Guy, If you leave it on top, just put little feet on the fan to keep it from scraping the finish. You can also use grommets for spacers and small cable ties on the back of the final cage. You don't need a lot of air (aka noisy fan) just something to move the air a little.
73, Ron WD8SBB --- On Mon, 3/8/10, n9...@juno.com <n9...@juno.com> wrote: > From: n9...@juno.com <n9...@juno.com> > Subject: [Drakelist] Question on Drake TR-3 > To: drakelist@zerobeat.net > Date: Monday, March 8, 2010, 8:12 PM > I have a TR-3 that I just picked and > it up runs great. The question I have is the previous owner > installed a muffin fan directly above the finals on the top > cover which is set up to pull the air out of the finals > section. I have heard good and bad about doing this, it does > seem to keep the unit cooler but will it damage the finals > or anything else? Previous owner had ran it for years and he > said he had no problems. (of course it does take away from > the bueaty of the rig) > 73 Guy N9XBG > > ____________________________________________________________ > Medical Insurance > Need Medical Insurance? Click here for affordable quotes. > http://thirdpartyoffers.juno.com/TGL2131/c?cp=ManS0xdkCrkIj81uwWg18gAAJz0UFYKTAyySMiC3nbWXP64QAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAQVgAAAAA= > > _______________________________________________ > Drakelist mailing list > Drakelist@zerobeat.net > http://mailman.zerobeat.net/mailman/listinfo/drakelist > _______________________________________________ Drakelist mailing list Drakelist@zerobeat.net http://mailman.zerobeat.net/mailman/listinfo/drakelist
