I had the same situation on an L4. I did not know if the seal was needed or not but to be safe I installed a seal made from gasket material from an automotive shop.
Some one else might have a better or different idea. 73, Mike WA5POK > > As long as we are on the L4B - My project is to completely cleanup an > L4B (Serial # 6021 - about 1978) which I have had since the early > 1980s. It did not have any issues when I boxed it up about 1984. Now I > have opened it up and am cleaningit up - bsically a stiff paint brush > and vacuum cleaner. Along the base partitions below the finales, as > part of the cooling system, there were two rubber or fiber seals which > were held to the base cover with a tape adhesive. All that was left > was dust and the tape on the bottom case. > > Does anyone have a source for replacing this seal? Does this really > matter? Did all L4Bs have this seal or was it something a previous > owner added? > > Kris KA2OIG _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
