Please update test case to not expect failure when setting a non-present range 
as non-present .

> -----Original Message-----
> From: Tan, Dun <dun....@intel.com>
> Sent: Wednesday, March 8, 2023 6:08 PM
> To: devel@edk2.groups.io
> Cc: Dong, Eric <eric.d...@intel.com>; Ni, Ray <ray...@intel.com>; Kumar,
> Rahul R <rahul.r.ku...@intel.com>; Gerd Hoffmann <kra...@redhat.com>
> Subject: [Patch V2 06/14] UefiCpuPkg/CpuPageTableLib: Add manual test to
> check Mask and Attr
> 
> Add manual test case to check input Mask and Attribute. When
> creating new page table or mapping not-present range in existing
> page table, all the non-reserved fields of Mask and Present bit of
> Attribute should not be 0.
> 
> Signed-off-by: Dun Tan <dun....@intel.com>
> Cc: Eric Dong <eric.d...@intel.com>
> Cc: Ray Ni <ray...@intel.com>
> Cc: Rahul Kumar <rahul1.ku...@intel.com>
> Cc: Gerd Hoffmann <kra...@redhat.com>
> ---
> 
> UefiCpuPkg/Library/CpuPageTableLib/UnitTest/CpuPageTableLibUnitTestHo
> st.c | 110
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> +++++++++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 109 insertions(+), 1 deletion(-)
> 
> diff --git
> a/UefiCpuPkg/Library/CpuPageTableLib/UnitTest/CpuPageTableLibUnitTest
> Host.c
> b/UefiCpuPkg/Library/CpuPageTableLib/UnitTest/CpuPageTableLibUnitTest
> Host.c
> index 3014a03243..fe00a7f632 100644
> ---
> a/UefiCpuPkg/Library/CpuPageTableLib/UnitTest/CpuPageTableLibUnitTest
> Host.c
> +++
> b/UefiCpuPkg/Library/CpuPageTableLib/UnitTest/CpuPageTableLibUnitTest
> Host.c
> @@ -697,6 +697,114 @@ TestCaseManualChangeNx (
>    return UNIT_TEST_PASSED;
>  }
> 
> +/**
> +  Check if the input Mask and Attribute is expected when creating new page
> table or
> +  map not-present range in existing page table.
> +
> +  @param[in]  Context    [Optional] An optional parameter that enables:
> +                         1) test-case reuse with varied parameters and
> +                         2) test-case re-entry for Target tests that need a
> +                         reboot.  This parameter is a VOID* and it is the
> +                         responsibility of the test author to ensure that the
> +                         contents are well understood by all test cases that 
> may
> +                         consume it.
> +
> +  @retval  UNIT_TEST_PASSED             The Unit test has completed and the
> test
> +                                        case was successful.
> +  @retval  UNIT_TEST_ERROR_TEST_FAILED  A test case assertion has failed.
> +**/
> +UNIT_TEST_STATUS
> +EFIAPI
> +TestCaseToCheckMapMaskAndAttr (
> +  IN UNIT_TEST_CONTEXT  Context
> +  )
> +{
> +  UINTN               PageTable;
> +  PAGING_MODE         PagingMode;
> +  VOID                *Buffer;
> +  UINTN               PageTableBufferSize;
> +  IA32_MAP_ATTRIBUTE  MapAttribute;
> +  IA32_MAP_ATTRIBUTE  ExpectedMapAttribute;
> +  IA32_MAP_ATTRIBUTE  MapMask;
> +  RETURN_STATUS       Status;
> +  IA32_MAP_ENTRY      *Map;
> +  UINTN               MapCount;
> +
> +  PagingMode                = Paging4Level;
> +  PageTableBufferSize       = 0;
> +  PageTable                 = 0;
> +  Buffer                    = NULL;
> +  MapAttribute.Uint64       = 0;
> +  MapAttribute.Bits.Present = 1;
> +  MapMask.Uint64            = 0;
> +  MapMask.Bits.Present      = 1;
> +  //
> +  // Create Page table to cover [0, 1G]. All fields of MapMask should be set.
> +  //
> +  Status = PageTableMap (&PageTable, PagingMode, Buffer,
> &PageTableBufferSize, 0, SIZE_1GB, &MapAttribute, &MapMask);
> +  UT_ASSERT_EQUAL (Status, RETURN_INVALID_PARAMETER);
> +  MapMask.Uint64 = MAX_UINT64;
> +  Status         = PageTableMap (&PageTable, PagingMode, Buffer,
> &PageTableBufferSize, 0, SIZE_1GB, &MapAttribute, &MapMask);
> +  UT_ASSERT_EQUAL (Status, RETURN_BUFFER_TOO_SMALL);
> +  Buffer = AllocatePages (EFI_SIZE_TO_PAGES (PageTableBufferSize));
> +  Status = PageTableMap (&PageTable, PagingMode, Buffer,
> &PageTableBufferSize, 0, SIZE_1GB, &MapAttribute, &MapMask);
> +  UT_ASSERT_EQUAL (Status, RETURN_SUCCESS);
> +
> +  //
> +  // Update Page table to cover [1G, 2G - 8K]. All fields of MapMask should
> be set and Present bit of MapAttribute should be 1.
