If anyone is interested I have a nicely built DDS VFO for the Drake C line. I have only programmed the 80M offset but it can do all the bands. I used it for a couple of years until I bought my TR-7. Output level was raised to provide the correct levels for the RX and TX.
The enclosure is ‘Drake Like’ and also has a switch to allow for a RX Only antenna. All teflon cables provided. It plugs in the R-4C accessory socket with a minor mod to the socket. Pix available. Dale W4OP From: Drakelist [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, December 5, 2019 10:40 PM To: 'Greg N9NWO'; [email protected] Subject: Re: [Drakelist] VFO for 2NT I have used the digital VFO kit from James Hagerty. It is really slick. I am also using a Micro Bitx to drive my Heath DX60B. This provides a receiver as well and not expensive. Dale K5AJZ From: Drakelist <[email protected]> On Behalf Of Greg N9NWO Sent: Wednesday, December 4, 2019 10:42 AM To: [email protected] Subject: [Drakelist] VFO for 2NT I have seen the Hallicrafters HA-5. Wondering if there were a modern VFO for crystal transmitters. I currently have a TR-7 and TR-4. Just bought a 2C/2NT and have a Heathkit HW-16 with VFO. N9NWO
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
