All panels shall report a connector type.
panel-simple has a lot of panels with no connector_type,
and for these fall back to DPI as the default.
v2:
- Rebased on top of validation of panel description
Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Thierry Reding <thierry.red...@gmail.com>
Cc: Sam Ravnborg <s...@ravnborg.org>
---
drivers/gpu/drm/panel/panel-simple.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index a8d68102931e..56ab073e4e6e 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -500,6 +500,7 @@ static int panel_simple_probe(struct device *dev, const
struct panel_desc *desc)
struct panel_simple *panel;
struct display_timing dt;
struct device_node *ddc;
+ int connector_type;
u32 bus_flags;
int err;
@@ -550,10 +551,12 @@ static int panel_simple_probe(struct device *dev, const
struct panel_desc *desc)
panel_simple_parse_panel_timing_node(dev, panel, &dt);
}
+ connector_type = desc->connector_type;
/* Catch common mistakes for panels. */
- switch (desc->connector_type) {
+ switch (connector_type) {
case 0:
dev_warn(dev, "Specify missing connector_type\n");
+ connector_type = DRM_MODE_CONNECTOR_DPI;
break;
case DRM_MODE_CONNECTOR_LVDS:
WARN_ON(desc->bus_flags &
@@ -600,11 +603,11 @@ static int panel_simple_probe(struct device *dev, const
struct panel_desc *desc)
break;
default:
dev_warn(dev, "Specify a valid connector_type: %d\n",
desc->connector_type);
+ connector_type = DRM_MODE_CONNECTOR_DPI;
break;
}
- drm_panel_init(&panel->base, dev, &panel_simple_funcs,
- desc->connector_type);
+ drm_panel_init(&panel->base, dev, &panel_simple_funcs, connector_type);
err = drm_panel_of_backlight(&panel->base);
if (err)
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
