I did build the leon3 bsp and I still don't see the psxtimer02 as an executable. Is there a way build a test from source? I have the sources for psxtest02. Also i'm thinking that it could be due to the fact that i don't have posix tests enabled. Is there a way that to enable posix?
Thanks Zack Sent with ProtonMail Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Monday, March 29, 2021 8:11 PM, zack_on_the_speed_chanel <zack_on_the_speed_cha...@protonmail.ch> wrote: > Sorry that assumption was very native of me that i didn't have a working > baseline. Joel said that the erc32 was similar to the leon bsp > > " > The ERC32 what's the first space hardened sparc processor. The leon3 is a > later processor in the same family. Both use the same build of GCC and are > just different bsps. In fact both run on the same sis simulator. " > I also though that the bsps were the same and I can work on the issue with > only the erc32 BSP. I have one more question: when i run the hello world > test. All the test files are within one specific directory and I don't see > the executables for specific bsps that's why i thought all tests would be > built (there would not be any specific considerations for bsps) . > > Sent with ProtonMail Secure Email. > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Monday, March 29, 2021 2:45 PM, Gedare Bloom ged...@rtems.org wrote: > > > On Sun, Mar 28, 2021 at 1:26 PM zack_on_the_speed_chanel > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > Hello all, > > > I'm updating on what' i've found out with the issue (forgot to reply all) > > > . Joel recommended me check the coverage for the leon BSP( to check if > > > it's supported) and i found that the branch with CLOCK_MONOTONIC was not > > > reached I think now that it's supported (because the annotated assembly > > > is in the sparc instruction set). I also found out that the test would be > > > similar to Psxclock02 and it runs the same tests on a different clock. > > > Then I tried to build the psxclock02 test , change the create_clock to > > > have the clock_monotonic argument and i didn't see the executable or any > > > change in the ./waf build. Then I was suggested that you have to enable > > > all tests some how? How do i enable all tests? > > > > Do you use something like: ./waf bsp_defaults ---rtems-bsp=leon3 > > > config.ini > > Then, take a look, BUILD_TESTS and BUILD_PSXTESTS are two options that > > if either is True it should build psxclock02. > > When you write code, you should first make sure you can build the code > > as it exists if it is supposed to work, and run it to see that it > > works. Then you should make changes from a working baseline. Otherwise > > when you get a problem, how do you know if the problem is your > > problem, or it already existed? > > > > > Thanks > > > Zack > > > devel mailing list > > > devel@rtems.org > > > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel