Hi Sam,
On Sun, Jun 21, 2020 at 10:40:00AM +0200, Sam Ravnborg wrote:
> On Tue, May 26, 2020 at 04:15:05AM +0300, Laurent Pinchart wrote:
> > The DRM CRTC helpers add default modes to connectors in the connected
> > state if no mode can be retrieved from the connector. This behaviour is
> > useful for VGA or DVI outputs that have no connected DDC bus. However,
> > in such cases, the status of the output usually can't be retrieved and
> > is reported as connector_status_unknown.
> >
> > Extend the addition of default modes to connectors in an unknown state
> > to support outputs that can retrieve neither the modes nor the
> > connection status.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
>
> From your description sounds like an OK approach.
> But this is not something I feel too familiar with.
> Acked-by: Sam Ravnborg <s...@ravnborg.org>
Thanks for the ack. I'd like to have Daniel's (CC'ed) feedback on this
too.
> > ---
> > drivers/gpu/drm/drm_probe_helper.c | 3 ++-
> > include/drm/drm_modeset_helper_vtables.h | 8 +++++++-
> > 2 files changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_probe_helper.c
> > b/drivers/gpu/drm/drm_probe_helper.c
> > index f5d141e0400f..9055d9573c90 100644
> > --- a/drivers/gpu/drm/drm_probe_helper.c
> > +++ b/drivers/gpu/drm/drm_probe_helper.c
> > @@ -491,7 +491,8 @@ int drm_helper_probe_single_connector_modes(struct
> > drm_connector *connector,
> > if (count == 0 && connector->status == connector_status_connected)
> > count = drm_add_override_edid_modes(connector);
> >
> > - if (count == 0 && connector->status == connector_status_connected)
> > + if (count == 0 && (connector->status == connector_status_connected ||
> > + connector->status == connector_status_unknown))
> > count = drm_add_modes_noedid(connector, 1024, 768);
> > count += drm_helper_probe_add_cmdline_mode(connector);
> > if (count == 0)
> > diff --git a/include/drm/drm_modeset_helper_vtables.h
> > b/include/drm/drm_modeset_helper_vtables.h
> > index 421a30f08463..afe55e2e93d2 100644
> > --- a/include/drm/drm_modeset_helper_vtables.h
> > +++ b/include/drm/drm_modeset_helper_vtables.h
> > @@ -876,13 +876,19 @@ struct drm_connector_helper_funcs {
> > * The usual way to implement this is to cache the EDID retrieved in the
> > * probe callback somewhere in the driver-private connector structure.
> > * In this function drivers then parse the modes in the EDID and add
> > - * them by calling drm_add_edid_modes(). But connectors that driver a
> > + * them by calling drm_add_edid_modes(). But connectors that drive a
> > * fixed panel can also manually add specific modes using
> > * drm_mode_probed_add(). Drivers which manually add modes should also
> > * make sure that the &drm_connector.display_info,
> > * &drm_connector.width_mm and &drm_connector.height_mm fields are
> > * filled in.
> > *
> > + * Note that the caller function will automatically add standard VESA
> > + * DMT modes up to 1024x768 if the .get_modes() helper operation returns
> > + * no mode and if the connector status is connector_status_connected or
> > + * connector_status_unknown. There is no need to call
> > + * drm_add_edid_modes() manually in that case.
> > + *
> > * Virtual drivers that just want some standard VESA mode with a given
> > * resolution can call drm_add_modes_noedid(), and mark the preferred
> > * one using drm_set_preferred_mode().
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
