"Donley" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
Garey and Lee,

I also learned a lot here. If I had Googled the Tee M358 number listed in the manual, I would have learned that it is in fact a standard Amphenol UHF Tee available for about $4.00. Also, the manual shows the detector connected directly to the Tee so there is no coax between the two. There is coaxial cable between the detector and display unit. Am I correct in thinking that cable could just be low frequency audio cable?

Dick
KC9UB



----- Original Message ----- From: "Garey Barrell" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 30, 2007 3:59 PM
Subject: Re: [drakelist] Not a Drake question.



Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
Live and learn!

I assume you keep the Tee coax as short as possible.

73, Garey - K4OAH
Glen Allen, VA

Drake 2-B, 4-B & C-Line Service Supplement CDs
<www.k4oah.com>



[EMAIL PROTECTED] wrote:
The tee connector is a standard UHF tee, female/female/male (aka M358). All attenuation and protection of the HA8 takes place in the diode detector. Simple to put together using a "Pomona" box or surplus adapter box.

73
Lee WB6SSW


----------------------------------------------------------------------
Submissions:        [EMAIL PROTECTED]
Unsubscribe:        [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:    [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page:  www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------


----------------------------------------------------------------------
Submissions:        [EMAIL PROTECTED]
Unsubscribe:        [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:    [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page:  www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------

Reply via email to