks >>>> >>>> On Sat, Jun 27, 2015 at 12:56 PM, Swapnil Patil <swapnil.r...@gmail.com> >>>> wrote: >>>>> >>>>> Thanks Pubudu for the detailed information. >>>>> >>>>> I have not disabled mock iaas neither deleted the war file on my own. I >>>>> will check again if the war file is present. >>>>> >>>>> I have configured puppet master. I will verify all the steps again. >>>>> >>>>> Thanks and Regards, >>>>> Swapnil >>>>> >>>>> On Jun 27, 2015 12:33 PM, "Pubudu Gunatilaka" <pubu...@wso2.com> wrote: >>>>>> >>>>>> Hi Swapnil, >>>>>> >>>>>> You may have already disable the mock iaas when seting up the ec2 >>>>>> environment [1]. So this could be a reason for that as well. Above >>>>>> mentioned >>>>>> steps are correct for deploying app in mock iaas. >>>>>> >>>>>> You can find the cartridge agent log in the spawned ec2 instance. >>>>>> Please follow the below steps. >>>>>> >>>>>> 1. SSH to spawned ec2 instance. >>>>>> 2. Go to the /tmp directory. >>>>>> Here you should be able to find puppet logs as well as the agent log. >>>>>> Check both for any errors. You won't find the agent log if the puppet has >>>>>> not worked well. Check the puppet.conf file in /etc/puppet/ directory in >>>>>> ec2 >>>>>> spawned instance. Hostname and other configurations should be set up >>>>>> accordingly. >>>>>> >>>>>> Hope you have already setup your puppet master as well [2]. >>>>>> >>>>>> [1] - >>>>>> https://cwiki.apache.org/confluence/display/STRATOS/4.1.0+Install+Stratos+with+EC2+in+a+Testing+Environment >>>>>> [2] - >>>>>> https://cwiki.apache.org/confluence/display/STRATOS/4.1.0+Configuring+Puppet+Master >>>>>> >>>>>> Thank you! >>>>>> >>>>>> On Sat, Jun 27, 2015 at 12:10 PM, Swapnil Patil >>>>>> <swapnil.r...@gmail.com> wrote: >>>>>>> >>>>>>> Hi Pubudu, >>>>>>> >>>>>>> I used different partitions. Because I just ran deploy.sh in >>>>>>> samples/applications/simple/single-cartridge-app/scripts/mock. So this >>>>>>> script will use network partition defined in >>>>>>> samples/network-partitions/mock. (Before I ran this I had removed >>>>>>> earlier >>>>>>> network partition with undeploy.sh of ec2). Please correct me if I am >>>>>>> wrong >>>>>>> here. >>>>>>> >>>>>>> Sorry, I am not aware of this log. Could you please tell me the name >>>>>>> of this log and where can I find it? >>>>>>> >>>>>>> Thanks and Regards, >>>>>>> Swapnil >>>>>>> >>>>>>> On Sat, Jun 27, 2015 at 6:05 AM, Pubudu Gunatilaka <pubu...@wso2.com> >>>>>>> wrote: >>>>>>>> >>>>>>>> Hi Swapnil, >>>>>>>> >>>>>>>> Can you attach the cartridge agent log? You cannot deploy the same >>>>>>>> network partition in mock which you used in ec2. Configurations are >>>>>>>> different. >>>>>>>> >>>>>>>> Thank you! >>>>>>>> >>>>>>>> On Sat, Jun 27, 2015 at 9:47 AM, Swapnil Patil >>>>>>>> <swapnil.r...@gmail.com> wrote: >>>>>>>>> >>>>>>>>> Hi All, >>>>>>>>> >>>>>>>>> I have setup Stratos on one ec2 instance and MB on another ec2 >>>>>>>>> instance. When I try to deploy ec2 application using sample script, >>>>>>>>> application does get deployed and I can see ec2 instance being >>>>>>>>> created for >>>>>>>>> cartridge. >>>>>>>>> >>>>>>>>> But in wso2carbon.log I can only see messages till Member >>>>>>>>> initialized. Member started and rest messages do not appear. Same >>>>>>>>> happens >>>>>>>>> with the load balancer extension log. >>>>>>>>> >>>>>>>>> I tried deploy application on mock iaas to see if I get all >>>>>>>>> messages for that. But I got error invalid partition while running >>>>>>>>> deploy >>>>>>>>> script. >>>>>>>>> >>>>>>>>> Please find attached logs. I would appreciate any help to find out >>>>>>>>> the reason behind this and sort this out. >>>>>>>>> >>>>>>>>> Thanks and Regards, >>>>>>>>> Swapnil >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Pubudu Gunatilaka >>>>>>>> Software Engineer >>>>>>>> WSO2, Inc.: http://wso2.com >>>>>>>> lean.enterprise.middleware >>>>>>>> mobile: +94 77 4078049 >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Pubudu Gunatilaka >>>>>> Software Engineer >>>>>> WSO2, Inc.: http://wso2.com >>>>>> lean.enterprise.middleware >>>>>> mobile: +94 77 4078049 >>>> >>>> >>>> >>>> >>>> -- >>>> Imesh Gunaratne >>>> >>>> Senior Technical Lead, WSO2 >>>> Committer & PMC Member, Apache Stratos >>> >>> >> > -- Pubudu Gunatilaka Software Engineer WSO2, Inc.: http://wso2.com lean.enterprise.middleware mobile: +94 77 4078049
