Hi Laurent, Thanks for the feedback.
> Subject: Re: [PATCH v2 2/3] drm/bridge: lvds-codec: Add support for > regulator > > Hi Biju, > > Thank you for the patch. > > On Mon, Aug 10, 2020 at 04:22:18PM +0100, Biju Das wrote: > > Add the support for enabling optional regulator that may be used as > > VCC source. > > > > Signed-off-by: Biju Das <biju.das...@bp.renesas.com> > > --- > > New Patch Ref: Ref:https://patchwork.kernel.org/patch/11705819/ > > --- > > drivers/gpu/drm/bridge/lvds-codec.c | 29 > > +++++++++++++++++++++++++++++ > > 1 file changed, 29 insertions(+) > > > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c > > b/drivers/gpu/drm/bridge/lvds-codec.c > > index 24fb1befdfa2..5858a29aafe6 100644 > > --- a/drivers/gpu/drm/bridge/lvds-codec.c > > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > > @@ -10,13 +10,16 @@ > > #include <linux/of_device.h> > > #include <linux/of_graph.h> > > #include <linux/platform_device.h> > > +#include <linux/regulator/consumer.h> > > > > #include <drm/drm_bridge.h> > > #include <drm/drm_panel.h> > > > > struct lvds_codec { > > +struct device *dev; > > struct drm_bridge bridge; > > struct drm_bridge *panel_bridge; > > +struct regulator *vcc; > > struct gpio_desc *powerdown_gpio; > > u32 connector_type; > > }; > > @@ -38,6 +41,14 @@ static int lvds_codec_attach(struct drm_bridge > > *bridge, static void lvds_codec_enable(struct drm_bridge *bridge) { > > struct lvds_codec *lvds_codec = to_lvds_codec(bridge); > > +int ret; > > + > > +ret = regulator_enable(lvds_codec->vcc); > > +if (ret) { > > +dev_err(lvds_codec->dev, > > +"Failed to enable regulator \"vcc\": %d\n", ret); > > +return; > > +} > > > > if (lvds_codec->powerdown_gpio) > > gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, > 0); @@ -46,9 > > +57,15 @@ static void lvds_codec_enable(struct drm_bridge *bridge) > > static void lvds_codec_disable(struct drm_bridge *bridge) { > > struct lvds_codec *lvds_codec = to_lvds_codec(bridge); > > +int ret; > > > > if (lvds_codec->powerdown_gpio) > > gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, > 1); > > + > > +ret = regulator_disable(lvds_codec->vcc); > > +if (ret) > > +dev_err(lvds_codec->dev, > > +"Failed to disable regulator \"vcc\": %d\n", ret); > > } > > > > static const struct drm_bridge_funcs funcs = { @@ -63,12 +80,24 @@ > > static int lvds_codec_probe(struct platform_device *pdev) > > struct device_node *panel_node; > > struct drm_panel *panel; > > struct lvds_codec *lvds_codec; > > +int error; > > The driver tends to use "ret" for error status variables. If you're fine with > this > change there's no need to resubmit the patch, I can fix when applying. Yes, I am ok with that. Cheers, Biju > Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> > Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
