Hi all, I still have some of the Belden 8421 cable left. I sell it for 10 cents an inch or $1.20 a foot plus shipping vis USPS from Payson, Arizona, 85541, USA. Please email me directly if you are interested.
Al, n7ioh On Mon, Jun 28, 2010 at 3:55 PM, Byron Tatum <bjtat...@att.net> wrote: > Hello- > Recently I was looking for a source of low capacitance cable to make up > a few "Injection" cables to couple the Drake twins together. I believe I was > informed of the original spec on this injection cable was 60 pF. total > capacity, 39" tip-to-tip, and Drake used a Belden microphone coaxial cable > to make them. I have been searching to no avail for the smaller cable, I do > not want to use the larger cables such as RG-62 if I can avoid it. Another > thing kind of threw me off track: I found a set of interconnects that were > supplied with a T-4XC, from Ed Mooray up in Ark. years back. They look like > the original Drake to me, and they have the marker tags on them. The > injection cable has a metal tag with "INJ" stamped on it on each end of it. > Physically the cable looked the same to me, with the molded connectors, etc. > I used my trusty AADE capacitance meter and the cable measured a whopping 97 > pF! > So, has anyone checked their original Drake cables to verify? Anyone > know of a source for smaller, low capacity cable? > Thanks, > Byron. > > _______________________________________________ > Drakelist mailing list > Drakelist@zerobeat.net > http://mailman.zerobeat.net/mailman/listinfo/drakelist > >
_______________________________________________ Drakelist mailing list Drakelist@zerobeat.net http://mailman.zerobeat.net/mailman/listinfo/drakelist