On Mon, May 07, 2018 at 04:44:34PM +0200, Boris Brezillon wrote:
> Now that the plane code takes the underscan setup into account, we can
> safely attach the underscan props to the HDMI connector.
>
> We also take care of filling AVI infoframes correctly to expose the
> top/botton/left/right bar.
>
> Note that these underscan props match pretty well the
> overscan_{left,right,top,bottom} properties defined in config.txt and
> parsed by the VC4 firmware.
>
> Signed-off-by: Boris Brezillon <boris.brezil...@bootlin.com>
> ---
> drivers/gpu/drm/vc4/vc4_hdmi.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index 1a6db291d48b..17464b5981f9 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -323,6 +323,16 @@ static struct drm_connector
> *vc4_hdmi_connector_init(struct drm_device *dev,
> DRM_MODE_CONNECTOR_HDMIA);
> drm_connector_helper_add(connector, &vc4_hdmi_connector_helper_funcs);
>
> + /* The hborder and vborder limit is arbitrarily set to 1024 which
> + * should be more than enough for real use cases. Note that the actual
> + * limitation comes from the display mode:
> + * hborder < hdisplay && vborder < vdisplay
> + */
> + drm_connector_attach_underscan_properties(connector,
We should probably sprinkle __must_check over all these :-)
-Daniel
> + BIT(DRM_UNDERSCAN_OFF) |
> + BIT(DRM_UNDERSCAN_ON),
> + 1024, 1024);
> +
> connector->polled = (DRM_CONNECTOR_POLL_CONNECT |
> DRM_CONNECTOR_POLL_DISCONNECT);
>
> @@ -408,6 +418,9 @@ static void vc4_hdmi_write_infoframe(struct drm_encoder
> *encoder,
> static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
> {
> struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
> + struct vc4_dev *vc4 = encoder->dev->dev_private;
> + struct vc4_hdmi *hdmi = vc4->hdmi;
> + struct drm_connector_state *cstate = hdmi->connector->state;
> struct drm_crtc *crtc = encoder->crtc;
> const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
> union hdmi_infoframe frame;
> @@ -426,6 +439,18 @@ static void vc4_hdmi_set_avi_infoframe(struct
> drm_encoder *encoder)
> vc4_encoder->rgb_range_selectable,
> false);
>
> + if (cstate->underscan.mode == DRM_UNDERSCAN_ON) {
> + if (cstate->underscan.hborder) {
> + frame.avi.right_bar = cstate->underscan.hborder / 2;
> + frame.avi.left_bar = frame.avi.right_bar;
> + }
> +
> + if (cstate->underscan.vborder) {
> + frame.avi.top_bar = cstate->underscan.vborder / 2;
> + frame.avi.bottom_bar = frame.avi.top_bar;
> + }
> + }
> +
> vc4_hdmi_write_infoframe(encoder, &frame);
> }
>
> --
> 2.14.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
