Currently the hardware for CSP1 has three DACs, one feeds the RCAs, one XLR+ and one XLR-. The same data gets sent to the RCA and XLR+ DACs, there is a hardware inversion on the way to the XLR- DAC. There is no provision for a user selectable inversion on the DATA stream. It COULD be done, but the board is already designed. Then there is how the user makes the selection. You can put a switch on the box itself. Or it can come from software. If it's software we have to take another signal off the processor into the carrier board. It certainly can be done, but it's again a change to the current implementation.
Then the software has to be written to flip that output pin of the processor. It would probably be easier to implement it in software. But that is up to Triode and JackOfAll. The off the shelf approach is to make an adapter to take single ended signals off the XLRs, selects either the + or - outputs. John S. ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=97881 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss