On Mon, Feb 4, 2019 at 8:39 AM Rob Herring <robh...@kernel.org> wrote:
>
> On Mon, Feb 4, 2019 at 10:11 AM Vasily Khoruzhick <anars...@gmail.com> wrote:
> >
> > On Mon, Feb 4, 2019 at 12:24 AM Thierry Reding <thierry.red...@gmail.com> 
> > wrote:
> > > >
> > > > Pinebook used several 768p panels that have slightly different timings
> > > > and recent batch uses 1080p panel.
> > > >
> > > > What panel descriptor should I use as fallback?
> > >
> > > You don't use panel descriptors as fallback. The simple-panel driver
> > > will bind to a panel device and use the corresponding descriptor. If
> > > your device tree contains the correct information, the descriptor is
> > > correct for the panel you have.
> > >
> > > In other words you need to ensure that you have the correct panel in
> > > device tree for the board that you're using. This is exactly the same
> > > thing as for other devices.
> > >
> > > One way to to this is to have separate device trees for each variant
> > > of the board that you want to support. Another variant may be to have
> > > a common device tree and then have some early firmware update the DTB
> > > with the correct panel information.
> >
> > That defeats the purpose of using eDP panels. Panel can identify
> > itself and report what timings it supports.
>
> If you are confident that this works for all panels, then the firmware
> can identify the right panel and update the DTB with the correct
> information. If this doesn't work in the firmware, then it is not
> going to work in the kernel either and you are SOL without specific
> panel information in the DT.

"firmware" is u-boot and on this platform it sits on the same physical
media as OS (it's either microsd or eMMC).

I guess u-boot can fill in timings for kernel, but I don't see much
point in it. If u-boot can't read EDID then same is true
for kernel.

> > If we use separate DTBs then users will have to figure out what panel
> > is installed in their hardware and use appropriate software image -
> > that's something I'd like to avoid.
>
> I think Thierry meant either way this is a firmware problem. If you
> have a SKU per device and panel type, then the firmware just picks a
> dtb among a set.

Unfortunately it's one SKU per multiple panels.

> Rob
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to