Add DT binding documentation for DVI Connector.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
Reviewed-by: Archit Taneja <archit at ti.com>
---
.../devicetree/bindings/video/dvi-connector.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/dvi-connector.txt
diff --git a/Documentation/devicetree/bindings/video/dvi-connector.txt
b/Documentation/devicetree/bindings/video/dvi-connector.txt
new file mode 100644
index 000000000000..fc53f7c60bc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/dvi-connector.txt
@@ -0,0 +1,35 @@
+DVI Connector
+==============
+
+Required properties:
+- compatible: "dvi-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC
+- analog: the connector has DVI analog pins
+- digital: the connector has DVI digital pins
+- dual-link: the connector has pins for DVI dual-link
+
+Required nodes:
+- Video port for DVI input
+
+Note: One (or both) of 'analog' or 'digital' must be set.
+
+Example
+-------
+
+dvi0: connector at 0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+};
--
1.8.3.2
