On Mon, Nov 14, 2016 at 11:10:35AM +0100, Marek Vasut wrote:
> Add new DT bindings for new MXSFB driver that is using the
> OF graph to parse the video output structure instead of
> hard-coding the display properties into the MXSFB node.
> The old MXSFB fbdev driver bindings are preserved in the
> same file in the "Old bindings" section.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Rob Herring <robh at kernel.org>
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Shawn Guo <shawnguo at kernel.org>
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Cc: devicetree at vger.kernel.org
> --
> V2: - Merge the new bindings into mxsfb.txt file instead of keeping
>       them in separate mxsfb-drm.txt file.
>     - Add dedicated compatible for i.MX6SX
>     - Drop all references to DRM/KMS
>     - Repair the required bits in clock node
> ---
>  .../devicetree/bindings/display/mxsfb.txt          | 37 
> ++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt 
> b/Documentation/devicetree/bindings/display/mxsfb.txt
> index a4431f2..6e92593 100644
> --- a/Documentation/devicetree/bindings/display/mxsfb.txt
> +++ b/Documentation/devicetree/bindings/display/mxsfb.txt
> @@ -1,5 +1,42 @@
>  * Freescale MXS LCD Interface (LCDIF)
>  
> +New bindings:
> +=============
> +Required properties:
> +- compatible:        Should be "fsl,imx23-lcdif" for i.MX23.
> +             Should be "fsl,imx28-lcdif" for i.MX28.
> +             Should be "fsl,imx6sx-lcdif" for i.MX6SX.
> +- reg:               Address and length of the register set for lcdif

s/lcdif/LCDIF/

> +- interrupts:        Should contain lcdif interrupts

How many? 

> +- clocks:    A list of phandle + clock-specifier pairs, one for each
> +             entry in 'clock-names'.
> +- clock-names:       A list of clock names. For MXSFB it should contain:
> +    - "pix" for the MXSFB block clock

MXSFB is not a h/w block. LCDIF is the name.

> +    - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
> +
> +Required sub-nodes:
> +  - port: The connection to an encoder chip.
> +
> +Example:
> +
> +     lcdif1: lcdif at 02220000 {

display-controller at ...

Drop the leading 0 too.

> +             compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";

I'm not sure compatibility with mx28 is appropriate since you have the 
extra clocks. I guess if they don't need to be managed then it's okay.

> +             reg = <0x02220000 0x4000>;
> +             interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +             clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
> +                      <&clks IMX6SX_CLK_LCDIF_APB>,
> +                      <&clks IMX6SX_CLK_DISPLAY_AXI>;
> +             clock-names = "pix", "axi", "disp_axi";
> +
> +             port {
> +                     parallel_out: endpoint {
> +                             remote-endpoint = <&panel_in_parallel>;
> +                     };
> +             };
> +     };
> +
> +Old bindings:

s/Old/Deprecated/

> +=============
>  Required properties:
>  - compatible:        Should be "fsl,imx23-lcdif" for i.MX23.
>               Should be "fsl,imx28-lcdif" for i.MX28.
> -- 
> 2.10.2
> 

Reply via email to