Lee -
The "Powermaster" is fairly easy to replicate, just a bunch of holes to
cut! I would just put an electrical contactor (any electrical supply
place, Home Depot?) in the a 'remote' box with a 240 VAC connector on it
(if needed) and then hard wire a power strip(s) to it.
The "Antenna Switch" is a little tougher. The original is a 24V DC
motor driving a custom rotary switch to control the motor, ground unused
antennas and switch the antenna. There are eight wires to the original
'remote'. A plain old rotary switch is a lot easier, although several
relays and a few connectors in a box could substitute for the remote.
The original remote is also designed for tower or other outdoor
mounting, which would save coax if you have four beams on your tower,
but ....
Which is why the basic C-4 without these accessories sells reasonably! :-)
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B, C-Line& TR-4/C Service Supplement CDs
<www.k4oah.com>
kc9...@aol.com wrote:
Hi gang...
OK, If I have just the console part of a C-4...ca I get or build the
remote switch and power box?
73,
Lee, KC9CDT
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
