Add support for Mixel MIPI DPHY + LVDS PHY combo IP as found on Freescale i.MX8qxp SoC.
Cc: Guido Günther <a...@sigxcpu.org> Cc: Kishon Vijay Abraham I <kis...@ti.com> Cc: Vinod Koul <vk...@kernel.org> Cc: Rob Herring <robh...@kernel.org> Cc: NXP Linux Team <linux-...@nxp.com> Signed-off-by: Liu Ying <victor....@nxp.com> --- Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt index 9b23407..0afce99 100644 --- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt @@ -4,9 +4,13 @@ The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the MIPI-DSI IP from Northwest Logic). It represents the physical layer for the electrical signals for DSI. +The Mixel PHY IP block found on i.MX8qxp is a combo PHY that can work +in either MIPI-DSI PHY mode or LVDS PHY mode. + Required properties: -- compatible: Must be: +- compatible: Should be one of: - "fsl,imx8mq-mipi-dphy" + - "fsl,imx8qxp-mipi-dphy" - clocks: Must contain an entry for each entry in clock-names. - clock-names: Must contain the following entries: - "phy_ref": phandle and specifier referring to the DPHY ref clock @@ -14,6 +18,8 @@ Required properties: - #phy-cells: number of cells in PHY, as defined in Documentation/devicetree/bindings/phy/phy-bindings.txt this must be <0> +- fsl,syscon: Phandle to a system controller, as required by the PHY + in i.MX8qxp SoC. Optional properties: - power-domains: phandle to power domain -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
