Hi Biju, Thank you for the patch.
On Mon, Aug 10, 2020 at 04:22:18PM +0100, Biju Das wrote: > Add the support for enabling optional regulator that may be used as VCC > source. > > Signed-off-by: Biju Das <biju.das...@bp.renesas.com> > --- > New Patch Ref: Ref:https://patchwork.kernel.org/patch/11705819/ > --- > drivers/gpu/drm/bridge/lvds-codec.c | 29 +++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c > b/drivers/gpu/drm/bridge/lvds-codec.c > index 24fb1befdfa2..5858a29aafe6 100644 > --- a/drivers/gpu/drm/bridge/lvds-codec.c > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > @@ -10,13 +10,16 @@ > #include <linux/of_device.h> > #include <linux/of_graph.h> > #include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > > #include <drm/drm_bridge.h> > #include <drm/drm_panel.h> > > struct lvds_codec { > + struct device *dev; > struct drm_bridge bridge; > struct drm_bridge *panel_bridge; > + struct regulator *vcc; > struct gpio_desc *powerdown_gpio; > u32 connector_type; > }; > @@ -38,6 +41,14 @@ static int lvds_codec_attach(struct drm_bridge *bridge, > static void lvds_codec_enable(struct drm_bridge *bridge) > { > struct lvds_codec *lvds_codec = to_lvds_codec(bridge); > + int ret; > + > + ret = regulator_enable(lvds_codec->vcc); > + if (ret) { > + dev_err(lvds_codec->dev, > + "Failed to enable regulator \"vcc\": %d\n", ret); > + return; > + } > > if (lvds_codec->powerdown_gpio) > gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); > @@ -46,9 +57,15 @@ static void lvds_codec_enable(struct drm_bridge *bridge) > static void lvds_codec_disable(struct drm_bridge *bridge) > { > struct lvds_codec *lvds_codec = to_lvds_codec(bridge); > + int ret; > > if (lvds_codec->powerdown_gpio) > gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); > + > + ret = regulator_disable(lvds_codec->vcc); > + if (ret) > + dev_err(lvds_codec->dev, > + "Failed to disable regulator \"vcc\": %d\n", ret); > } > > static const struct drm_bridge_funcs funcs = { > @@ -63,12 +80,24 @@ static int lvds_codec_probe(struct platform_device *pdev) > struct device_node *panel_node; > struct drm_panel *panel; > struct lvds_codec *lvds_codec; > + int error; The driver tends to use "ret" for error status variables. If you're fine with this change there's no need to resubmit the patch, I can fix when applying. Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> > > lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); > if (!lvds_codec) > return -ENOMEM; > > + lvds_codec->dev = &pdev->dev; > lvds_codec->connector_type = (uintptr_t)of_device_get_match_data(dev); > + > + lvds_codec->vcc = devm_regulator_get(lvds_codec->dev, "vcc"); > + if (IS_ERR(lvds_codec->vcc)) { > + error = PTR_ERR(lvds_codec->vcc); > + if (error != -EPROBE_DEFER) > + dev_err(lvds_codec->dev, > + "Unable to get \"vcc\" supply: %d\n", error); > + return error; > + } > + > lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", > GPIOD_OUT_HIGH); > if (IS_ERR(lvds_codec->powerdown_gpio)) { -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
