Ron Wagner <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
FWIW, in John Loughmiller's (KB9AT) book "A Family Affair, the R L Drake
Story" on page 145, Steve Rawling, G4ALG is credited as saying that "To
enable the TR-7 to transmit on all frequencies 1.5-30 MHZ (excluding 2.5
and 5.0 Mhz bands) simply unsolder collector Q9001 on the DR7 board."
I beleive Jim's thread was to be able to add those bands back in with his
mods w/o defeating the out-of-lock inhibit. I know that my TR-7
(actually John's backup rig) is TX on all bands and the out-of-lock
inhibit is not cut. I just tried CW on the 2.5 and 5 Mhz bands and it
works fine. A caveat is that I do have an aux board installed with 10Mhz
prgrammed. My aux switch it in the normal position.
73,
Ron WD8SBB
----------------------------------------------------------------------
On Mon, 28 Jul 2008 03:26:20 -0400, Joe Pyles wrote:
Simply remove Q9001 from the DR7 board accomplishes the same thing without
cutting any traces and is
easily reversed.
This simply stops the TX inhibit signal from U9003 Ham Band PROM. 73, Joe
KC9LAD.
----------------------------------------------------------------------
Submissions: drakelist@zerobeat.net
Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost: [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------