On Sun, Jul 5, 2020 at 12:48 AM Mritunjay Sharma < mritunjaysharma...@gmail.com> wrote:
> > > On Sun, Jul 5, 2020 at 12:28 AM Heinz Junkes <jun...@fhi-berlin.mpg.de> > wrote: > >> Hello, Mritunjay, >> that's good news. Don't you want to try to develop a rsb-set for exactly >> this combination of RTEMS4.10 and EPICS7? >> > > Sure, I am ready to do this and then do it with RTEMS5 in the same way. > Please tell how to begin or some existing similar > work that can guide me how to proceed further in relation to rsb-set for > RTEMS4.10 and EPICS7. > > Then it should be no problem to do it with RTEMS5 in the same way. >> Did you also run the tests on Epics and also tried the pc386-qemu? >> > [UPDATE]: I just finished trying pc386-qemu. The 'make' in epics-base ran successfully. After which I ran the Ran the EPICS test suites for RTEMS in QEMU using the following command: ```qemu-system-i386 -no-reboot -m 128 -boot n -serial stdio -net nic -net user,tftp=$PWD,bootfile=bin/RTEMS-pc386-qemu/dbTestHarness``` The QEMU emulator successfully opened then and it showed that all the tests passed. I am attaching the screenshot as well. Please check and tell if I have done things correctly. Thanks Mritunjay > I did the following steps after the build: > > i) Created a new directory to hold the application source and then `cd' to > that directory. > ii) Run the makeBaseApp.pl program to create the example application: > iii) makeBaseApp.pl -t example test > iv) makeBaseApp.pl -i -t example -a RTEMS-pc386 test > > I then Built the example application by running > 'make' > > All the steps ran without error. > > I didn't test further after this. I haven't tried for pc396-qemu yet, > I will try though today. > > Thanks > Mritunjay. > > Greetings Heinz >> >> > On 3. Jul 2020, at 23:56, Mritunjay Sharma < >> mritunjaysharma...@gmail.com> wrote: >> > >> > [UPDATE]: After using --enable-posix, the 'make' in epics-base worked >> successfully. >> > With all of yours support, there are no errors. Everything seems to be >> in order. >> > >> > Heinz, as you suggested, now I have built EPICS with RTEMS 4.10 for >> pc-386 and as advised that after this >> > we can take care of RTEMS5 (or 6?) and libbsd as I have learnt now how >> to build EPICS and I think we can develop >> > a first rsb-set for it. >> > >> > Please advise on what to begin with next. >> > >> > Thanks >> > Mritunjay >> >>
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
