On Sat, Jan 28, 2017 at 03:21:30PM +0100, Peter Senna Tschudin wrote: > Devicetree binding documentation for the second video output > of the GE B850v3: > STDP4028-ge-b850v3-fw bridges (LVDS-DP) > STDP2690-ge-b850v3-fw bridges (DP-DP++) > > Added entry for MegaChips at: > Documentation/devicetree/bindings/vendor-prefixes.txt
Your subject is so long I can't see anything useful. Begin with: dt-bindings: display: ... > > Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com> > Cc: Martyn Welch <martyn.we...@collabora.co.uk> > Cc: Martin Donnelly <martin.donne...@ge.com> > Cc: Javier Martinez Canillas <jav...@dowhile0.org> > Cc: Enric Balletbo i Serra <enric.balle...@collabora.com> > Cc: Philipp Zabel <p.za...@pengutronix.de> > Cc: Rob Herring <r...@kernel.org> > Cc: Fabio Estevam <fabio.este...@nxp.com> > Signed-off-by: Peter Senna Tschudin <peter.se...@collabora.com> > --- > .../devicetree/bindings/vendor-prefixes.txt | 1 + > .../bridge/megachips-stdpxxxx-ge-b850v3-fw.txt | 92 > ++++++++++++++++++++++ > 2 files changed, 93 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt > b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 1ef148d..b4c2f5c 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -175,6 +175,7 @@ maxim Maxim Integrated Products > mcube mCube > meas Measurement Specialties > mediatek MediaTek Inc. > +megachips MegaChips > melexis Melexis N.V. > melfas MELFAS Inc. > memsic MEMSIC Inc. > diff --git > a/Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt > > b/Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt > new file mode 100644 > index 0000000..471db27 > --- /dev/null > +++ > b/Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt bindings/video/ is gone (though a few things snuck in). This goes in bindings/display/bridge/. > @@ -0,0 +1,92 @@ > +Drivers for the second video output of the GE B850v3: > + STDP4028-ge-b850v3-fw bridges (LVDS-DP) > + STDP2690-ge-b850v3-fw bridges (DP-DP++) > + > +The video processing pipeline on the second output on the GE B850v3: > + > + Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output > + > +Each bridge has a dedicated flash containing firmware for supporting the > custom > +design. The result is that, in this design, neither the STDP4028 nor the > +STDP2690 behave as the stock bridges would. The compatible strings include > the > +suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges > with > +the firmware specific for the GE B850v3. > + > +The driver is powerless to control the video processing pipeline, as the two > +bridges behaves as a single one. The driver is only needed for telling the > host > +about EDID / HPD, and for giving the host powers to ack interrupts. Bindings describe h/w not drivers. Rephrase in terms of what control the h/w provides. > + > +Required properties: > + - compatible : should be "megachips,stdp4028-ge-b850v3-fw" or > + "megachips,stdp2690-ge-b850v3-fw". Reformat with one per line. > + - reg : should contain the main address which is used to communicate with > + the bridge over i2c. Just "reg : I2C bus address" is sufficient. > + - interrupt-parent : phandle of the interrupt controller that services > + interrupts to the device (stdp4028-ge-b850v3-fw) > + - interrupts : one interrupt should be described here, as in > + <0 IRQ_TYPE_LEVEL_HIGH> (stdp4028-ge-b850v3-fw) > + - ports : should describe the video signal connection between the host > + and the bridges. You need to define how many ports and what each port is. Rob _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
