Just one more comment, being on agreement with the previous postings...
on a "linear transponder" (as a SSB transceiver becomes usually on HF
between your antenna and your soundcard) just rock the transceiver's
dial to make the tones fall in the proper place in the spectrum.
FLdigi has a sweetspot setting that MIGHT help to set the baseband start
at 1500 Hz (I am not sure because I have not used it).
On FM (F2D), it is something else, as you must make the baseband tones
coincide.Simon just hit the nail once again.
73,
Jose, CO2JA
---
Simon (HB9DRV) escribió:
----- Original Message -----
From: "kh6ty" <kh...@comcast.net>
The standard for MT63 is to start at 500 Hz. Fldigi follows the accepted
standard. Anyone wishing to use fldigi and flarq together on MT63 will
have to follow the standard and only use MT63-1000 or MT63-2000 as other
versions have too much latency for flarq
Being more exact - Pawel, the designer of MT63 specifically set the lower
frequency to 500Hz. fldigi and DM780 use Pawel's code, it is not a trivial
task to work out how to allow a different starting frequency.
As Skip says, the MT63 standard is to start at 500Hz. I think MARS have
decided to use some other default but it's really their problem.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
__________ Información de ESET NOD32 Antivirus, versión de la base de firmas de
virus 3832 (20090206) __________
ESET NOD32 Antivirus ha comprobado este mensaje.
http://www.eset.com
Participe en Universidad 2010, del 8 al 12 de febrero de 2010
La Habana, Cuba
http://www.universidad2010.cu
---------------------------------------------------------------------
SEGUNDO SEMINARIO INTERNACIONAL LEGADO Y DIVERSIDAD. ARQUITECTURA Y URBANISMO.
El rescate de los valores urbanos y arquitectónicos en tiempos de
globalización
Colegio de San Gerónimo, La Habana Vieja, noviembre 24-27, 2009
---------------------------------------------------------------------
