Dear Predrag, The simple answer is Yes. The BD drive (not a vanilla DVD) is mapped as SCSI Bus 2 with a target ID of 0.
I suspected USB 3.0 was the issue and suspect its impossible to downgrade. Yours sincerely John John G Ireland mobile: +44 (0) 771 206 9240 -----Original Message----- From: Predrag Zečević - Unix Systems Administrator [mailto:[email protected]] Sent: 09 March 2016 11:00 To: [email protected] Subject: Re: [discuss] Unable to Install on a bare-metal X86 On 03/ 9/16 11:58 AM, John G Ireland wrote: > Dear Rich, > > This is a Clevo Laptop with a P170EM motherboard running an I7-3740QM > processor @ 2.7GHz, 16GB ram with both an on board Intel HD Graphics > 4000 and NVidia GEFORCE GTX 675MX. There are two 1TB drives set up > as Raid 1 using the Intel Software and a 16GB Cache drive. The BIOS > is American Megatrands version 4.6.5 and the Chipset is Ivy Bridge > version > 09 with Southbridge HM77 version 04 > > It is currently configured to run Windows 10 (which is a real pain > requiring constant Cloud access). It loads and runs Linux but refuses > to load either OpenIndiana or Solaris 11. > > Having used OpenSolaris in the past on a 32 bit x86 Toshiba any help > to get OpenIndiana up and running would be appreciated > > Yours sincerely > John > John G Ireland > mobile: +44 (0) 771 206 9240 > > *From:*Rich [mailto:[email protected]] > *Sent:* 09 March 2016 02:42 > *To:* Illumos Discussion > *Subject:* Re: [discuss] Unable to Install on a bare-metal X86 > > What model of machine? > > A great many people have installed OpenIndiana in various flavors on > various x64 hardware without issue, so this is probably of interest to > someone if it's failing. > > - Rich > > On Tue, Mar 8, 2016 at 11:25 AM, John G Ireland > <[email protected] <mailto:[email protected]>> wrote: > > Any help please on how to install Indiana on a x64 machine WITHOUT > using VirtualBox. > > The install routine fails during Phase2 without any discernible error > messages – it just drop into the recover login > > Regards, > John > > *illumos-discuss* | Archives > <https://www.listbox.com/member/archive/182180/=now> > <https://www.listbox.com/member/archive/rss/182180/26621159-3a8f8bf9> > | Modify <https://www.listbox.com/member/?&;> > Your Subscription [Powered by Listbox] <http://www.listbox.com> > Hi all, i had recently problems, and those are mostly related to USB 3.0 not being good in legacy mode for USB 2.0 support ... As consequence, only GUI DVD installation was possible for me.... Have you also tried with DVD (e.g. not USB installation)? Regards. -- Predrag Zečević Technical Support Analyst 2e Systems GmbH Telephone: +49 6196 9505 815, Facsimile: +49 6196 9505 894 Mobile: +49 174 3109 288, Skype: predrag.zecevic E-mail: [email protected] Headquarter: 2e Systems GmbH, Königsteiner Str. 87, 65812 Bad Soden am Taunus, Germany Company registration: Amtsgericht Königstein (Germany), HRB 7303 Managing director: Phil Douglas http://www.2e-systems.com/ - Making your business fly! ------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
