I should add that i'm running under linux, a 2.4.19 kernel off the ppc-embedded tree.
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf > Of Rob Taylor > Sent: 23 October 2003 17:16 > To: [EMAIL PROTECTED] > Subject: C+T 69030 driver on powerpc > > > Has anyone sucessfully run the chips 69030 driver on powerpc > based systems? > I'm trying to get it running on a custon 7410 based board with two 69030's > on,a nd i;'m seing soem off things: > > my /proc/pci gives me that: > Bus 0, device 18, function 0: > VGA compatible controller: PCI device 102c:0c30 (Chips and > Technologies) > (rev 97). > IRQ 18. > Non-prefetchable 32 bit memory at 0xfa000000 [0xfaffffff]. > Bus 0, device 19, function 0: > VGA compatible controller: PCI device 102c:0c30 (Chips and > Technologies) > (rev 97). > IRQ 18. > Non-prefetchable 32 bit memory at 0xfb000000 [0xfbffffff]. > > at the moment i'm just attempting single head setup on device 18, > however i > find cPtr->PciInfo->memBase[0] is 0xff000000 when calulating > cPtr->FbAddress (in chipsPreInitHiQV) , rather than 0xfa000000! Does any > know any reason why xf86GetPciInfoForEntity would return incorrect > information, or have i got the wrong end of the stick? > Also does anyone know the reason for the addition of 0x800000 to the base > address in the big-endian case? > > Thanks to anyone who can spread some light on this for me! > > > Rob Taylor > Senior Developer robt at flyingpig dot com > Flying Pig Systems http://www.flyingpig.com > > Please avoid sending me Word or PowerPoint attachments. > See http://www.fsf.org/philosophy/no-word-attachments.html > > _______________________________________________ > Devel mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/devel > _______________________________________________ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel