Thanks Jim. That is a wonderful technical article. I will certainly follow it.
I have never soldered brass rod. Is it difficult? Any special solder required?
I really appreciate your assistance. 73, John, K5PGW
On Friday, January 17, 2014 9:50 PM, Jim Shorney <jshor...@inebraska.com> wrote:
This may be the droid you are looking for:
http://www.wb4hfn.com/DRAKE/DrakeArticles/TechTips/ElectrolyticRelacements.htm
73
-Jim
NU0C
On Fri, 17 Jan 2014 18:06:14 -0800 (PST), John King wrote:
>I have the power supply out of covers and the caps and mounts loose. Two of
>the eight cap previously changed. At least one 50K 50 watt bleeder appears
>open. I plan to replace all caps, diodes and resistors. Not interested in
>changing layout of supply or redesigning it physically.
>
>Is there a replacement board other than the one from Heath shop? I have eight
>new 470 MFD @ 450 VDC caps with both terminals + and - on the same end. New
>caps 105 degree rated about 1/2 the height of the original caps.
>
>Anyone have suggestions for a rebuild? Please reply directly. Thank and 73,
>John, K5PGW
>
--
The universe we're in will reach absolute zero in three hours. Safe is
relative. - Idris, "The Doctor's Wife"
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
