Hi Andrzej, On Fri, Oct 11, 2019 at 01:21:43PM +0200, Andrzej Hajda wrote: > On 11.10.2019 04:21, Xin Ji wrote: > > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed > > for portable device. It converts MIPI to DisplayPort 1.3 4K. > > > > You can add support to your board with binding. > > > > Example: > > anx7625_bridge: encoder@58 { > > compatible = "analogix,anx7625"; > > reg = <0x58>; > > status = "okay"; > > panel-flags = <1>; > > enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; > > reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; > > #address-cells = <1>; > > #size-cells = <0>; > > > > port@0 { > > reg = <0>; > > anx_1_in: endpoint { > > remote-endpoint = <&mipi_dsi>; > > }; > > }; > > > > port@3 { > > reg = <3>; > > anx_1_out: endpoint { > > remote-endpoint = <&panel_in>; > > }; > > }; > > }; > > > > Signed-off-by: Xin Ji <x...@analogixsemi.com> > > --- > > .../bindings/display/bridge/anx7625.yaml | 96 > > ++++++++++++++++++++++ > > 1 file changed, 96 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/display/bridge/anx7625.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/anx7625.yaml > > b/Documentation/devicetree/bindings/display/bridge/anx7625.yaml > > new file mode 100644 > > index 0000000..fc84683 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bridge/anx7625.yaml > > @@ -0,0 +1,96 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +# Copyright 2019 Analogix Semiconductor, Inc. > > +%YAML 1.2 > > +--- > > +$id: "http://devicetree.org/schemas/display/bridge/anx7625.yaml#" > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > + > > +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter) > > + > > +maintainers: > > + - Xin Ji <x...@analogixsemi.com> > > + > > +description: | > > + The ANX7625 is an ultra-low power 4K Mobile HD Transmitter > > + designed for portable devices. > > + > > +properties: > > + "#address-cells": true > > + "#size-cells": true > > + > > + compatible: > > + items: > > + - const: analogix,anx7625 > > + > > + reg: > > + maxItems: 1 > > + > > + panel-flags: > > + description: indicate the panel is internal or external > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + enable-gpios: > > + description: used for power on chip control, POWER_EN pin D2. > > + maxItems: 1 > > + > > + reset-gpios: > > + description: used for reset chip control, RESET_N pin B7. > > + maxItems: 1 > > + > > + port@0: > > + type: object > > + description: > > + A port node pointing to MIPI DSI host port node. > > + > > + port@1: > > + type: object > > + description: > > + A port node pointing to MIPI DPI host port node. > > + > > + port@2: > > + type: object > > + description: > > + A port node pointing to external connector port node. > > + > > + port@3: > > + type: object > > + description: > > + A port node pointing to eDP port node. > > > Decrypting available product brief[1], there are following physical lines: > > Input: > > - MIPI DSI/DPI - video data, are DSI and DPI lines shared?
It would be much easier if we could have access to more complete information. I believe the DSI and DPI pins could be muxed, but there should be more DPI pins than DSI pins. > > - I2S - audio data, > > - I2C - control line, > > - ALERT/INTP - interrupt, > > - USB 3.1 SSRc/Tx - for USB forwarding, > > Output: > > - SS1, SS2, > > - SBU/AUX, > > - CC1/2. > > > Having this information I try to understand ports defined by you: > > - port@2 you have defined as pointing to external port, but here the > port should be rather subnode of ANX7625 - the chip has CC lines, see > beginning of [2]. > > - port@3 describes SS1, SS2 and SBU/AUX lines together, am I right? In > USB-C binding SBU and SS lines are represented by different ports, > different approach, but maybe better in this case. I believe that, when connected to a DP display (either DP or eDP), the DisplayPort signals are output on SS1 and/or SS2. I this really wonder if we need two separate ports for this, it seems that port@2 and port@3 should be merged. > Maybe it would be good to add 2nd example with USB-C port. That would help with the discussion, yes. > [1]: > https://www.analogix.com/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf > > [2]: Documentation/devicetree/bindings/connector/usb-connector.txt > > > + > > +required: > > + - "#address-cells" > > + - "#size-cells" > > + - compatible > > + - reg > > + - port@0 > > + - port@3 > > + > > +example: > > + - | > > + anx7625_bridge: encoder@58 { > > + compatible = "analogix,anx7625"; > > + reg = <0x58>; > > + status = "okay"; > > + panel-flags = <1>; > > + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; > > + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + anx_1_in: endpoint { > > + remote-endpoint = <&mipi_dsi>; > > + }; > > + }; > > + > > + port@3 { > > + reg = <3>; > > + anx_1_out: endpoint { > > + remote-endpoint = <&panel_in>; > > + }; > > + }; > > + }; -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel