On Mon, Dec 14, 2015 at 03:42:13PM -0700, Joshua Henderson wrote:
> From: Andrei Pistirica <[email protected]>
> 
> Document the devicetree bindings for the SDHCI peripheral found on
> Microchip PIC32 class devices.
> 
> Signed-off-by: Andrei Pistirica <[email protected]>
> Signed-off-by: Joshua Henderson <[email protected]>
> Cc: Ralf Baechle <[email protected]>

Acked-by: Rob Herring <[email protected]>

> ---
>  .../bindings/mmc/microchip,sdhci-pic32.txt         |   29 
> ++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
> 
> diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt 
> b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
> new file mode 100644
> index 0000000..71ad57e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
> @@ -0,0 +1,29 @@
> +* Microchip PIC32 SDHCI Controller
> +
> +This file documents differences between the core properties in mmc.txt
> +and the properties used by the sdhci-pic32 driver.
> +
> +Required properties:
> +- compatible: Should be "microchip,pic32mzda-sdhci"
> +- interrupts: Should contain interrupt
> +- clock-names: Should be "base_clk", "sys_clk".
> +               See: Documentation/devicetree/bindings/resource-names.txt
> +- clocks: Phandle to the clock.
> +          See: Documentation/devicetree/bindings/clock/clock-bindings.txt
> +- pinctrl-names: A pinctrl state names "default" must be defined.
> +- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
> +             See: 
> Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
> +
> +Example:
> +
> +     sdhci@1f8ec000 {
> +             compatible = "microchip,pic32mzda-sdhci";
> +             reg = <0x1f8ec000 0x100>;
> +             interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
> +             clocks = <&REFCLKO4>, <&PBCLK5>;
> +             clock-names = "base_clk", "sys_clk";
> +             bus-width = <4>;
> +             cap-sd-highspeed;
> +             pinctrl-names = "default";
> +             pinctrl-0 = <&pinctrl_sdhc1>;
> +     };
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to