Phil Leigh;359661 Wrote: > 185mV sensitivity is crazy! - even old Quads from the 60's had 250mV! My recollection is that line level input sensitivities around the 100mV mark was quite common back in the 70s. Most devices such as FM tuners and tape decks output fairly modest voltage levels. It was only when CD players arrived on the scene in the 80s that outputs of 1V and 2V became commonplace.
Phil Leigh;359661 Wrote: > Surely this can't be right - you need at least 2V for modern gear and > 10V would be a lot of headroom. 10V was the minimum overload capability you'd expect from a decent input with 100mV sensitivity. For a 2V input, 10V is only a little over 12dB of headroom, which is hardly adequate. -- cliveb Transporter -> ATC SCM100A ------------------------------------------------------------------------ cliveb's Profile: http://forums.slimdevices.com/member.php?userid=348 View this thread: http://forums.slimdevices.com/showthread.php?t=55023 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss