Sahlan, There is a potential routing issue, you have the same network connected to different devices (usb networking and vm/dev networks) so the machine may end up sending packets over one interface but not the other and vice versa. It's not advisable in general to work like that since you are making trouble shooting that much harder for yourself because you now have to account for unpredictable and undefined network behavior. Regards, Eli
Op di 23 jul. 2019 om 23:29 schreef Sahlan <sah...@businessassistant.biz>: > Eli, > > My development PCs and VMs running on OSX (about twelve in total) each > use a static i.p. address from that range, but not the 192.168.2.15 address > that the phone is currently set to. No devices use DHCP. Are you saying > there might still be a clash with an address used by the Jolla subnet of > which I won't be aware? Tomorrow I will install arp-scan to see if it can > pick up an address clash problem. I will also try making a connection by > wi-fi instead of usb, as the phone reports wifi as being on the 192.168.3.x > subnet. When I added the Jolla phone, it reported success, but, as I said > in my second email, the Debug / Start and Break on Main does not seem to be > working. > > Regards, > > Sahlan > > ------ Original Message ------ > From: "E.S. Rosenberg" <es.rosenberg+sailfishos....@gmail.com> > To: "Sahlan" <sah...@businessassistant.biz>; "Sailfish OS Developers" < > devel@lists.sailfishos.org> > Sent: 23/07/2019 19:38:41 > Subject: Re: [SailfishDevel] Question about connecting a Sailfish phone to > Ubuntu Linux box > > Sahlan, > Did you change your LAN to not be on 192.168.2.0/24? > As mentioned previously your LAN IPs clash with the Jolla USB subnet and > this *will* lead to unpredictable behavior. > HTH, > Eliyahu - אליהו > > Op di 23 jul. 2019 om 18:59 schreef Sahlan <sah...@businessassistant.biz>: > >> Hello, >> >> Thanks to the several people who gave advice on my problem, I have made >> progress. >> a) I updated my Jolla phone to the latest update it was offering: 3.0.0.8 >> b) I updated VirtualBox on Ubuntu to the new version 6 >> c) I uninstalled and reinstalled the Sailfish SDK, same version as >> before, 2.1.1, but this time I ticked the boxes to add images for my >> updated phone OS, 3.0.0.8 >> d) I made no changes to my settings for the phone Developer Mode, but I >> did open the terminal and issue the command devel-su >> e) Now, when I tried to add the phone hardware, the result was successful. >> >> I then built a skeleton Sailfish app in Qt Creator with the phone being >> the target. I added no code to the default code created. As you would >> expect, it builds fine. Now I am confused as what to do next. In >> Xamarin-Android development one naturally proceeds to the deploy stage, so >> I did that in QtCreator and chose the Build / Deploy option, and it told me >> RPMs had been created OK, but, under the Issues tab, I get the message "No >> RPM validation suite is available for the current Sailfish OS build target, >> the package will not be validated" >> >> Then I clicked Debug / Start and Break on Main, but nothing happens. >> I've searched for info on how to debug on Sailfish with QtCreator but >> haven't found anything. Can anyone suggest a url for a step by step page of >> instructions? >> >> PS Having updated my phone to 3.0.0.8, I see a message telling me >> 3.1.0.11 is available. I wonder if it is going to work its way >> incrementally through the available updates :) >> >> Regards, >> >> Sahlan >> >> ------ Original Message ------ >> From: "David Llewellyn-Jones" <da...@flypig.co.uk> >> To: devel@lists.sailfishos.org >> Sent: 19/07/2019 11:04:27 >> Subject: Re: [SailfishDevel] Question about connecting a Sailfish phone >> to Ubuntu Linux box >> >> On 19/07/2019 12:27, Sahlan wrote: >> [snip] >> >> I have >> purchased a phone which is running Sailfish 3 and have set up Developer >> Mode on it. On Ubuntu 18.04 LTS, I installed the Sailfish Qt Creator IDE >> and built a simple test app. >> >> >> Which phone are you using? Did you flash it over USB to install >> Sailfish? Your setup with Ubuntu is pretty standard, so it should work. >> >> It's an obvious question, but did you, activate the Remote connection >> option, and give yourself a root password? >> >> >> https://jolla.zendesk.com/hc/en-us/articles/202011863-How-to-enable-Developer-Mode >> >> >> I connected the Sailfish phone via USB and >> confirmed with lsusb that the device is recognised as being connected. >> Under Tools / Options / Devices, I try to add the phone as a Sailfish OS >> Physical Device. The IP address, username and password correctly >> correspond to those on the phone, but clicking "Test Connection" always >> gives me the message "Host unreachable". Increasing the SSH timeout does >> not help. I also tried pinging the i.p. address of the phone from a >> terminal window, and it is not found, though I am not sure whether ping >> should work with i.p. over usb. >> >> >> Pinging should work over USB, and personally I'd focus on getting that >> to work first, since until you can ping it's unlikely ssh will work. >> >> It might also be worth trying to ping in the opposite direction (i.e >> pinging your computer from the phone over USB) by opening a console on >> the phone and using something like this: >> >> su-devel ping 192.16.2.6 >> >> Some of the advice on this page may also be useful (if not now, then >> once you have a connection!): >> >> https://sailfishos.org/wiki/Sailfish_OS_Cheat_Sheet >> >> David >> -- >> Website: http://www.flypig.co.uk >> _______________________________________________ >> SailfishOS.org Devel mailing list >> To unsubscribe, please send a mail to >> devel-unsubscr...@lists.sailfishos.org >> >> _______________________________________________ >> SailfishOS.org Devel mailing list >> To unsubscribe, please send a mail to >> devel-unsubscr...@lists.sailfishos.org > >
_______________________________________________ SailfishOS.org Devel mailing list To unsubscribe, please send a mail to devel-unsubscr...@lists.sailfishos.org