> +  //
> +  PageTableBufferSize       = 0;
> +  MapAttribute.Uint64       = SIZE_1GB;
> +  MapAttribute.Bits.Present = 1;
> +  MapMask.Uint64            = 0;
> +  MapMask.Bits.Present      = 1;
> +  Status                    = PageTableMap (&PageTable, PagingMode, Buffer,
> &PageTableBufferSize, SIZE_1GB, SIZE_1GB - SIZE_8KB, &MapAttribute,
> &MapMask);
> +  UT_ASSERT_EQUAL (Status, RETURN_INVALID_PARAMETER);
> +  MapMask.Uint64 = MAX_UINT64;
> +  Status         = PageTableMap (&PageTable, PagingMode, Buffer,
> &PageTableBufferSize, SIZE_1GB, SIZE_1GB - SIZE_8KB, &MapAttribute,
> &MapMask);
> +  UT_ASSERT_EQUAL (Status, RETURN_BUFFER_TOO_SMALL);
> +  Buffer = AllocatePages (EFI_SIZE_TO_PAGES (PageTableBufferSize));
> +  Status = PageTableMap (&PageTable, PagingMode, Buffer,
> &PageTableBufferSize, SIZE_1GB, SIZE_1GB - SIZE_8KB, &MapAttribute,
> &MapMask);
> +  UT_ASSERT_EQUAL (Status, RETURN_SUCCESS);
> +
> +  //
> +  // Update Page table to cover [2G - 8K, 2G] and set [2G - 8K, 2G] as RW. 
> All
> fields of MapMask should be set and Present bit of MapAttribute should be 1.
> +  //
> +  PageTableBufferSize         = 0;
> +  MapAttribute.Uint64         = SIZE_2GB - SIZE_8KB;
> +  MapAttribute.Bits.ReadWrite = 1;
> +  MapMask.Uint64              = MAX_UINT64;
> +  Status                      = PageTableMap (&PageTable, PagingMode, Buffer,
> &PageTableBufferSize, SIZE_2GB - SIZE_8KB, SIZE_8KB, &MapAttribute,
> &MapMask);
> +  UT_ASSERT_EQUAL (Status, RETURN_INVALID_PARAMETER);
> +  MapAttribute.Bits.Present = 1;
> +  Status                    = PageTableMap (&PageTable, PagingMode, Buffer,
> &PageTableBufferSize, SIZE_2GB - SIZE_8KB, SIZE_8KB, &MapAttribute,
> &MapMask);
> +  UT_ASSERT_EQUAL (Status, RETURN_SUCCESS);
> +
> +  MapCount = 0;
> +  Status   = PageTableParse (PageTable, PagingMode, NULL, &MapCount);
> +  UT_ASSERT_EQUAL (Status, RETURN_BUFFER_TOO_SMALL);
> +  Map    = AllocatePages (EFI_SIZE_TO_PAGES (MapCount* sizeof
> (IA32_MAP_ENTRY)));
> +  Status = PageTableParse (PageTable, PagingMode, Map, &MapCount);
> +  UT_ASSERT_EQUAL (Status, RETURN_SUCCESS);
> +
> +  //
> +  // There should be two ranges [0, 2G-8k] with RW = 0 and [2G-8k, 2G] with
> RW = 1
> +  //
> +  UT_ASSERT_EQUAL (MapCount, 2);
> +  UT_ASSERT_EQUAL (Map[0].LinearAddress, 0);
> +  UT_ASSERT_EQUAL (Map[0].Length, SIZE_2GB - SIZE_8KB);
> +  ExpectedMapAttribute.Uint64       =  0;
> +  ExpectedMapAttribute.Bits.Present =  1;
> +  UT_ASSERT_EQUAL (Map[0].Attribute.Uint64,
> ExpectedMapAttribute.Uint64);
> +  UT_ASSERT_EQUAL (Map[1].LinearAddress, SIZE_2GB - SIZE_8KB);
> +  UT_ASSERT_EQUAL (Map[1].Length, SIZE_8KB);
> +  ExpectedMapAttribute.Uint64         =   SIZE_2GB - SIZE_8KB;
> +  ExpectedMapAttribute.Bits.Present   = 1;
> +  ExpectedMapAttribute.Bits.ReadWrite = 1;
> +  UT_ASSERT_EQUAL (Map[1].Attribute.Uint64,
> ExpectedMapAttribute.Uint64);
> +  return UNIT_TEST_PASSED;
> +}
> +
>  /**
>    Initialize the unit test framework, suite, and unit tests for the
>    sample unit tests and run the unit tests.
> @@ -746,7 +854,7 @@ UefiTestMain (
>    AddTestCase (ManualTestCase, "Check if the parent entry has different
> ReadWrite attribute", "Manual Test Case5",
> TestCaseManualChangeReadWrite, NULL, NULL, NULL);
>    AddTestCase (ManualTestCase, "Check if the parent entry has different Nx
> attribute", "Manual Test Case6", TestCaseManualChangeNx, NULL, NULL,
> NULL);
>    AddTestCase (ManualTestCase, "Check if the needed size is expected",
> "Manual Test Case7", TestCaseManualSizeNotMatch, NULL, NULL, NULL);
> -
> +  AddTestCase (ManualTestCase, "Check MapMask when creating new page
> table or mapping not-present range", "Manual Test Case8",
> TestCaseToCheckMapMaskAndAttr, NULL, NULL, NULL);
>    //
>    // Populate the Random Test Cases.
>    //
> --
> 2.31.1.windows.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#101195): https://edk2.groups.io/g/devel/message/101195
Mute This Topic: https://groups.io/mt/97469478/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: 
https://edk2.groups.io/g/devel/leave/9847357/21656/1706620634/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


Reply via email to