On Feb 13, 2011, at 3:46 PM, Alex Deucher wrote:
On Sun, Feb 13, 2011 at 12:28 AM, Justin Mattock
<justinmatt...@gmail.com> wrote:
On Feb 11, 2011, at 5:15 PM, Alex Deucher wrote:
On Fri, Feb 11, 2011 at 10:57 AM, Justin Mattock
<justinmatt...@gmail.com> wrote:
Better yet, can you try the attached patch on top of 2.6.38-rc4 or
newer?
Alex
o.k. applied that patch... unfortunately Im seeing the flickering
screen
and
the crud shows up..
initially during boot everything looked fine, its when I
suspended the
machine, upon wake-up
the flickering occurred.
kernel version is the current: 2.6.38-rc4-00107-gaa502b4
Can you try this patch? Try uncommenting the following lines to see
if either of those flags work any better. Try them individually and
together if possible and report back which, if any, helps.
/*pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;*/
/*if (ASIC_IS_AVIVO(rdev))
pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV;*/
Thanks!
Alex
Justin P. Mattock
<0001-drm-radeon-kms-hopefully-fix-pll-issues-for-real-v2.patch>
alright.. again out of my office trying to make a living!!
Anyways I applied the two earlier patches, and added the previous
post's
patch as well
(everything runs o.k. s2r etc...)
I can try for the above and see if I can pinpoint the piece of code
that is
causing this(hopefully)
The attached patch is what I'm proposing to go upstream. Please test
and let me know if it works ok for you.
Alex
alright... bisect done, but something went wrong(must redu later)..
Anyways with your patch applied
everything looks good
Justin P. Mattock
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
