On Thu, Apr 04, 2019 at 05:48:50PM +0200, Guido Günther wrote:
> Hi Joe,
> On Thu, Apr 04, 2019 at 08:06:09AM -0700, Joe Perches wrote:
> > These were missing '\n' terminations, add them.
> >
> > Signed-off-by: Joe Perches <j...@perches.com>
> > ---
> > drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c | 19 ++++++++++---------
> > 1 file changed, 10 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
> > b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
> > index 158a6d548068..d88ea8da2ec2 100644
> > --- a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
> > +++ b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
> > @@ -123,7 +123,7 @@ static int jh057n_init_sequence(struct jh057n *ctx)
> >
> > ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> > if (ret < 0) {
> > - DRM_DEV_ERROR(dev, "Failed to exit sleep mode");
> > + DRM_DEV_ERROR(dev, "Failed to exit sleep mode\n");
> > return ret;
> > }
> > /* Panel is operational 120 msec after reset */
> > @@ -132,7 +132,7 @@ static int jh057n_init_sequence(struct jh057n *ctx)
> > if (ret)
> > return ret;
> >
> > - DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done");
> > + DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
> > return 0;
> > }
> >
> > @@ -172,7 +172,7 @@ static int jh057n_prepare(struct drm_panel *panel)
> > if (ctx->prepared)
> > return 0;
> >
> > - DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel.");
> > + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
> > gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> > usleep_range(20, 40);
> > gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> > @@ -180,7 +180,8 @@ static int jh057n_prepare(struct drm_panel *panel)
> >
> > ret = jh057n_init_sequence(ctx);
> > if (ret < 0) {
> > - DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d", ret);
> > + DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
> > + ret);
> > return ret;
> > }
> >
> > @@ -212,7 +213,7 @@ static int jh057n_get_modes(struct drm_panel *panel)
> >
> > mode = drm_mode_duplicate(panel->drm, &default_mode);
> > if (!mode) {
> > - DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u",
> > + DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
> > default_mode.hdisplay, default_mode.vdisplay,
> > default_mode.vrefresh);
> > return -ENOMEM;
> > @@ -241,7 +242,7 @@ static int allpixelson_set(void *data, u64 val)
> > struct jh057n *ctx = data;
> > struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> >
> > - DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on");
> > + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
> > dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
> > msleep(val * 1000);
> > /* Reset the panel to get video back */
> > @@ -290,7 +291,7 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
> >
> > ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> > if (IS_ERR(ctx->reset_gpio)) {
> > - DRM_DEV_ERROR(dev, "cannot get reset gpio");
> > + DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
> > return PTR_ERR(ctx->reset_gpio);
> > }
> >
> > @@ -315,12 +316,12 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
> >
> > ret = mipi_dsi_attach(dsi);
> > if (ret < 0) {
> > - DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?");
> > + DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?\n");
> > drm_panel_remove(&ctx->panel);
> > return ret;
> > }
> >
> > - DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready",
> > + DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
> > default_mode.hdisplay, default_mode.vdisplay,
> > default_mode.vrefresh,
> > mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
> >
>
> Reviewed-By: Guido Günther <a...@sigxcpu.org>Nit: the correct tag is "Reviewed-by:", note the lowercase "by". I only noticed because checkpatch complained, and fixed it up. Thierry
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
