Hi, I want to ask some about usba. I try to exec this command: mouette@openindiana:~# update_drv -a -i '"usbif56a,30e"' usbwcm devfsadm: driver failed to attach: usbwcm Warning: Driver (usbwcm) successfully added to system but failed to attach
Then try to rename /kernel/drv/hid or remove this line of hid in /etc/driver_aliases, after reboot this system, plug this device, it still want call hid module. (appear msg that hid module not found) But i not found these codes about special assign hid driver in illumos-gate/usr/src/uts/common/io/usb/usba And i not understand why always attached by hid driver, so everyone can help me or give me a trace direction? Thanks a lot. 2015-02-15 13:35 GMT+08:00 Garrett D'Amore <[email protected]>: > The device is getting handled by the generic HID device which is probably > wrong. Unfortunately I'm not in front of a computer right now and I don't > see a specific USB device string. But when you know it you can try to use > it with update_drv -a -i {alias} usbwcm where {alias} is the appropriate > device alias. However this will not work if the device isn't actually > compatible with the usbwcm driver which I think might actually be fairly > likely. > > To figure that out probably requires some level of research against one of > the other free operating systems. It helps also to have access to hardware > for testing. > > To be honest these are kind of desktop devices and definitely receive > second class support compared to server hardware. > > Maybe you can find a developer who can help you further. I could try but > to be honest I'm not very much inclined since I don't have this hardware > myself. > > Nonetheless I wish you luck. > > Sent from my iPhone > > On Feb 14, 2015, at 8:05 PM, L'oiseau de mer via illumos-discuss < > [email protected]> wrote: > > Hi, everyone > My system is openindiana 151a9, and try to develop usbwcm module. > When build success in illumos-gate, i place it to /kernel/drv/ and > /kernel/strmod/ > But when add driver, it appear these err msgs: > mouette@openindiana:/kernel/drv# update_drv usbwcm > devfsadm: driver failed to attach: usbwcm > Warning: Driver (usbwcm) successfully added to system but failed to attach > mouette@openindiana:/kernel/drv# devfsadm -i usbwcm -v > devfsadm: driver failed to attach: usbwcm > exit status = 1 > > > When i plug this device(wacom intuos pen small(CTL-480/S)), dmesg looks > like this device is assigned wrong driver(hid?) and my debug msgs in > usbwcm.c is not showed: > > Feb 15 11:56:15 openindiana usba: [ID 912658 kern.info] USB 2.0 device > (usb56a,30e) operating at full speed (USB 1.x) on USB 2.0 external hub: > device@2, usb_mid2 at bus address 4 > Feb 15 11:56:15 openindiana usba: [ID 349649 kern.info] Wacom > Co.,Ltd. Intuos PS > Feb 15 11:56:15 openindiana genunix: [ID 936769 kern.info] usb_mid2 is > /pci@0,0/pci1043,1287@1d/hub@1/device@2 > Feb 15 11:56:15 openindiana genunix: [ID 408114 kern.info] /pci@0 > ,0/pci1043,1287@1d/hub@1/device@2 (usb_mid2) online > Feb 15 11:56:15 openindiana usba: [ID 912658 kern.info] USB 2.0 interface > (usbif56a,30e.config1.0) operating at full speed (USB 1.x) on USB 2.0 > external hub: input@0, hid3 at bus address 4 > Feb 15 11:56:15 openindiana usba: [ID 349649 kern.info] Wacom > Co.,Ltd. Intuos PS > Feb 15 11:56:15 openindiana genunix: [ID 936769 kern.info] hid3 is /pci@0 > ,0/pci1043,1287@1d/hub@1/device@2/input@0 > Feb 15 11:56:15 openindiana genunix: [ID 408114 kern.info] /pci@0 > ,0/pci1043,1287@1d/hub@1/device@2/input@0 (hid3) online > Feb 15 11:56:15 openindiana usba: [ID 912658 kern.info] USB 2.0 interface > (usbif56a,30e.config1.1) operating at full speed (USB 1.x) on USB 2.0 > external hub: input@1, hid4 at bus address 4 > Feb 15 11:56:15 openindiana usba: [ID 349649 kern.info] Wacom > Co.,Ltd. Intuos PS > Feb 15 11:56:15 openindiana genunix: [ID 936769 kern.info] hid4 is /pci@0 > ,0/pci1043,1287@1d/hub@1/device@2/input@1 > Feb 15 11:56:15 openindiana genunix: [ID 408114 kern.info] /pci@0 > ,0/pci1043,1287@1d/hub@1/device@2/input@1 (hid4) online > Feb 15 11:56:15 openindiana usba: [ID 912658 kern.info] USB 2.0 interface > (usbif56a,30e.config1.2) operating at full speed (USB 1.x) on USB 2.0 > external hub: mouse@2, hid5 at bus address 4 > Feb 15 11:56:15 openindiana usba: [ID 349649 kern.info] Wacom > Co.,Ltd. Intuos PS > Feb 15 11:56:15 openindiana genunix: [ID 936769 kern.info] hid5 is /pci@0 > ,0/pci1043,1287@1d/hub@1/device@2/mouse@2 > Feb 15 11:56:15 openindiana genunix: [ID 408114 kern.info] /pci@0 > ,0/pci1043,1287@1d/hub@1/device@2/mouse@2 (hid5) online > > I notice that usbwcm is not auto-loaded, neet manually exec modload it, > but it still not my debug msgs in dmesg. > mouette@openindiana:/kernel/drv# modinfo | grep usbwcm > 295 fffffffff868c000 37d0 - 1 usbwcm (USB Wacom STRMOD) > *illumos-discuss* | Archives > <https://www.listbox.com/member/archive/182180/=now> > <https://www.listbox.com/member/archive/rss/182180/22003744-9012f59c> | > Modify > <https://www.listbox.com/member/?&;> > Your Subscription <http://www.listbox.com> > > ------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
