Hi Sam,
Thank you for the patch.
On Sun, Jul 26, 2020 at 10:33:10PM +0200, Sam Ravnborg wrote:
> Warn if we detect a panel with incomplete/wrong description.
> This is inspired by a similar patch by Laurent that introduced checks
> for LVDS panels - this extends the checks to the remaining type of
> connectors.
>
> This is known to warn for some of the existing panels but added
> despite this as we need help from people using the panels to
> add the missing info.
> The checks are not complete but will catch the most common mistakes.
>
> The checks at the same time serves as documentation for the minimum
s/serves/serve/
> required description for a panel.
>
> The checks uses dev_warn() as we know this will hit. WARN() was
> too noisy at the moment for anything else than LVDS.
>
> v2:
> - Use dev_warn (Laurent)
> - Check for empty bus_flags
>
> Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> Cc: Thierry Reding <thierry.red...@gmail.com>
> Cc: Sam Ravnborg <s...@ravnborg.org>
> ---
> drivers/gpu/drm/panel/panel-simple.c | 41 ++++++++++++++++++++++++++--
> 1 file changed, 39 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index 54323515ca2c..a8d68102931e 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -500,6 +500,7 @@ static int panel_simple_probe(struct device *dev, const
> struct panel_desc *desc)
> struct panel_simple *panel;
> struct display_timing dt;
> struct device_node *ddc;
> + u32 bus_flags;
> int err;
>
> panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
> @@ -549,8 +550,12 @@ static int panel_simple_probe(struct device *dev, const
> struct panel_desc *desc)
> panel_simple_parse_panel_timing_node(dev, panel, &dt);
> }
>
> - if (desc->connector_type == DRM_MODE_CONNECTOR_LVDS) {
> - /* Catch common mistakes for LVDS panels. */
> + /* Catch common mistakes for panels. */
> + switch (desc->connector_type) {
> + case 0:
> + dev_warn(dev, "Specify missing connector_type\n");
> + break;
> + case DRM_MODE_CONNECTOR_LVDS:
> WARN_ON(desc->bus_flags &
> ~(DRM_BUS_FLAG_DE_LOW |
> DRM_BUS_FLAG_DE_HIGH |
> @@ -564,6 +569,38 @@ static int panel_simple_probe(struct device *dev, const
> struct panel_desc *desc)
> WARN_ON((desc->bus_format == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ||
> desc->bus_format == MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA)
> &&
> desc->bpc != 8);
> + break;
> + case DRM_MODE_CONNECTOR_eDP:
> + if (desc->bus_format == 0)
> + dev_warn(dev, "Specify missing bus_format\n");
> + if (desc->bpc != 6 && desc->bpc != 8)
> + dev_warn(dev, "Expected bpc in {6,8} but got: %d\n",
> desc->bpc);
bpc is unsigned, so s/%d/%u/
> + break;
> + case DRM_MODE_CONNECTOR_DSI:
> + if (desc->bpc != 6 && desc->bpc != 8)
> + dev_warn(dev, "Expected bpc in {6,8} but got: %d\n",
> desc->bpc);
Same here.
> + break;
> + case DRM_MODE_CONNECTOR_DPI:
> + bus_flags = DRM_BUS_FLAG_DE_LOW |
> + DRM_BUS_FLAG_DE_HIGH |
> + DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
> + DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
> + DRM_BUS_FLAG_DATA_MSB_TO_LSB |
> + DRM_BUS_FLAG_DATA_LSB_TO_MSB |
> + DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE |
> + DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
> + if (desc->bus_flags & ~bus_flags)
> + dev_warn(dev, "Unexpected bus_flags(%d)\n",
> desc->bus_flags & ~bus_flags);
> + if (!(desc->bus_flags & bus_flags))
> + dev_warn(dev, "Specify missing bus_flags\n");
> + if (desc->bus_format == 0)
> + dev_warn(dev, "Specify missing bus_format\n");
> + if (desc->bpc != 6 && desc->bpc != 8)
> + dev_warn(dev, "Expected bpc in {6,8} but got: %d\n",
> desc->bpc);
And here too.
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> + break;
> + default:
> + dev_warn(dev, "Specify a valid connector_type: %d\n",
> desc->connector_type);
> + break;
> }
>
> drm_panel_init(&panel->base, dev, &panel_simple_funcs,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
