On 03/21/21 13:46, Jon Nettleton wrote: > I am looking for some example code, or direction in how SR-IOV > functions are expected to be picked up by the platform pcie host > library so it can setup required bits like LUTs. Currently the > HostLib is getting the gEfiPciIoProtocolGuid event and then setting > the controller up based on the BDF. I see that PciScanBus is > detecting the VF's and calling PciAllocateBusNumber(). > > PCI-IOV ScanBus - SubBusNumber - 0x2 > PciBus: Discovered PPB @ [00|00|00] > > However my setup function is only ever triggered with the real device > BDF's...
What do you mean by "setup function"? If you have a UEFI driver that follows the UEFI driver model, i.e. it installs at least one instance of the Driver Binding protocol, then it's up to platform BDS to call ConnectController() on those devices that should be connected per platform policy. > Is it up to me to check for the VFs if SR-IOV is enabled and > set them up manually? Is there another event I should be listening to > that will be triggered for VF's vs PF's? My guess is that platform BDS does not try to connect the PciIo instances that stand for VFs to any drivers. In the UEFI shell, try running dh -d -v -p PciIo Pick a handle ID that appears to stand for a VF, then run connect <that handle> Thanks Laszlo > > Any pointers would be very helpful. > > -Jon > > > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#73149): https://edk2.groups.io/g/devel/message/73149 Mute This Topic: https://groups.io/mt/81498733/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
