Hi Tomi, Am Dienstag, den 18.03.2014, 10:15 +0200 schrieb Tomi Valkeinen: > Add DT binding documentation for HDMI Connector. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com> > Reviewed-by: Archit Taneja <archit at ti.com> > --- > .../devicetree/bindings/video/hdmi-connector.txt | 28 > ++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/video/hdmi-connector.txt > > diff --git a/Documentation/devicetree/bindings/video/hdmi-connector.txt > b/Documentation/devicetree/bindings/video/hdmi-connector.txt > new file mode 100644 > index 000000000000..ccccc19e2573 > --- /dev/null > +++ b/Documentation/devicetree/bindings/video/hdmi-connector.txt > @@ -0,0 +1,28 @@ > +HDMI Connector > +============== > + > +Required properties: > +- compatible: "hdmi-connector" > +- type: the HDMI connector type: "a", "b", "c", "d" or "e" > + > +Optional properties: > +- label: a symbolic name for the connector > + > +Required nodes: > +- Video port for HDMI input
Geert's comment also applies to all other connector types. These can be input connectors, too. regards Philipp