These were missing '\n' terminations, add them.
Signed-off-by: Joe Perches <j...@perches.com>
---
drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
index 158a6d548068..d88ea8da2ec2 100644
--- a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
+++ b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
@@ -123,7 +123,7 @@ static int jh057n_init_sequence(struct jh057n *ctx)
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to exit sleep mode");
+ DRM_DEV_ERROR(dev, "Failed to exit sleep mode\n");
return ret;
}
/* Panel is operational 120 msec after reset */
@@ -132,7 +132,7 @@ static int jh057n_init_sequence(struct jh057n *ctx)
if (ret)
return ret;
- DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done");
+ DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
return 0;
}
@@ -172,7 +172,7 @@ static int jh057n_prepare(struct drm_panel *panel)
if (ctx->prepared)
return 0;
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel.");
+ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
usleep_range(20, 40);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
@@ -180,7 +180,8 @@ static int jh057n_prepare(struct drm_panel *panel)
ret = jh057n_init_sequence(ctx);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d", ret);
+ DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
+ ret);
return ret;
}
@@ -212,7 +213,7 @@ static int jh057n_get_modes(struct drm_panel *panel)
mode = drm_mode_duplicate(panel->drm, &default_mode);
if (!mode) {
- DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u",
+ DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
default_mode.vrefresh);
return -ENOMEM;
@@ -241,7 +242,7 @@ static int allpixelson_set(void *data, u64 val)
struct jh057n *ctx = data;
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on");
+ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
msleep(val * 1000);
/* Reset the panel to get video back */
@@ -290,7 +291,7 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
- DRM_DEV_ERROR(dev, "cannot get reset gpio");
+ DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
@@ -315,12 +316,12 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?");
+ DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?\n");
drm_panel_remove(&ctx->panel);
return ret;
}
- DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready",
+ DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
default_mode.hdisplay, default_mode.vdisplay,
default_mode.vrefresh,
mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
