[PATCH RESEND v2 11/12] arm64: allwinner: a64: enable LCD-related hardware for Pinebook

[Vasily Khoruzhick]

From: Icenowy Zheng <icen...@aosc.io>

Pinebook has an ANX6345 bridge connected to the RGB666 LCD output and
eDP panel input. The bridge is controlled via I2C that's connected to
R_I2C bus.

Enable all this hardware in device tree.

Signed-off-by: Icenowy Zheng <icen...@aosc.io>
Signed-off-by: Vasily Khoruzhick <anars...@gmail.com>
---
 .../dts/allwinner/sun50i-a64-pinebook.dts     | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index d22736a62481..49f5d4b0c7f4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -63,6 +63,18 @@
                };
        };
 
+       edp_panel: edp-panel {
+               compatible = "panel-edp", "simple-panel";
+               backlight = <&backlight>;
+               power-supply = <&reg_dc1sw>;
+
+               port {
+                       panel_in_edp: endpoint {
+                               remote-endpoint = <&anx6345_out_panel>;
+                       };
+               };
+       };
+
        reg_vcc3v3: vcc3v3 {
                compatible = "regulator-fixed";
                regulator-name = "vcc3v3";
@@ -102,6 +114,10 @@
        status = "okay";
 };
 
+&de {
+       status = "okay";
+};
+
 &ehci0 {
        phys = <&usbphy 0>;
        phy-names = "usb";
@@ -112,6 +128,10 @@
        status = "okay";
 };
 
+&mixer0 {
+       status = "okay";
+};
+
 &mmc0 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc0_pins>;
@@ -163,6 +183,46 @@
        status = "okay";
 };
 
+&r_i2c {
+       pinctrl-names = "default";
+       pinctrl-0 = <&r_i2c_pins_a>;
+       status = "okay";
+
+       anx6345: anx6345@38 {
+               compatible = "analogix,anx6345";
+               reg = <0x38>;
+               reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+               dvdd25-supply = <&reg_dldo2>;
+               dvdd12-supply = <&reg_fldo1>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       anx6345_in: port@0 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <0>;
+                               anx6345_in_tcon0: endpoint@0 {
+                                       reg = <0>;
+                                       remote-endpoint = <&tcon0_out_anx6345>;
+                               };
+                       };
+
+                       anx6345_out: port@1 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <1>;
+
+                               anx6345_out_panel: endpoint@0 {
+                                       reg = <0>;
+                                       remote-endpoint = <&panel_in_edp>;
+                               };
+                       };
+               };
+       };
+};
+
 &r_rsb {
        status = "okay";
 
@@ -334,6 +394,20 @@
                        "MIC2", "Internal Microphone Right";
 };
 
+&tcon0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&lcd_rgb666_pins>;
+
+       status = "okay";
+};
+
+&tcon0_out {
+       tcon0_out_anx6345: endpoint@0 {
+               reg = <0>;
+               remote-endpoint = <&anx6345_in_tcon0>;
+       };
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pb_pins>;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel