On Fri, Feb 11, 2011 at 10:57 AM, Justin Mattock
<justinmatt...@gmail.com> wrote:
>
>>
>> Better yet, can you try the attached patch on top of 2.6.38-rc4 or newer?
>>
>> Alex
>>
>
> o.k. applied that patch... unfortunately Im seeing the flickering screen and
> the crud shows up..
> initially during boot everything looked fine, its when I suspended the
> machine, upon wake-up
> the flickering occurred.
> kernel version is the current: 2.6.38-rc4-00107-gaa502b4
Can you try this patch? Try uncommenting the following lines to see
if either of those flags work any better. Try them individually and
together if possible and report back which, if any, helps.
/*pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;*/
/*if (ASIC_IS_AVIVO(rdev))
pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV;*/
Thanks!
Alex
>
> Justin P. Mattock
>
From b92bf64a4fc181c6a783cc0d51a6881fc8a353a7 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeuc...@gmail.com>
Date: Fri, 11 Feb 2011 20:10:11 -0500
Subject: [PATCH] drm/radeon/kms: hopefully fix pll issues for real (v2)
The problematic boards have a recommended reference divider
to be used when spread spectrum is enabled on the laptop panel.
Enable the use of the recommended reference divider along with
the new pll algo. This should hopefully fix the issues across
the board.
v2: add some options to uncomment and try
Signed-off-by: Alex Deucher <alexdeuc...@gmail.com>
Cc: sta...@kernel.org
---
drivers/gpu/drm/radeon/atombios_crtc.c | 21 ++++++++-------------
1 files changed, 8 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 1bf6122..afa4c34 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -531,6 +531,7 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+ /*pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;*/
} else {
pll->flags |= RADEON_PLL_LEGACY;
@@ -555,29 +556,27 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
dp_clock = dig_connector->dp_clock;
}
}
-/* this might work properly with the new pll algo */
-#if 0 /* doesn't work properly on some laptops */
+
/* use recommended ref_div for ss */
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
if (ss_enabled) {
if (ss->refdiv) {
pll->flags |= RADEON_PLL_USE_REF_DIV;
pll->reference_div = ss->refdiv;
+ /*if (ASIC_IS_AVIVO(rdev))
+ pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV;*/
}
}
}
-#endif
+
if (ASIC_IS_AVIVO(rdev)) {
/* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)
adjusted_clock = mode->clock * 2;
if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER;
- /* rv515 needs more testing with this option */
- if (rdev->family != CHIP_RV515) {
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
- pll->flags |= RADEON_PLL_IS_LCD;
- }
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ pll->flags |= RADEON_PLL_IS_LCD;
} else {
if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
@@ -957,11 +956,7 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode
/* adjust pixel clock as needed */
adjusted_clock = atombios_adjust_pll(crtc, mode, pll, ss_enabled, &ss);
- /* rv515 seems happier with the old algo */
- if (rdev->family == CHIP_RV515)
- radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
- &ref_div, &post_div);
- else if (ASIC_IS_AVIVO(rdev))
+ if (ASIC_IS_AVIVO(rdev))
radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
&ref_div, &post_div);
else
--
1.7.1.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
